• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1833-1836
• /
• 2008

Recently as the micro surface features become higher and diverse in their shapes, the releasing of the molded features becomes more crucial for manufacturing of the micro patterned products. The higher aspect ratio of the features or more complex shape of the features results in larger releasing force, elongation or cohesive failure of the features during the releasing. Another issue would be the uniformity of the released surface features after molding, especially for applications with large area surface. The micro patterned optical film, one of typical applications for micro surface features, consists of two layers, the thermoplastic base film and the micro formed UV resin layer. Therefore two interfaces are typically involved during the forming of this micro featured film; one is between the base film and the UV resin and another is between the resin and the pattern master. To improve the releasing of the molded surface features, the adhesive characteristic was investigated at these two interfaces. A PET film was used as a base film and two UV curable resins with different surface energy were prepared for different adhesiveness. Also the two different pattern masters were employed; one is made from brass-copper alloy and fabricated with PMMA. The adhesiveness at each interface was measured for some combinations of these base film, UV resins and the masters and the effect of this adhesiveness on the releasing was investigated.

• Elastomers and Composites
• /
• v.6 no.1
• /
• pp.71-81
• /
• 1971

The intention of this study is to investigate the properties of polymer blend, NBR/PVC vulcanizates and blending procedures such as roll-mixing temperatures and sequences for polymer blending of NBR and PVC(resin type). The results obtained are as follows: 1. The roll temperature applied for polymer blending is around $150^{\circ}C$. At this temperature region, the degradation of rubber stock, which may be caused by heat, can be minimized and mill processing in practical application in industries can also be facilitated. 2. It is obviously necessary that a small amount of plasticizers should be added to the stock for improving processibility of roll mixing and physical properties. 3. On roll-mixing sequence, it is more effective that PVC compounded with plasticizer is added to NBR milled on hot roll. 4. The vulcanizates of the blends with different degree of polymerization of PVC ale similar to one another in properties. 5. NBR/PVC(70/30) blends shows the better physical characters than eve,-made foreign latex blend except abrasion-resistance. 6. As PVC addition ratio is increased, the physical properties such as resistance to ozone, tear, heat and oil and tensile strength, modulus, hardness have also improved, on the other hand, tension set and rebound character decreased. 7. The curve of ultimate elongation have point of inflection at the ratio of $30\sim40$ part of PVC. 8. While CR is blended, the physical properties such as brittle point, rebound and resistance to oil in high temperature have improved. 9. Polymer blend of NBR and domestic PVC is applied for the industrial utility such as rubber sole and heel, electric wire cover and oil-resistant packing, coating and gasket, printing roll, film for food packing etc.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.7
• /
• pp.862-871
• /
• 2003

Kenaf has been estimated as an economic and environmentally compatible crop. This study purposed to enlarge the use of kenaf as textile materials and to develope high value-added textile fibers. Kenaf has been cultivated successfully and grown fast in Jeju. The height of kenaf stalks was about 220cm at 105 DAP and 400cm at 150 DAP, After harvesting at 105 DAP and seperating the basts from harvested kenaf stalks, decorticated kenaf basts were rotted in water at 15~$25^{\circ}C$ for biological rotting and were treated with 1%, 4% and 7% NaOH at 9$0^{\circ}C$ for chemical retting. The properties of extracted fibers were compared: such as fiber diameter. Transversal and longitudinal views, colors, crystallinities, strengths and elongations etc. The diameter of kenaf bast fibers was 15~25 ${\mu}{\textrm}{m}$. Biologically rotted kenaf bast fibers had well developed lumens which were diminished after chemical retting. The degree of crystallinities of biologically rotted kenaf bast fiber was about 92~96% showed higher than those of chemically rotting. The biologically rotted fibers were bright and had creamy color. Yelloweness increased at chemically rotted fibers. Fiber bundle strengths were from maximum 98076.9 (gf/g) to minimum 63749.5 (gf/g). Fiber bundle strengths of biologically rotted kenaf fibers appeared greater than those of chemically rotted fibers. Alkali treatments of chemical rotting could make strength lower and elongation higher. Rotting method might be one of the most importance factors affecting to final fiber properties.

• Elastomers and Composites
• /
• v.35 no.3
• /
• pp.173-179
• /
• 2000

Cure characteristics. tensile properties, and dynamic properties were investigated on the carbon black-filled natural rubber compounds, in which three typical vulcanization types conventional vulcanization(Conv), semi-efficient(Semi-EV), and efficient(EV) vulcanizations were used. The effects of vulcanization temperature on both the mechanical property and aging resistance of rubber compounds were also investigated. The Conv cure system showed a slightly slower rate of vulcanization than those of Semi-EV and EV ones. On the other hand, it showed a higher value in the maximum torque of cure curve. Higher tensile moduli were observed in Conv system than those in Semi-EV and EV ones, while lower elongation at break were obtained in Conv one. The tensile strength at break were found to be about the same for three cute systems. Hardness, modulus, and tensile strength decreased with increasing the vulcanization temperature, and the degree of changes in the properties was found to be smaller for EV and Semi-EV systems than that in Conv one. The EV system was found to be superior in thermal-aging resistance to Conv one.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.3
• /
• pp.252-260
• /
• 1989

This experiment was carried out to clarify the causes of sterility in terms of pollination characteristics for the sterile-type cold damage as influenced by amount of nitrogen application and shading conditions in rice plants. The results obtained are as follows: The number of young microspore per anther was not changed greatly by amount of nitrogen application. The number of ripened pollen grains per anther decreased according to increase in nitrogen application and shading degree, but the anther length and stigma length were not significantly affected by those factors. The number of pollen grains on stigma decreased by intense shading. The fertility decreased with increased nitrogen application and intensified shading. The elongation of auricle distance per day was less in less nitrogen application and intense shading. The internode length of the first and the second from the top were shortened with intense shading, but that of the fourth was elongated. The number of spikelet per panicle decreased with increase in shading intensity.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.455-461
• /
• 2018

The purpose of this study is to evaluate the tensile strength performance of the polyurethane coating material used as the waterproofing material in concrete structures. A linear regression equation is proposed to establish a correlation on the tensile strength of polyurethane coating membrane against periodic exposure to chemical degradation. The polyurethane film membrane showed a minimum strength of 23% to a maximum of 38% when subjected to chemical degradation. The elongation rate showed a relation with the tensile strength deterioration rate of at least 15% to 22% at maximum, and the proposed regression equation could be used to predict the degree of performance change of the polyurethane coating membrane under chemical degradation condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4468-4472
• /
• 2010

SiOC films made by the inductively coupled plasma chemical vapor deposition were researched the relationship between the dielectric constant and the chemical shift. SiOC film obtained by plasma method had the main Si-O-C bond with the molecule vibration mode in the range of $930{\sim}1230\;cm^{-1}$ which consists of C-O and Si-O bonds related to the cross link formation according to the dissociation and recombination. The C-O bond originated from the elongation effect by the neighboring highly electron negative oxygen atoms at terminal C-H bond in Si-$CH_3$ of $1270cm^{-1}$. However, the Si-O bond was formed from the second ionic sites recombined after the dissociation of Si-$CH_3$ of $1270cm^{-1}$. The increase of the Si-O bond induced the redshift as the shift of peak in FTIR spectra because of the increase of right shoulder in main bond. These results mean that SiOC films become more stable and stronger than SiOC film with dominant C-O bond. So it was researched that the roughness was also decreased due to the high degree of amorphous structure at SiOC film with the redshift after annealing.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.5
• /
• pp.197-202
• /
• 2001

The influence of thermal treatment and cold drawing was investigated for poly(ethy1ene terephthalate) films fabricated with various experimental conditions. Samples were elongated at room temperature under stepwise-drawing condition with the cross-head speed kom 0.5 to 500 mrdmin in an universal tester. Stress oscillation was observed in the stress-stnin curve of the samples heat-treatd at 50, 72 and $129^{\circ}C$ for 30 min, but it was not observed in the samples heat-treatd at $83^{\circ}C$ for 30 min. Thermal analyses of the samples were carried out in differential scanning calorimeter at the heating rate df $10^{\circ}C$/min/min, and the glass transition temperature, crystallization peak, enthalpy of fusion and degree of crystallinity were measured. The dynamic mechanical analyses of the samples were also carried out in a multiplefimction internal kiction pendulum at 1 Hz with the heating rate of $1.5^{\circ}C$/min, and it was found that the elastic modulus increases in the order of non-treated, heat-treated, and elongated samples.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7283-7286
• /
• 2014

SiOC films were prepared as insulators for displays by sputtering at low temperatures, and the relationship with the electrical properties waaas examined. The electrical properties of SiOC films were affected by the annealing process, and SiOC films annealed at 100oC showed a significant increase in thickness and a decrease in the reflective index. XRD revealed an increase in the degree of the amorphous structure. Moreover, the capacitance and leakage current of the SiOC films annealed at 100oC decreased. These characteristics of SiOC films highlight their potential as ideal insulators. Amorphous SiOC films by the reduction of polarization are dependent on the elongation effect of the bonding lengths in the structure and the thickness. The properties of these SiOC films are suitable for low temperature displays.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.6
• /
• pp.1063-1067
• /
• 2004

To elucidate the effect of protein films containing an antioxidant on lipid oxidation of fish paste products during storage, zein and soy protein isolate (SPI) films containing green tea extract were prepared and their physical properties were examined. Tensile strength and elongation of the protein films decreased by the addition of green tea extract compared to the control. Due to the addition of green tea extract, SPI film had an increase in yellowness, but zein film had a decreased yellowness. Wrapping of fried fish paste products by the zein and SPI films containing the antioxidant retarded lipid oxidation at 2 day storage by 3.6 mg MDA/kg sample and 3.6 mg MDA/kg sample, respectively, for instant fish paste compared to the control. For processed fish paste, they decreased the degree of lipid oxidation by 1.6 mg MDA/kg sample and 0.6 mg MDA/kg sample, respectively.