• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.11
• /
• pp.1124-1129
• /
• 2008

Recently, two-port time-domain passivity approach was modified for time-varying communication delay. The newly proposed approach could achieve stable teleoperation even under the serious time-varying delay and packet loss communication condition. However, after some operation hour, the accumulated energy difference between the input energy from one port and the output energy at the other port caused unstable behavior until the passivity controller is activated. Resetting scheme is introduced for solving this problem, and stable bilateral teleoperation can be guaranteed without worrying about the accumulated energy difference.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.1
• /
• pp.121-127
• /
• 2015

This paper considers the problem of sampled-data control for continuous linear parameter varying (LPV) systems. It is assumed that the sampling periods are arbitrarily varying but bounded. Based on the input delay approach, the sampled-data control LPV system is transformed into a continuous time-delay LPV system. Some less conservative stabilization results represented by LMI (Linear Matrix Inequality) are obtained by using the Lyapunov-Krasovskii functional method and the reciprocally combination approach. The proposed method for the designed gain matrix should guarantee asymptotic stability and a specified level of performance on the closed-loop hybrid system. Numerical examples are presented to demonstrate the effectiveness and the improvement of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.116.1-116
• /
• 2002

When the teleoperated system has a signal transmission time delay between slave and control system , the system stability as well as the position tracking and the force reflecting performances are likely to be deteriorated. This paper proposed a bilateral control scheme and a controller design method for the teleoperated control systems with a signal transmission time delay. The proposed controller is a modified type of smith predictor for the time delay in each input and output stage of an open loop unstable plant. The proposed controller not only satisfies the system internal stability but also improves the position tracking performance with disturbance rejection capability. The simulation...

• International Journal of Control, Automation, and Systems
• /
• v.1 no.4
• /
• pp.503-510
• /
• 2003

This paper describes the synthesis of robust and non-fragile $H^{i~}$state feedback controllers for linear varying systems with time delay and affine parameter uncertainties, as well as static state feedback controller with structural uncertainty. The sufficient condition of controller existence, the design method of robust and non-fragile $H^{i~}$static state feedback controller, and the region of controllers satisfying non-fragility are presented. Also, using some change of variables and Schur complements, the obtained conditions can be rewritten as parameterized Linear Matrix Inequalities (PLMIs), that is, LMIs whose coefficients are functions of a parameter confined to a compact set. We show that the resulting controller guarantees the asymptotic stability and disturbance attenuation of the closed loop system in spite of time delay and controller gain variations within a resulted polytopic region.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.629-644
• /
• 2014

The goal of this paper is to consider a co-design approach between time delay compensation and the message scheduling for CAN-Based Networked Control Systems (NCS). First we propose a hybrid priority scheme for the message scheduling in order to improve the Quality of Service (QoS). Second we present the way to calculate the closed-loop communication time delay and then compensate this time delay using the pole placement design method in order to improve the Quality of Control (QoC). The final objective is the implementation of a co-design which is the combination of the compensation for communication time delays and the message scheduling in order to have a more efficient NCS design.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.6
• /
• pp.581-588
• /
• 2007

In this paper, we propose a delayed feedback guaranteed cost controller design method for linear time-delay systems with norm-bounded parameter uncertainties and nonlinear perturbations. A quadratic cost function is considered as the performance measure for the given system. Based on the Lyapunov method, an LMI optimization problem is formulated to design a controller such that the closed-loop cost function value is not more than a specified upper bound for all admissible system uncertainties and nonlinear perturbations. Numerical example show the effectiveness of the proposed method.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3057-3059
• /
• 1999

The inverted pendulum is an unstable, nonlinear system exposed to disturbances and its system parameters change. This paper presents the Time Delay Control design of the inverted pendulum using robot minipulator. The results obtained from a simulations indicated a reference tracking of the system. This paper will implement, the time delay control of the inverted pendulum using a robot manipulator, It will be that the time delay can control the inverted pendulum using a manipulator.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.149-156
• /
• 2011

Transmission delay and packet loss induced by a communication network can degrade the control performance and, even make the system unstable. This paper presents a method for compensating transmission delay and packet loss in a networked control system for unmanned underwater vehicle. The proposed method is based on Lagrange interpolation in order to satisfy the requirements of simplicity and model-independency. In this work, the lost/delayed data are estimated in real time by only using the past data without requiring any mathematical model of the controlled system. Consequently, the proposed method can be implemented independent of the controlled system, and also it can achieve fast and accurate compensation performance. The performance of the proposed technique is evaluated by numerical simulations with an unmanned underwater vehicle.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_2
• /
• pp.193-198
• /
• 2022

In this paper, we introduce the improved control method are communicated between a master and a slave robot in the teleoperation systems. When the master and slave robots are located in different places, time delay is unavoidable under the network environment and it is well known that the system can become unstable when even a small time delay exists in the communication channel. The time delay may cause instability in teleoperation systems especially if those systems include haptic feedback. This paper presents a control scheme based on the estimator with virtual master model in teleoperation systems over the network. As the behavior of virtual model is tracking the one of master model, the operator can control real master robot by manipulating the virtual robot. And LQG/LTR scheme was adopted for the compensation of un-modeled dynamics. The approach is based on virtual master model, which has been implemented on a robot over the network. Its performance is verified by the computer simulation and the experiment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.12
• /
• pp.54-60
• /
• 2005

In this paper, fault tolerant control for aircraft is being discussed. The authors propose a fault tolerant control algorithm based on time delay control. Time delay control is an effective method to deal with unknown dynamics. The proposed algorithm has no parameter to be updated and needs no prior information of faults. These are the primary advantages of the proposed method. The algorithm uses output feedback. The design and the stability condition are presented by following the existing proof. The proposed algorithms are verified by simulation examples.