• Membrane Journal
• /
• v.5 no.2
• /
• pp.74-80
• /
• 1995

Asymmetric poly(vinyl alcohol) (PVA) membranes were prepared by varying the precipitation conditions of the phase inversion technique, and the influences of precipitation conditions on the water uptake of the membrane were investigate. The degree of water uptake of the membrane increased and reached a certain maximum value, as the precipitation time increased. However, it decreded after that. As the precipition temperauure became lower, the degree of water uptake increased more or less. The addition of a nonionic surfactant to the precipitaon solution was effective reducing the precipitation time by lowering the surface tension of the precipitation solution, but ig didn't change the maximum value of its own degree of water uptake. In addition, the relationship between the degree of water uptake and the separation characteristics and mechanical properies of the membrane were investigated. The selectivity factor of the membrane for pervaperation separation decreased, but the permeate flux increased, respectively, with increasing the degree of water uptake. The tensile strength and elongation of the membrane, respectively, increased to a maximum value with increasing the degree of water uptake, and then decreased abtuptly.

• Korean Journal of Weed Science
• /
• v.9 no.3
• /
• pp.221-229
• /
• 1989

This study is conducted to evaluate the effect of KIM-112 (Ca-3, 5-diode-4-propyonly-cyclohexane-1-carboxylate) application at 13, 8 and 3 days before heading for the possibility of lodging prevention, growing pattern of several organisms, growth and yield in paddy rice. KIM-112 was the most effective in reducing elongation of the third internode when it was applied at 13 days before heading(13DBH) and the second internode when it was applied at 8DBH and 3. KIM-112 gradually inhibited internode elongation of rice with increase in dosage starting from 1.0ga.i./10a. The culm length shortened by 7-17% at 3DBH. The maximum distribution of leaf blade at canopy structure was positioned higher on KIM-112 application than on untreated. Lodging index decreased by 8-47% on KIM-112 application and field lodging degree(0-5) was 5 at untreated but KIM-112 application was only 1.3-2.0 of 3 DBH and was little lodging of 8-13 DBH. Ripened grain ratio of KIM-112 application were higher than those of untreated. Yield increased by 27-37% at KIM-112 application.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.207-207
• /
• 2017

The proso millet is vulnerable to lodging due to high plant height and shallow root. A lodging results in a hard mechanical harvesting and yield loss. One of solutions on this problem is inhibition of internode elongation. The objective of this study was to set up use time and dose of prohexadium-calcium, is growth inhibitor. The experimental variety was Ibaekchal. The experiment design was a split-plot design with three replications. The treatments were as follow: Main-plots were 25 and 35 day after sowing(DAS) as use time and sub-plots were 0%, 50%, 100%(diluted solution of 1000 times, $1000{\ell}\;ha^{-1}$), 150% as dose. The amount of nitrogen, phosphate and potassium fertilization were 90, 70, $80kg\;ha^{-1}$, respectively. The size of high ridge and plant spacing were $90{\times}30cm$ and $60{\times}15cm$, respectively. Proso millet was sown on June 9, 2016 by hands and was adjusted at 2 plant per hill. The growth survey of vegetative growth stage was conducted at 1 day before treatment and with one week interval after treatment. Data were collected: (1) grain yield: weight of grain in $kg\;ha^{-1}$, (2) 1000 grain weight: average weight of 1000 grain, (3) plant height: distance from soil to top of panicle or leaf in cm, (4) ear length: distance from top of stem to top of ear in cm, (5) stem diameter: diameter of second internode (6) degree of lodging: percentage of lodging area, etc. Analyses of variance were performed using R version 3.3.1(https://www. r- project. org). The Duncan's multiple range test(DMR) was used to separate treatment means at P < 0.05. There was a significant difference in plant height and number of stem among the use time and dose of prohexadium-calcium during vegetative growth stage. At 25 DAS, the difference with no treatment increased until 25 day after treatment and decreased since then. The difference in number of stem increased until 18 day and decreased since 25 day. At 35 DAS, the difference with no treatment in plant height and number of stem increased until 22 day after treatment and decreased since then. We assumed that the effect of prohexadium-calcium was inhibition of internode elongation and promotion of tillering, continued untel 25day after treatment. At 25 DAS, the degree of lodging deceased to 100%, 30%, 10% and 0% as dose increased. At 35 DAS, the degree of lodging decreased to 100%, 20%, 0% and 0% as dose increased. At 25 DAS, the yield was 2910, 2710, 3190, $2310kg\;ha^{-1}$ among dose. At 35 DAS, the yield was 2750, 2630, 2220, $2050kg\;ha^{-1}$. We recommend that the optimum use time and dose of prohexadium-calcium for proso millet is 1000 times diluted solution of $1000{\ell}$ per ha at 25 day after sowing.

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.781-789
• /
• 2021

To enhance the design and comfort of waist-protection corsets, this study analyzed the product characteristics of five types of posture-correction corsets that are available commercially. Additionally, subjective evaluation of the corsets was conducted on women aged 20 to 60 years, in terms of design, material preference, fit, comfort, degree of correction, freedom of movement, tightness, and convenience of front fastening. Following product analysis, the five corset types were divided into: two soft, one semi-hard, and two hard types in terms of the degree of elongation. As a result of pattern analysis, the soft type was designed to improve fit by reflecting the body curvature, whereas the semi-hard and hard types were relatively flat. Through the wearing sensation assessment, the hard type manufactured by company S was the best in terms of design, material, fit, comfort, correction degree, and freedom of movement. The soft type was average in design, material, and fit while relatively poor in the correction degree and tightness. The results indicated that soft materials, flexible bones with appropriate tension, patterns designed to snugly fit the body with large curvature at the top and bottom for better inflection, and adjustable support belts that can be double-fixed are crucial elements in improving the corset design to boost the comfort of wearing. These study results are helpful in the development of waist-protection corsets with excellent wearing comfort and design appreciated by customers.

• Proceedings of the KOSOMBE Conference
• /
• v.1989 no.05
• /
• pp.7-8
• /
• 1989

The graft copolymer of chitosan with amino acid, L-lysine was synthesized by heterogeneous copolymerization and was evaluated as an artificial skin. The mechanical properties under dry and wet state, water content, water vapor transmittance rate and biodegradability were measured. The tensile strength and elongation under wet state ranged $0.3-0.5\;kg/mm^2$, 10-13%, respectively. Water vapor transmittance rate ranged $450-500\;g/m^2{\cdot}day$ like that of the normal skin. The weight loss of prepared membrane by protease IV was measured for the degree of biodegradation. The degree of biodegradation was around 15% and after 4 days it was slow. Biocompatibility was evaluated by studying the attachment of human fibroblast on the prepared membrane surface.

• Journal of Fashion Business
• /
• v.10 no.1
• /
• pp.94-105
• /
• 2006

Hair bleaching is a treatment process in which the melanic pigment is oxidized by hydrogen peroxide. With the increase of the number of treatments, $1{\sim}10$ levels of various colors develop, the hair luster diminishes, and the appearance becomes very rough. In this study, by changing the number of hair bleaching and bleaching conditions, the changes in the degree of hair damage and its process were observed through the use of scanning electron microscopy. The color changes were also compared through the use of spectrophotometer. In order to study the physical changes of the bleached hairs and to search for the optimum conditions to keep the hair damages minimum during bleaching, tensile properties were measured and reviewed. By increasing the number of hair bleaching and by the severe conditions, the scales became eroded and the protection layers were decreased, and the oxidation reached the inner sectors resulting in rough surface and fibrillation. The surface of the hairs became bright yellowish and transparent by the bleaching of melanic pigments or by the destruction of pigments. With the increase of bleaching degree, in terms of physical changes, the breaking strength decreased while the elongation increased a little.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.28 no.4
• /
• pp.165-170
• /
• 2024

This study investigated the impact of soil-structure interaction on multi-degree-of-freedom structures using the shallow-foundation Winkler model, known as the BNWF model. The model's period was determined through eigenvalue analysis and compared to results obtained from FEMA's formula. Results indicated that considering the soil, the structure's period increased by up to 8.7% compared to the fixed-base model, aligning with FEMA's calculations. Furthermore, with adequate ground acceleration, roof displacement increased by 3.4% to 3.8%, while base shear decreased by 4% to 10%. However, roof displacement and base shear increased in some earthquake scenarios due to spectral shape effects in regions with extended structural periods. Foundation damping effects, determined through the foundation's moment-rotation history, grew with higher ground acceleration. This suggests that accounting for period elongation and foundation damping can enhance the seismic design of multi-degree-of-freedom structures.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.101.1-101.1
• /
• 2012

Interplanetary dust particles are observable as zodiacal light, which is the sunlight scattered by the interplanetary dust particles. The origins of interplanetary dust particles are still in question because they are eroded by Poynting-Robertson photon drag and mutual collisions among dust particles. The small-scale structures in the zodiacal light provided a clue to specify their origins. Asteroidal debris were detected as band-like structures (dust bands), and the cometary large particles were detected as narrow trails (dust trails). However, little is confirmative about their detailed origins and mineralogical compositions because of the lack of observational data particularly in the optical wavelength. We made a high-resolution optical zodiacal light map based on the CCD observations at Mauna Kea, Hawaii. We analyzed data taken on November 12, 2004. After the data reduction, such as flat fielding and subtraction of airglow emissions, we succeeded in the construction of the zodiacal light map with the spatial resolution of 3' in the solar elongation between 45 degree and 180 degree. This is the highest resolution map in the visible wavelength so far. In this map, we confirmed the dust bands structures near the ecliptic plane. We will discuss about the similarities and the differences between optical and infrared dust bands.

• Food Science and Biotechnology
• /
• v.15 no.6
• /
• pp.925-930
• /
• 2006

Chitosan-based nanocomposite films were prepared using a solution intercalation method incorporating varying amounts of organically modified montmorillonite (Cloisite 30B) from 0 to 30 wt%. The nanocomposite films prepared were optically clear despite a slight decrease in the transmittance due to the spatial distribution of nanoclay. X-ray diffraction patterns indicated that a certain degree of intercalation or exfoliation formed when the amount of clay in the film was low and that microscale tactoids formed when the clay content in the sample was high (more than 10 wt%). The tensile strength (TS) of the chitosan film increased when the clay was incorporated up to 10 wt% and then decreased with further increases in the clay content of the film. The elongation at break (E) increased slightly upon the addition of low levels of clay up to 5 wt% and then decreased with further increases in the amount of the clay in the film. The water vapor permeability (WVP) decreased exponentially with increasing clay content. The water solubility (WS) and swelling ratio (SR) of the nanocomposite films decreased slightly, indicating that the water resistance of the chitosan film increased due to the incorporation of the nanoclay.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1182-1189
• /
• 2010

The mechanical behavior of a granular material is governed by the applying effective stresses and its skeletal structure which is considered to be the packing of particles giving overall density and degree of anisotropic. Factors that affect soil packing are the particle size, size distribution and shape, and the arrangement of grain contact. Soil particle size and shape are the most important factor, but difficult to quantify. In this study, 2D Fourier analysis is applied to quantify the shape of granular particles. Jumunjin sand was used in the experiment and particle images are captured using an optical microscope. The results showed that three lower order Fourier descriptor are closely related with roundness, sphericity of the granular particle. Also statistical approach is used to determine roundness, form factor, elongation ratio, roughness of Jumunjin sand.