• 치과방사선
• /
• 제21권2호
• /
• pp.249-259
• /
• 1991

The purpose of this study was to evaluate the incidence and radiographic features of 677 cases of hypercementosis by means of the analysis of full mouth periapical radiograms in 4,236 persons visited the Department of Oral Radiology, School of Dentistry, Kyung Hee University during January 1984 to December 1989. The obtained results were as follows: 1. The incidence of hypercementosis was revealed to be 8.2% in total examined persons, and there was a higher incidence in females (9.4%) than in males (7.1%). 2. The hypercementosis was most frequently occurred in the 6th decades (29.2%), and the incidence was increased by advancing age until 6th decades. 3. There was a higher incidence in the maxilla (59.5%) than in the mandible (40.5%), and maxillary second premolar (18.5%) was the most frequently involved tooth. The maxillary first premolar (11.7%) was next in order to frequency followed by maxillary canine (10.0%) and mandibular first and second premolars (9.6%). 4. In the etiologic factors, 35.0% were inflammation, 31.2% were elongation, 6.2% were trauma from occlusion, 0.1 % were uneruption, and 27.5% were unknown. 5. In the degree of cementum apposition, 35.3% were Type Ⅰ, 29.5% were Type Ⅱ, and 35.2% were Type Ⅲ. 6. In the status of cementum apposition, 3.2% were mesial side, 8.9% were distal side, and 87.9% were mesial & distal side. 7. In the identification of radiographic density between normal cementum and excessive cementum, 12.7% could be identified, and 87.3% could be unidentified.

• 한국의류산업학회지
• /
• 제20권5호
• /
• pp.600-607
• /
• 2018

Polypropylene fibers, while having many advantages such as light weight, sweat fast drying, water-repellent, drainage, thermal insulation, anti-static property has a drawback in dyeing. In recent years, the development of dyeable polypropylene fibers has expanded its value in the textile market. The purpose of this study is to fabricate composite spun yarns using polypropylene, acrylic, rayon and wool and to analyze tensile properties, uniformity characteristics, bending properties, hairiness, and surface shape according to the degree of fineness and blended ratio. The specimens consisted of 100% polypropylene spun yarn pp30, pp40 and ppa(pp/acrylic), ppr(pp/rayon), ppw(pp/wool), 5 altogether sed in this study. The results of the study are as follows. The breaking strength of polypropylene spun yarn blended with rayon and acrylic was higher than that of 100% polypropylene spun yarn. The polypropylene spun yarn is higher the fineness been shown to decrease the breaking strength and elongation. The bending properties of polypropylene spun yarns were in the order of ppa>ppr>pp40>pp30>ppw. The unevenness of ppw, ppr, and ppa was higher than pp40 and pp30. With the exception of ppw with crimp properties, pp30 and pp40 were found to have a hairiness index greater than ppr, ppa. In the microscopic photographs of polypropylene spun yarn, pp30, which had the highest hairiness index, was found to have a thick yarn and a large number of hairs, and ppw had hairs of 3 mm or more protruding elongated outwardly.

• Journal of Welding and Joining
• /
• 제31권5호
• /
• pp.47-53
• /
• 2013

We have investigated the traits of clad metals in hot-rolled clad steel plates, including the sensitization and mechanical properties of STS 316 steel plate and carbon steel (A516), under various specific circumstances regarding post heat treatment, multilayered welds, and thick or repeated welds for repair. For evaluations, sectioned weldments and external surfaces were investigated to reveal the degree of sensitization by micro vickers hardness, tensile, and etching tests the results were compared with those of EPR tests. The clad steel plates were butt-welded using FCAW and SAW with the time of heat treatment as the variable, a that was conducted at $625^{\circ}C$, for 80, 160, 320, 640, and 1280 min. Then, the change in corrosion resistance was evaluated in these specimens. With carbon steel (A516), as the heat treatment time increased, the annealing effect caused the tensile strength to decrease. The micro-hardness gradually increased and decreased after 640 min. The elongation and contraction of the area also increased gradually. The oxalic acid etch test and EPR test on STS316 and the clad metal showed STEP structure and no sensitization. From the test results on multi-layered and repair welds, it could be concluded that there is no effect on the corrosion resistance of clad metals. The purpose of this study was to suggest some considerations for developing on-site techniques to evaluate the sensitization of stainless steels.

• Fibers and Polymers
• /
• 제4권3호
• /
• pp.114-118
• /
• 2003

The prepolymer and the final polyurethane (PU) block copolymer were synthesized by reacting 4,4-methylene bis(phenylisocyanate) with poly(tetramethylene glycol) and the prepolymer with 1,4-butanediol as a chain extender, respectively, to investigate the relation between phase separation and it's resulting properties. According to FT-IR data, the phase separation of hard and soft segments in the prepolymer and the PU block copolymer grew bigger by increasing the hard segment content, and the PU showed more dominant phase separation than the prepolymer. The heat of fusion due to soft segments decreased in both the prepolymer and the PU by increasing the hard segment content, whereas the heat of fusion due to hard segments increased in the PU did not appear in the prepolymers. The breaking stress and modulus of the prepolymer increased by increasing the hard segment content, and the elongation at break decreased gradually, and the PU showed the highest breaking stress and modulus at 58% hard segment content. However, the best shape recovery of the PU was obtained at 47% hard segment content due to the existence of proper interaction among the hard segments for shape memory effect. Consequently, the mechanical properties and shape memory effect of the PU were influenced by the degree of phase separation, depending on the incorporation of chain extender as well as the hard segment content.

• 한국식품영양과학회지
• /
• 제31권3호
• /
• pp.475-481
• /
• 2002

분해성 천연 고분자인 PHB와 chitosan을 블렌드하여 필름을 제조한뒤 필름의 결정특성 및 물리적 성질을 측정한 결과 PHB/chitosan 필름의 X선 회절도 측정에서 상대 결정화도는 chitosan의 함량이 증가할수록 낮아졌으며 FT-lR 측정에서는 chitosan 비율이 증가할수록 PHB의 carbonyl기 의 피크가 작아졌다. DSC측정에 의한 필름의 열적 특성에서는chitosan의 첨가로 인해 열안정성과 결정성이 낮아지는 경향을 보였다. 시차주사현미경을 이용하여 관찰한 필름의 표면상태에서는 chitosan의 비율이 증가할수록 입자크기가 감소하는 것으로 나타났다. 필름의 물성은 PHB에 대한 chitosan의 함량이 증가할수록 인장강도와 신장률이 증가하여 chitosan 첨가로 인해 필름의 물성이 향상된 것을 알 수 있었다. PHB/chitosan필름의 색도 측정 결과 PHB에 chitosan의 함량이 증가할수록 L값과 b값은 낮아지고 필름의 투명도는 높아졌다.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.41-47
• /
• 1999

The scale of dendritic structure of a cast preform plays a key role in determining the mechanical properties of cast/forged products. In this study, casting experiments are carried out to reduce dendrite arm spacing (DAS) to smaller than 20 ${\mu}$m by increasing cooling rate of the mold and then to spheriodize dendritic structures by addition of alloying elements such as Zr and Ti-B. From the casting experiments, appropriate casting conditions for producing the cast preform of a motorcycle connecting rod are obtained. To obtain fine microstructures of the cast preform, mold temperature must set to be low whilst cooling rate being high. When cooling rate is 10 $^{\circ}C$/s, the size of DAS is 17.4 ${\mu}$m. And the degree of spheriodization of a grain in the cast preform is described by aspect ratio, which is defined as the ratio of major and minor radii of an elliptical grain. When 0.5% Zr and 0.24 % Ti+B are added to the molten aluminum alloy, the best aspect-ratio 0.75 is obtained. After forging the cast preform of a motorcycle connecting rod, the microstructure and mechanical properties of the cast preform are compared with those of the cast/forged product. Cast/forged products are superior in microstructure and in mechanical properties such as ultimate strength, elongation, and hardness.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년도 추계학술발표대회 논문집
• /
• pp.146-150
• /
• 2009

Present family pattern of Korean society has been changed into nuclear family pattern based on the married couple from traditional expanded family pattern. As the entire social consciousness has been changed into private disposition, the number of independent household for 1 person has increases. Also, as the delivery age of first child became late according to the elongation of average period for the national education, the increment of average age for the first marriage and women's participation in the society, the family pattern of married couple lasts longer than used to be. Like this, considering the family formed period comprised from a household for 1 person to a household for 1married couple and senescence increase, as any response is inevitable for the requirement of residential space where 1~2 dwellers' life can be accepted economic and functionally within smaller scaled space, development and research on a plan system(flexible-typed plan) increasing the degree of freedom is required in developing plan of unit household. In the study for this, considering the change of population and social structure, I suggest the method in developing economic design responding to the differentiation, designing the change of support-system and infill-system based on the systemic comprehension about the residing environment in the family formation period and the research for main life pattern and residing environment in the family formation period in the present city life. I will set (family) composing system, develop basic and mixing typed standard model and establish the stage of applied development for the development of economic design.

• International Journal of Vascular Biomedical Engineering
• /
• 제2권1호
• /
• pp.17-24
• /
• 2004

Tumor angiogenesis was simulated using a two-dimensional computational model. The equation that governed angiogenesis comprised a tumor angiogenesis factor (TAF) conservation equation in time and space, which was solved numerically using the Galerkin finite element method. The time derivative in the equation was approximated by a forward Euler scheme. A stochastic process model was used to simulate vessel formation and vessel elongation towards a paracrine site, i.e., tumor-secreted basic fibroblast growth factor (bFGF). In this study, we assumed a two-dimensional model that represented a thin (1.0 mm) slice of the tumor. The growth of the tumor over time was modeled according to the dynamic value of bFGF secreted within the tumor. The data used for the model were based on a previously reported model of a brain tumor in which four distinct stages (namely multicellular spherical, first detectable lesion, diagnosis, and death of the virtual patient) were modeled. In our study, computation was not continued beyond the 'diagnosis' time point to avoid the computational complexity of analyzing numerous vascular branches. The numerical solutions revealed that no bFGF remained within the region in which vessels developed, owing to the uptake of bFGF by endothelial cells. Consequently, a sharp, declining gradient of bFGF existed near the surface of the tumor. The vascular architecture developed numerous branches close to the tumor surface (the brush-border effect). Asymmetrical tumor growth was associated with a greater degree of branching at the tumor surface.

• 공업화학
• /
• 제5권6호
• /
• pp.990-997
• /
• 1994

천연고무 라텍스(NRL)와 메틸메타 크릴레이트가 그라프트된 라텍스(MGL)를 각종 첨가제와 혼합하여 dipping공정으로 가황된 NR 및 블렌드 필름을 제조하였다. NR 필름 제조의 최적조건을 규명하기 위하여 숙성시간에 따른 팽윤도, 인장강도 및 $110^{\circ}C$에서 가황시간의 변화에 따른 기계적 특성을 비교하였다. 필름 표면의 구조 및 미끄럼성을 조사하기 위하여 접촉각 및 정 동마찰계수를 측정한 결과, 접촉각은 MGL의 블렌드 비율이 증가할수록 감소하였고, 정 및 동마찰계수는 NR 필름에 비하여 NR/MG과 NR-d-MG 필름이 현저히 감소하여 표면 미끄럼성이 향상됨을 알 수 있었다.

• 한국식품조리과학회지
• /
• 제18권2호
• /
• pp.206-210
• /
• 2002

식빵의 외형 특성과 속질의 기공들을 정확히 평가하기 위해서 우리밀 함량을 달리한 식빵들을 만들어 스캐너와 CrumbScan을 이용해서 객관적으로 분석하였다. 껍질의 두께는 우리밀 함량이 높을수록 얇아졌으며, 20%나 30%의 경우 두께는 0.31cm로 같았다. 또한 우리밀의 증가는 부피의 증가와도 관계가 있었으며, 20%의 경우에서 대조구와 비교하여 최대 22.1%의 증가가 있었으나, 30%의 경우에는 다소 부피가 감소하여 구조력의 약화를 보였다. 식빵 속질은 우리밀이 첨가될수록 조밀도가 낮아져서 기공의 크기가 커졌으나, 오히려 일정한 크기의 기공이 분포됨을 알 수 있었다. 기공의 형태도 우리밀이 첨가되면 덜 찌그러지는 것으로 나타나서 반죽의 탄성이 줄고 점성이 증가되는 것을 알 수 있었다. 절단 위치에 따른 분석에서 전반적인 기공의 형태는 차이가 없었다. 기공의 찌그러진 정도는 껍질 부분이 가장 심했으며 중심 부분이 가장 원형인 것으로 나타났다. 특히 가운데 절단면의 경우 가장자리 부분과 비교하여 급격한 찌그러짐을 보여 식빵의 중심부가 오븐 팽창이 많음을 보여 주었다결과적으로 우리밀 20% 함량의 식빵이 가장 좋은 품질을 갖는 것으로 나타났으며, 주관적으로는 매우 얻기 어려운 껍질의 두께나 기공의 조밀성 및 분포등을 통해 객관적인 평가를 할 수 있었다. 이러한 실험 결과는 국내에서 식빵 품질에 대한 표준화 작업이 이루어진다면 상당히 유용하게 사용되리라 생각된다.