• 소성∙가공
• /
• 제13권2호
• /
• pp.148-153
• /
• 2004

Finite element analysis of open die forging process to make rectangular billet has been performed in this study. Three dimensional rigid-plastic finite element method was used to analyze the effects of process variables, forging pass design and die configurations on the void closure phenomena to maximize the internal deformation for better structural homogeneity and center-line consolidation of the rectangular billet. The effect of anvil width ratio, anvil pitch, anvil shape and number of pass has been estimated by the degree of void closure ratio. Although it is difficult to optimize process parameters in the operational environments, favourable process conditions are suggested for better product quality.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.325-332
• /
• 2003

In general, soil characteristics are estimated through the sample gathered by field boring without considering sample disturbance. However, soil characteristics must be changed by the degree of sample disturbance. Therefore it be need to estimate the soil characteristic considering sample disturbance which can be occurred by the change of stress condition, sampling technique and handling method. On this study, we analyzed the sample disturbance by using the methods of volume change, residual effective stress, elastic modulus and the curve of consolidation tests. In order to estimate the relationship between sample disturbance and soil characteristics, we used the piston sample and the block sample. As the results, it should be considered in design that the disturbance of the block sample, which affects the strength and compression properties of clay, is smaller than the disturbance of piston sample.

• Journal of Korean Neurosurgical Society
• /
• 제55권2호
• /
• pp.73-77
• /
• 2014

Objective : The purpose of this study was to evaluate the efficacy of implant removal of percutaneous short segment fixation after vertebral fracture consolidation in terms of motion preservation. Methods : Between May 2007 and January 2011, 44 patients underwent percutaneous short segment screw fixation due to a thoracolumbar burst fracture. Sixteen of these patients, who underwent implant removal 12 months after screw fixation, were enrolled in this study. Motor power was intact in all patients, despite significant vertebral height loss and canal compromise. The patients were divided into two groups by degree of osteoporosis : Group A (n=8), the non-osteoporotic group, and Group B (n=8), the osteoporotic group. Imaging and clinical findings including vertebral height loss, kyphotic angle, range of motion (ROM), and complications were analyzed. Results : Significant pain relief was achieved in both groups at final follow-up versus preoperative values. In terms of vertebral height loss, both groups showed significant improvement at 12 months after screw fixation and restored vertebral height was maintained to final follow-up in spite of some correction loss. ROM (measured using Cobb's method) in flexion and extension in Group A was $10.5^{\circ}$ ($19.5/9.0^{\circ}$) at last follow-up, and in Group B was $10.2^{\circ}$ ($18.8/8.6^{\circ}$) at last follow-up. Both groups showed marked improvement in ROM as compared with the screw fixation state, which was considered motionless. Conclusion : Removal of percutaneous implants after vertebral fracture consolidation can be an effective treatment to preserve motion regardless of osteoporosis for thoracolumbar burst fractures.

• 한국컴퓨터정보학회논문지
• /
• 제11권5호
• /
• pp.299-310
• /
• 2006

본 연구는 지방행정구역의 개편의 일환으로 도시지역와 농촌지역이 통합을 이룬 도농복합 형태의 지역사회가 주민에게 제공하는 행정서비스가 주민 만족도 및 삶의 질의 제고에 얼마나 영향을 미치는가를 분석하기 위해 요인분석을 통하여 연구하였다. 전국 46개 도농통합시 중에서 1995년 1월 통합한 순천시, 광양시, 나주시 및 1998년 4월 자발적 통합을 이룬 여수시 등 전남지역 4개 도농복합 형태의 지역사회를 중심으로 주민들을 대상으로 경험적 조사를 통한 실증적 연구를 실시하였다. 본 연구의 대상은 도농통합 지역사회 주민 270명을 유효 표본으로 추출하여 설문을 실시하고 SPSSWIN 프로그램을 통하여 분석하였다. 요인분석 결과 지역사회 대주민 행정서비스의 만족도는 행정서비스의 형평성, 행정서비스의 대주민 대응성, 행정서비스의 능률성, 행정기관의 접근용이성이 중요한 요인으로 도출되었다.

• 한국지반공학회논문집
• /
• 제26권11호
• /
• pp.99-110
• /
• 2010

연구에서는 부주면마찰력이 발생하는 3개 지역 총 16본 말뚝의 현장 계측 자료들을 바탕으로 국내 지반 특성에 맞는 주면마찰계수($\alpha$, $\beta$ 계수)의 분포범위를 압밀도(U)와 역청재(S.L) 도포 유무에 따라 역산정하였다. 역청재 도포 말뚝의 부주면마찰력 저감효과는 50~90% 정도인 것으로 나타났으며, 기존 설계에 사용되던 제안 값과의 비교를 통해, 본 연구에서 산정된 $\alpha$와 $\beta$계수가 적정 범위에 있으며, 그 결과 국내지반조건을 반영한 말뚝의 장, 단기 주면마찰력을 예측할 수 있는 기본자료를 제시하였다.

• 한국지반신소재학회논문집
• /
• 제7권4호
• /
• pp.37-45
• /
• 2008

친환경배수재에 대한 현장 적용성을 평가하기 위해 연직배수재와 수평배수재 설치 조합으로 현장시험시공을 수행하였다. 본 시험시공에서는 기존의 천연섬유배수재(FDB)와 새로 개발한 볏짚배수재(SDB) 그리고 플라스틱배수재(PDB)를 연직배수재로 설치하였으며, 화이버매트와 샌드매트를 수평배수재로 사용하였다. 볏짚배수재(SDB) 설치지역을 제외하고는 플라스틱배수재(PDB)와 천연섬유배수재(FDB) 설치 지역에서 측정한 지표침하발생속도와 과잉간극수압 발생/소산 양상은 거의 유사한 것으로 나타났으며, 1차 압밀방치기간동안 측정된 상부 연약층의 콘관입저항력도 설치된 연직배수재 종류와 상관없이 일정하게 증가한 것으로 나타나 천연섬유배수재가 기존의 플라스틱이나 모래재료를 대체할 수 있을 것으로 판단된다.

• Tuberculosis and Respiratory Diseases
• /
• 제81권2호
• /
• pp.156-162
• /
• 2018

Background: Eosinophilia is well recognized in specific conditions. The objective of the present study was to determine clinico-radiologic characteristics of eosinophilia and changes in prevalence over 10 years in recipients of private health screening program at a tertiary hospital in Korea. Methods: Data of private health screening program recipients at the health promotion center of Chung-Ang University Hospital from 2004 to 2013 were collected. Health-related questionnaires and laboratory findings of private health screening program with possible relation with eosinophilia were reviewed. Results of enzyme-linked immunosorbent assay (ELISA) for parasite, chest computed tomography, and pulmonary function test were also reviewed. Results: The cumulative prevalence of eosinophilia was 4.0% (1,963 of 48,928). Prevalence of eosinophilia showed a decreased trend from 2004 to 2013. Most cases (96.6%) had mild degree of eosinophilia. Eosinophilic subjects were older and male-predominant. They showed lower levels of forced expiratory volume in 1 second ($FEV_1%$), forced vital capacity (FVC%), and $FEV_1/FVC$ than those without eosinophilia. Eosinophilic subjects showed higher positive rate for common parasite in ELISA than those without eosinophilia. On radiologic findings, consolidation and ground glass opacities were positively associated with the degree of eosinophilia. When eosinophil was classified based on severity, statistically significant correlation between the severity of eosinophil and radiologic abnormalities was found. Conclusion: Eosinophilia is uncommon in healthy population. It usually occurs at a mild degree. Eosinophilic patients have more radiologic abnormalities compared to those without eosinophilia. Such radiologic abnormalities are associated with the severity of eosinophilia.

• 펄프종이기술
• /
• 제30권3호
• /
• pp.74-83
• /
• 1998

The phenomenon of decrease in sizing efficiency when the stock temperature is increased is well recognized as summer sizing, and this is believed to be caused by uneven distribution of sizing agents on paper surface most often incurred by coagulation of sizing agents. When unevenly sized paper is used as coating base stock, nonuniform consolidation of the coating layer may result, which, in turn, causes uneven distribution of binder on coating surface. This causes nonuniform ink absorption to produce print mottle. In this study the effects of simple or polymeric electrolytes, storage temperature and time on the coagulation of cationic dispersed rosin size were investigated using a turbidity measurement method which was verified to correlate well with the particle size of rosin emulsion or its coagulates. Handsheets sized with rosin dispersions coagulated under various conditions were prepared and their sizing degree and coated paper properties including gloss and ink density were examined. The relationship between the sizing nonuniformity of coated papers and its ink absorption property was evaluated. Turbidity of rosin emulsion increased as the storage temperature and time were increased. Addition of simple or polymeric electrolytes caused reduction in $zeta$ -potential of the rosin dispersion and accelerated the coagulation tendency substantially. Reversion of the $zeta$ -potential of rosin dispersion, however, did not occur when coagulation was induced with simple electrolytes. On the other hand, addition of an anionic polyelectrolyte reversed the $zeta$ -potential of the flocculated rosin dispersion. This indicated that electrical double layer compaction and bridging flocculation were coagulation mechanisms for simple and polymeric electrolytes, respectively. Sizing degree decreased as coagulation of rosin was increased. Paper gloss, ink gloss and ink density were increased when sizing degree of base stock was increased most probably due to prevention of base paper swelling and increased binder migration to coating surface. This suggested that uneven printing ink density occurred when uneven sizing development was induced by coagulation of rosin particles.

• 대한토목학회논문집
• /
• 제28권6C호
• /
• pp.321-329
• /
• 2008

본 연구에서는 전통적인 압밀촉진공법의 단점을 보완하기 위한 방법으로 석션보드드레인 공법을 제안하고, 본 공법의 개량특성을 파악하기 위해, 배수재 종류 및 단계 진공압 조건에 따른 일련의 Column 실험을 실시하였다. 이때 실험 간 발생되는 침하량과 실험 종료 후 발생된 함수비 저감효과 및 강도증진효과를 파악하고, 개량 기간에 따른 압밀도를 파악하여 각 조건에 따른 최적의 석션보드드레인 공법 영향인자를 산정하고자 하였다. 각 배수재(포켓식 성곽형, 코일형, 하모니카 형, 원형 및 열융착식 성곽형배수재) 종류에 따른 개량 효과를 파악하기 위한 실험 결과, Core 형상(원형, 판형)과 필터의 Core 부착 여부(포켓식, 열융착식)에 의해 열융착식 성곽형 배수재와 포켓식 원형배수재의 배수효율이 다른 배수재의 경우 보다 좋게 나타났다. 단계석션압 조건 실험의 경우 최종 단계석션압인 $-0.8\;kg/cm^2$으로의 기간이 짧을수록 개량도가 크게 나타났다. 또한 각 석션압 단계 별 압밀도-적용기간 곡선 상의 변곡점을 이용하여 압밀효과를 극대화 시킬 수 있는 적용기간을 산정할 수 있었다.

• 한국지반환경공학회 논문집
• /
• 제1권1호
• /
• pp.5-12
• /
• 2000

포항 두호동 지역과 인근에 널리 분포하고 있는 이암은 공기 중에 노출되거나 물과 접하게 되며 강도가 급격히 감소되어 많은 문제점을 야기할 수 있다. 자연상태의 점성토는 $K_o$ 상태로 존재하며 하중재하시 주응력 방향에 따라 다르게 거동하는 이방적 특성을 갖는다. 따라서, 본 연구에서는 현장상태와 동일한 $K_o$ 압밀을 행한 후 각기 다른 방향에서 샘플링한 시료에 대하여 전단재하속도를 달리하며 삼축압축시험을 수행하였다. 그리고 시험에서 얻어진 응력 - 변형거동 결과를 Cam-clay 모델에 의한 예측결과와 비교 검토하였다. 시험결과에 의하면, 샘플링각도가 수직방향에서 수평방향으로 증가함에 따라 $K_o$ 값은 감소하였으며, 이암풍화토에서는 변형을 연화거동을 나타내고 있다. 전반적으로 실험결과와 Cam-clay 모델의 거동양상은 비슷하지만, 측차응력에 대한 실험결과가 예측결과보다 훨씬 크게 나타났다. 그리고, $K_o$ 압밀된 이암풍화토의 응력-변형거동의 예측에 대한 Cam-Clay model의 적응성은 만족스럽지 못한 것으로 나타났다.