• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.185-189
• /
• 2001

This paper presents a precision voltage control technique of a single phase PWM inverter for a constant voltage and constant frequency(CVCF) applications. The proposed control employes a PLL compensating loop which minimize the steady state error and phase delay. The computer simulation and experiment are carried out for the actual single phase PWM inverter and the results well demonstrate the effectiveness of the proposed control.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.3
• /
• pp.136-141
• /
• 2007

In this paper, a new simple control method for active power filter which can realized the complete compensation of the harmonic currents is proposed. In the proposed scheme, a compensating current reference generator employing resonance model implemented by a DSP(Digital Signal Processor) is introduced. Deadbeat control is employed to control the active power filter. The switching pulse width based SVM(Space Vector Modulation) is adopted so that the current of active power filter is been exactly equal to its reference at the next sampling instant. To compensate the computation delay of digital controller, the prediction of current is achieved by the current observer with deadbeat response.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.689-698
• /
• 2008

The performance of a TCP protocol on MANETs has been studied in a numerous researches. One of the significant reasons of TCP performance degradation on MANETs is inability to distinguish between packet losses due to congestion from those caused by nodes mobility and as consequence broken routes. This paper presents the Cluster-Label-based Routing (CLR) protocol that is an attempt to compensate source of TCP problems on MANETs - multi-hop mobile environment. By utilizing Cluster-Label-based mechanism for Backbone, the CLR is able to concentrate on detection and compensation of movement of a destination node. The proposed protocol provides better goodput and delay performance than standardized protocols especially in cases of large network size and/or high mobility rate.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.136-138
• /
• 2006

Recently, network systems are widely used in several areas, and some considerable attentions have been directed to the Networked Control System(NCS). In NCS, network-induced delays are inevitable, and they sometimes degrade the performance of networked control systems to be a source of potential instability. In this paper, We proposes a compensation method for networked control system subject to network-induced delays by using a simple method, which is based on a sort of predictive strategy. To evaluate its feasibility and effectiveness, a real-time NCS for a rotary inverted pendulum is implemented via an Ethernet. Based on the experimental results. we show that the proposed simple method can be a practical and feasible solution to NCS design.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.115-118
• /
• 2004

In this paper, a systematic design approach based on parallel distributed compensation techniques is proposed for anticontrol of chaos in a general continuous-time Takagi-Sugeno (TS) fuzzy system. The verification of chaos in the controlled continuous-time TS fuzzy system is done by the following procedure. First, we establish an asymptotically approximate relationship between a continuous-time TS fuzzy system with time-delay and a discrete-time TS fuzzy system. Then Marotto theorem is applied. The boundedness in the controlled continuous-time TS fuzzy system is also proven via its associated discrete-time TS fuzzy system.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.274-277
• /
• 1999

The paper describes a implementation of space vector pulse-width modulation (SVPWM) voltage source inverter using Field Programmable Gate Array(FPGA) for a induction motor control system. The implemented chip is included logic circuits for SVPWM, dead time compensation and speed detection using Quick Logic, QL16X24B. The maximum operating frequency and delay time can be set to 110MHz and 6 nsec. The designed FPGA for SVPWM can be incorporated with a digital signal processing to provide a simple and effective solution for high performance voltage source inverter drives. Simulation and Implementation results are shown to verify the usefulness of FPGA as a Application Specific Integrated Circuit(ASIC) in power electronics applications

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.350-353
• /
• 1999

In this paper, a new simple control method for active power filter which can realized the complete compensation of the harmonic currents is proposed. In the proposed scheme, a compensating current reference generator employing lossless resonato implemented by a DSP(Digital Signal Processor) is introduced. Deadbeat control is employed to contro the active power filter. The switching pulse width based SVM(Space Vector Modulation) is adopted so that the current of active power filter is been exactly equal to its reference at the next sampling instant. To compensate the computation delay of digital controller, the prediction of current is achieved by the current observer with deadbeat response.

• Advances in Computational Design
• /
• v.5 no.3
• /
• pp.233-260
• /
• 2020

The main purpose to introduce model based controller in proposed control technique is to provide better and fast learning of the floating dynamics by means of fuzzy logic controller and also cancelling effect of nonlinear terms of the system. An iterative adaptive dynamic programming algorithm is proposed to deal with the optimal trajectory-tracking control problems for autonomous underwater vehicle (AUV). The optimal tracking control problem is converted into an optimal regulation problem by system transformation. Then the optimal regulation problem is solved by the policy iteration adaptive dynamic programming algorithm. Finally, simulation example is given to show the performance of the iterative adaptive dynamic programming algorithm.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.149-152
• /
• 1999

This paper addresses major issues in localising sound sources in space using the experimental data set of head-related responses in the time or frequency domain. They come from the technical realisation steps for implementing the convolution of HRIR's with sound sources, the cross-talk cancellation for transaural filtering, the matched time delay compensation, etc. in real, those technical matters seem to be minor because they can be realised in off-line signal processing schemes. This paper puts much emphasis on what we misunderstood about the sets of HRTF's or HRIR's, More specifcaily, the sets of HRTF's or HRIR's of course supply relevant information to sound localisation but include much useless 'rubbish' that have made for us to fail to put spatial image into real souno signals such as voices and music's. This paper proposes possible reasons for such failure and, furthermore, introduces detained subjects that should be challenged so as to resolve them.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.798-803
• /
• 2007

In case of minimized digital camera and mobile digital camera, it's difficult to get the high quality image by conventional AE(Auto Exposure) algorithm because of restriction of system organization. In this paper, a new algorithm that adopts a target setting, a compensation of feedback delay and a gamma correction, etc, are suggested for improving a noise increase and an output sensitivity decrease due to system minimization. We also suggest a method using fuzzy logic which can decide more effectively the ES(Electric Shutter) value and the AGC(Analog Gain Control) value than conventional system.