• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.168-171
• /
• 2003

IEEE 802.16 Wireless MAN standard specifies the air interface of fixed point-to-multipoint broadband wireless access systems providing multiple services. Among the service classes supported by the wireless MAN, the best effort service class is ranked on the lowest position in priority and is assisted by a MAC scheme based on reservation ALOHL Such MAC scheme must include a number of components, while many of them are not specified in the standard. In this paper, we thus reveal main components of a MAC scheme supporting the best effort service and present candidate schemes implementing such components. Combining schemes for implementing components, we then construct distinctive MAC schemes supporting best effort service. In designing a MAC scheme, the delay performance induced by the scheme should be considered since scarce resource may be available for the best effort service after the preemptive resource occupation by other service classes. In this paper, we focus on the delay fairness among the subscriber stations using the best effort service. For evaluating a MAC scheme in delay fairness, we present two definitions of delay fairness and provide a criterion for optimal MAC scheme according to each definition of delay fairness. Using a simulation method we investigate the mean delay performance exhibited by each MAC scheme arid find an optimal scheme in delay fairness. From numerical examples, we observe that SR/ED/PG＋P scheme has strong delay fairness compared with MR/ED/PG＋P and SR/ED/PG＋D schemes according to a definition of delay fairness. However, other schemes are rather shown to have better delay fairness when the other definition is adopted.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.946-949
• /
• 2012

We present the optimization of a birefringence-enhanced-waveguide (BWG)-based polarization beam splitter (PBS) in a Mach-Zehnder interferometer (MZI) configuration and analyze the structure-dependent or polarization-dependent phase difference, using a delay-line MZI (DL-MZI). We fabricate the DL-MZI using silica-based planar lightwave circuit technology and, using the DL-MZI, demonstrate the ability to optimize a PBS by measuring the birefringence of the BWG and structure-dependent phase offset.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1512-1515
• /
• 1987

The buffer circuit having minimum delay time is designed and analyzed in this paper. Considering the parasitic components of the MOS transistor, the optimal transistor size ratio between the individual buffer stages is presented. This paper's result is better than that of the Mead and Conway's analysis [1] with respect to both delay time and total area that buffer occupies.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.1
• /
• pp.12-17
• /
• 2013

Fault currents are expressed as a combination of harmonic components and exponentially decaying DC offset components, during the occurrence of fault in power system. The DC offset components are included, when the voltage phase angle of fault inception is closer to $0^{\circ}$ or $180^{\circ}$. The digital protection relay should be detected quickly and accurately during the faults, despite of the distortions of relaying signal by these components. It is very important to implement the robust protection algorithm, that is not affected by DC offset and harmonic components, because most relaying algorithms extract the fundamental frequency component from distorted relaying signal. So, In order to high performance in relaying, advanced DC offset removal filter is required. In this paper, a new DC offset removal filter, which is no need to preset a time constant of power system and accurately estimate the DC offset components with one cycle of data, is proposed, and compared with the other filter. In order to verify performance of the filter, we used collecting the current signals after synchronous machine modeling by ATPDraw5.7p4 software. The results of simulation, the proposed DC offset removal filter do not need any prior information, the phase delay and gain error were not occurred.

• Journal of Broadcast Engineering
• /
• v.16 no.4
• /
• pp.624-634
• /
• 2011

Recently, the JCT-VC is developing the next generation video coding standard that is called HEVC. HEVC has adopted many coding technologies increasing coding efficiency. For chroma interpolation, DCT-based interpolation filter showing better performance than the linear filter in H.264/AVC was adopted in HEVC. In this paper, a combined filter that utilizes the FIR filter and the linear filter in H.264/AVC is proposed to increase coding efficiency. When the proposed method is compared with DCT-based interpolation filter, the experimental results for various sequences show that the average BD-rate improvements on chroma U and V components are 0.9% and 1.1%, respectively, in the high efficiency case of random access structure, those on U and V components are 1.1% and 1.1%, respectively, in the low complexity case of random access structure, those on U and V components are 0.9% and 1.4%, respectively, in the high efficiency case of low delay structure, and those on U and V components are 1.8% and 1.8%, respectively, in the low complexity case of low delay structure.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.57-60
• /
• 2003

IEEE 802.16 Wireless MAN standard specifies the air interface of fixed point-to-multipoint broadband wireless access systems providing multiple service. Among the service classes supported by the wireless MAN, the BE class is ranked on the lowest position in priority and is usually deployed by multicast and broadcast polling MAC scheme. In provisioning such BE service, the delay performance is influenced by a number of components including restrictions on resource request per SS, the number of request opportunities in upward frame, scheduling requests at BS, and contention resolution method. As candidate components of MAC function for BE service, we propose single and multiple request schemes (for controling the number of requests per SS), exhaustive and limited request schemes (for regulating the amount of grant per request) and FCFS, H-SMF, pure SMF, SS-wise Round Robin, and pure Round Robin (for scheduling requests at BS). Then, we construct MAC schemes by combining the above components and evaluate the delay performance exhibited by each MAC scheme using a simulation method. From numerical results, we investigate the effect of MAC components on average delay and delay variation and observe the dissonance on collision reduction in a resource - limited environment.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.1
• /
• pp.9-17
• /
• 2011

Project delay is one of the most crucial impact factors in the construction process from a schedule and cost management perspective. This study focused on analyzing the causes of concrete frame work delay in the apartment construction project. According to the analysis of project cost composition, the direct cost of concrete works was highest in most samples. Actual delays of concrete works were analyzed for the six different construction components. Causes of delay were grouped into two categories; preconstruction and construction phases and these two groups were further divided into sub-groups. Analysis results revealed that the most significant delay was occurred in the 1st. floor concrete skeleton work. For each delay factor, implications of delay as well as suggestion(s) for reducing the possibility of schedule delay are provided.

• Smart Structures and Systems
• /
• v.4 no.6
• /
• pp.809-828
• /
• 2008

Real-time hybrid testing is an attractive method to evaluate the response of structures under earthquake loads. The method is a variation of the pseudodynamic testing technique in which the experiment is executed in real time, thus allowing investigation of structural systems with time-dependent components. Real-time hybrid testing is challenging because it requires performance of all calculations, application of displacements, and acquisition of measured forces, within a very small increment of time. Furthermore, unless appropriate compensation for time delays and actuator time lag is implemented, stability problems are likely to occur during the experiment. This paper presents an approach for real-time hybrid testing in which time delay/lag compensation is implemented using model-based response prediction. The efficacy of the proposed strategy is verified by conducting substructure real-time hybrid testing of a steel frame under earthquake loads. For the initial set of experiments, a specimen with linear-elastic behavior is used. Experimental results agree well with the analytical solution and show that the proposed approach and testing system are capable of achieving a time-scale expansion factor of one (i.e., real time). Additionally, the proposed method allows accurate testing of structures with larger frequencies than when using conventional time delay compensation methods, thus extending the capabilities of the real-time hybrid testing technique. The method is then used to test a structure with a rate-dependent energy dissipation device, a magnetorheological damper. Results show good agreement with the predicted responses, demonstrating the effectiveness of the method to test rate-dependent components.

• Journal of electromagnetic engineering and science
• /
• v.3 no.2
• /
• pp.140-146
• /
• 2003

In this paper, the design of a channel filter and its group-delay-and-amplitude equalizer is carried out for the Ka-band satellite transponder subsystem. The 8th order dual-mode filter is employed for high selectivity around the band-edges with an elliptic-integral function response and has an in-line configuration. The 2-pole, reflection-type, group-delay equalizer is designed and manufactured to reduce the group-delay and amplitude variation, which can be large for such a high order filter. It is noted that in both the filter and equalizer, adopting the dual-mode coupling mechanism leads to less mass and volume. Through measurement, the performance of the realized group-delay-equalized filter is shown to meet the equipment requirements and to be appropriate for the satellite input multiplexer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.765-768
• /
• 2008

To make 3D camera system, we check the possibility of advanced range camera module based on measuring the time delay of modulated infrared light, using a single detector chip fabricated on standard CMOS process. To depth information, electronic shutter and interlaced scanning method of 2D sensor is needed. Especially, we design "lens system, illumination unit" and review simulation result.