• Journal of Korean Institute of Industrial Engineers
• /
• v.36 no.4
• /
• pp.243-247
• /
• 2010

Every products, which made by mass production, is not identical in their size but have variations in some intervals specified by tolerance dimensions. Tolerances play major role in standardization of part and its quality, and also make a huge impact on manufacturing cost. The optimal condition for tolerances is giving the values as loose as possible for low production cost while satisfying quality specification, which usually demand tight control of tolerances. Tolerance analysis is necessary to get an optimal solution for this conflict situation. This paper have studied tolerance analysis for universal joint assembly of vehicle steering system and tried to find useful results of the study for product design and quality control.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.264-265
• /
• 2006

This paper presents direct load control algorithm based locational and electric load characteristics. Direct load control is defined that demand-side management program activities that can interrupt consumer load at the time of annual peak load by direct control of the utility system operator by interruption power supply to individual appliances or equipment on consumer premises. Korean power system is divided into 14-areas considering branches operating in KEPCO, and electric loads are classified into 19 load groups considering interruption costs in this paper. The purpose of proposed method is to decrease social losses by controlling electric loads mainly whose interruption costs are low. It is expected that the proposed algorithm can be used as the countermeasure for the emergency state of the electric power dispatch in a operation point of view.

• Tribology and Lubricants
• /
• v.19 no.6
• /
• pp.335-341
• /
• 2003

Recently, the automotive industry is being developed rapidly. On this, a demand of high quality performance­test­machine is increased too. But it is progressive technology that must be combined hydraulic, mechanic and electronic technologies. To construct this system, the design of oil hydraulic circuit, interface skill between sensor and personal computer, data acquisition & display system and integrated control are very important skill. Moreover, reliable data is obtained with vacuum system and complex heat exchange system. Therefore, in this study, we designed a performance­test­machine by using above key technologies and we also made a integrated PC control system using personal computer which is more progressive and flexible method than PLC control.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.6
• /
• pp.516-522
• /
• 2012

Recently trends of home appliance has been changed in house and the demand for functional refrigerator has been increased. Power consumption of refrigerator accounts for a large proportion in consumer electronics. Also, compressor accounts for most of the power consumption in refrigerator parts. Therefore, this paper proposes a multi-refrigerator system with single compressor & condenser fan in order to reduce energy. To verify the availability of the proposed multi refrigerant system, integration experiment is carried out.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.642-644
• /
• 2004

DLC(Direct Load Control) program has been introduced and operated for the stabilization of power demand. DLC program takes effect in accordance with political judgment of government (operating reserve ratio etc), which is controlled by DLC system mechanism. So we would improve understanding of DLC program participant introducing about control procedure in detail and also propose direction of development about control system.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.292-294
• /
• 2002

Load management programs was initiated in the 1970s to actively influence customer load in the United States. Generally, load management programs can be categorized into direct load control(DLC), indirect load control(IDLC), and energy storge system(ESS). The DLC allows the utilities to shed remote customer demand unilaterally Direct load control(DLC) has lately attracted considerable attention. This paper suggests efficient promoting plans of DLC, which has a lot of advantages. The importance of DLC will be increased more and more. Therefore, various studies of DLC activation plans have to be continued.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.174.2-174
• /
• 2001

Increasing demand for safety features, driving comfort and operational convenience in automobiles requires an intensive use of electronic components such as sensors, actuators and Electronic Control Unit(ECU)'s. These growing number of electronics has given rise to problems concerning the increasing number, size and weight of the wiring harnesses. In order to resolve these problems, multiplexed wiring systems such as Controller Area Network(CAN) serial communication protocol are applied in vehicle. This paper introduces the development of Body Control Module(BCM)s using multiplexed wiring systems. The BCM's were developed and implemented using CAN, the most popular choice of in-vehicle communication protocols.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.7
• /
• pp.1055-1063
• /
• 2004

In this study, we developed an automatic veneer sorting system controlled by nonlinear friction and nonlinear stiffness. With these nonlinear characteristics, it was difficult to analysis and to control the system in the fast. However it is necessary to consider nonlinear characteristics to satisfy accurate and rapid control demand in these days. We used not only nonlinear friction but also nonlinear stiffness and combined both to control the system. An experimental device was designed with 4 AC servo-motors and 2 Sensors. Through a series of experiment, we found nonlinear friction characteristics among roller versus veneer and veneer versus veneer and nonlinear stiffness characteristics with stacked veneers. Finally, we showed that the proposed control algorithm was very effective for veneer sorting system with nonlinear friction and stiffness.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.165-168
• /
• 1999

The support or automation of various kinds of intelligent work is urged at large, integrated control centers. Given this demand, a decision making system for wash timing of polluted insulators, applying the Bayesian rule theory, has been developed in order to support maintenance work in the power system. The results of this system application revealed that exact wash timing of the insulators could be determined automatically, equivalent in precision to judgement by skilled operators, thus contributing to further work efficiency.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.969-974
• /
• 2010

In this paper, we propose a fault-tolerant controller for compensating measurement noise of feedback sensor. Because control systems operate via feedback sensor's signal, the measurement noise in sensor's signal results in performance degradation or even system failure. Therefore, control systems often demand on compensating measurement noise. Our controller is equipped with a compensator in order to reject or reduce the effect of measurement noise in feedback information. Our proposed method is verified via simulation and experiment for a Ball and Beam system.