• Journal of Welding and Joining
• /
• v.29 no.4
• /
• pp.93-99
• /
• 2011

This study was performed to compare the shear strength of the bondings between stainless steel crown/direct type composite resin and stainless steel crown/indirect type composite resin. Four groups of bonding conditions were prepared. Two groups of bonding conditions were made by the indirect type composite resin system and the other two groups were made by the direct type composite resin system. The shear strength tests were carried out using universal testing machine, Model 4465 of Instron Co.. It was indicated that the bond strength values of the indirect type composite resins were higher than those of the direct type composite resins. TE-SE group was superior to the TE-ONE in indirect type resin system. These results were thought to be the high degree of the polymerization accompanied with temperature and pressure of the resin of indirect type resin. It was also found that indirect composite resin contains less amount of porosity in resin.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.34-37
• /
• 2000

The effect of novel N-crotyl-N,N-dimethyl-4-methylanilinium hexafluroantimonate (CMH) curing agent on cure behavior and thermal properties of DGEBA epoxy cationic system was investigated. From DSC measurements of DGEBA/CMH system, it was shown that this system exhibits an excellent thermal latent characteristic in a given temperature and reveals complex cure behavior as indicated by multiple exotherms. The conversion and conversion rate of DGEBA/CMH system increased with increasing the concentration of initiator due to high activity of CMH. Viscoelastic properties during gel formation of DGEBA with CMH were investigated by rheological techniques under isothermal condition. The gel time obtained from the modulus crossover. point t(G')=G", was affected by high curing temperature and concentration of CMH, resulting in high degree of network formation in cationic polymerization. The thermal stabilities were discussed in terms of the activation energy for decomposition and thermal factors determined from TGA measurements.ents.

• Journal of Technologic Dentistry
• /
• v.35 no.4
• /
• pp.287-293
• /
• 2013

Purpose: This study is to provide basic data of the dental acrylic denture base resin in the mechanical property difference investigation according to the monomer composition weight ratio of the acrylic denture base resin. Methods: The monomer composition of the acrylic denture base resin and weight ratio makes the different specimen. It measured the mechanical property with the specimens through Hardness Test, Tensile Test, Flexural Test, Flexural Modulus, FT-IR Test. Results: The control group Vertex was 18.4 Hv and the experimental group MED was 14.46~19.07Hv in the hardness test. Vertex was 364N, MED-3 was lowest in the tensile strength test and the Head of a family cursor declination was big. The result declination of the experimental specimens showed. Vertex and MED-2 was the highestest in the flexural test and after coming MED-6, MED-5, MED-1, MED-3, MED-4. Vertex and MED-2, as to a spectrum for $500{\sim}1800cm^{-1}$ peak can show the excellent degree of polymerization in the FT-IR Test. Conclusion: The ideal weight ratio of the monomer of the acrylic denture base resin of which the mechanical property is the highestest was MMA 100g, EDGMA 5g, DMA 0.2g, of MED-2.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.378-384
• /
• 2010

Regenerated cellulose was prepared from Buckeye wood pulp V60 via dissolution in N-methylmorpholin N-oxide (NMMO) solvent system. The effect of antioxidants such as, n-propylgallate (PG), tris(nonylphenyl) phosphite (TRIS), ethylenediamine tetraacetic acid disodium salt (EDTA), and magnesium sulfate on the properties of regenerated cellulose was studied using X-ray diffraction, copper index calculation, and viscometry. Only addition of more than 0.01% of PG into NMMO solvent was effective to avoid the reduction of the degree of polymerization(DP) of regenerated cellulose during dissolution at $110^{\circ}C$. However, the early stage(within 0.5h of dissolution process) degradation of cellulose was not prevented eventhough up to 0.5% PG was appled to hot NMMO system. In addition, to recover the expensive NMMO after cellulose regenerating process, the washing filtrate was studied using simple techniques, such as refractive index, pH, and conductivity measurements. Through conductivity measurement result, 4-time of washing was enough to remove the NMMO completely from regenerated cellulose.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.1
• /
• pp.20-28
• /
• 2001

Acrylic quarternary polymers were synthesized to prepare high-solid coatings. Acrylic resins were synthesized by the radical polymerization of n-butyl acrylate, methyl methacrylate, 2-hydroxyethyl methacrylate and acetoacetoxyethyl methacrylate. From the results of experiment on reaction condition to get high-solid acrylic resins with 70% solid content and viscosity of 1200cps, it was found that di-tert-amyl peroxide among the four types of initiators have lower viscosity and higher degree of conversion. The optinum initiator amount, chain transfer agent, reaction temperature and the dropping time were 5wt%, 4wt%, $150^{\circ}C$ and 5hrs, respectively.

• Textile Coloration and Finishing
• /
• v.33 no.2
• /
• pp.64-71
• /
• 2021

Large amount of formaldehyde could be released inevitably during the flame-retardant (FR) treatments or from the finished fabrics using Provatex reagent and Proban polymers which have been used as durable FRs for cotton. A water-soluble cyclophosphazene derivative was synthesized as an ecofriendly phosphorus-based FR for cotton fibers. Dichloro tetrakis{N-[3-(Dimethylamino)propyl]methacrylamido} cyclcophosphazene (DCTDCP) was synthesized through the substiutution reaction of Hexachloro cyclophosphazene and N-[3-(Dimethylamino)propyl] methacrylamide at a mole ratio of 1 : 4, which can be cured dually by both alkaline treatment and UV irradiation. More crosslinked networks were produced through the addition of Triacryloyl hexahydrotriazine and Acrylamide as a UV-curable crosslinker and a comonomer respectively. Both flame retardancy and washing durability of the FR cotton were improved synergistically. The durability improvement may be caused by the covalent bond formation of the FR with cellulose and the high degree of polymerization of DCTDCP, which can be verified by the pyrolysis and combustion behaviors analyzed by LOI, TGA, and microcalorimeter.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.5
• /
• pp.837-845
• /
• 2016

A novel endodextranase isolated from Paenibacillus sp. was found to produce isomaltotetraose and small amounts of cycloisomaltooligosaccharides with a degree of polymerization of 7-14 from dextran. To determine the active site, the enzyme was modified with 1-ethyl-3-[3-(dimethylamino)-propyl]-carbodiimide (EDC) and α-epoxyalkyl α-glucosides (EAGs), an affinity labeling reagent. The inactivation followed pseudo first-order kinetics. Kinetic analysis and chemical modification using EDC and EAGs indicated that carboxyl groups are essential for the enzymatic activity. Three Asp and one Glu residues were identified as candidate catalytic amino acids, since these residues are completely conserved across the GH family of 66 enzymes. Replacement of Asp189, Asp340, or Glu412 completely abolished the enzyme activity, indicating that these residues are essential for catalytic activity.

• Microbiology and Biotechnology Letters
• /
• v.27 no.4
• /
• pp.304-310
• /
• 1999

We have developed a new process for the production of new structure oligosaccharides using the mixed-culture fementation of Lipomyces starkeyi KSM22 and leuconostoc mesenteroides B-512FMCM.L.starkeyi KSM22 produces a novel DXAMase(an enzyme containing both dextranase and amylase activities). It hydrolyzes the soluble starch and dextran. The hydrolyzates were used as acceptors for dextransucrase of L.mesenteroides to synthesize the new oligosaccharides(NOS). In fermentation, as the concentration of sucrose was increased from 9%(w/v) to 15%(w/v), the yields of dextran(sum of dextran I, MW=66kD, and dextran II, MW=21kD) was increased from 12.7% to 42.5%, and NOS was increased from 3.9% to 5.2% of the theoretical, respectively. The NOS of dp(degree of polymerization) 5 and over was increased from 33.1% to 58.3% of the total NOS. The NOS showed heat resistant up to 12$0^{\circ}C$ and was stable at pHs ranged from 2 to 6. The NOS decreased the pH changes in the culture of S. mutans, and also showed inhibitory effects on the growth of S. aureus or S. typhimurium.

• Microbiology and Biotechnology Letters
• /
• v.32 no.4
• /
• pp.347-351
• /
• 2004

Hydrolysis of manno-oligosaccharides and galactomannan was studied with the purified Bacillus subtilis WL-7 mannanase from recombinant Eschericoli. The predominant products of hydrolysis were mannose, mannobiose and mannotriose. The enzyme could hydrolyze $\beta$-1 A-linked manno-oligosaccharides larger than mannobiose, but was not active on mannobiose. When the mannanase hydrolyzed manno-oligo saccharides of degree of polymerization(DP) 4-6, it was more active on the substrate of higher DP. Based on analysis of transient reaction products by TLC, the enzyme was found to have a preference for internal $\beta$-IA-mannosidic linkages, which are the central mannosidic bond of mannotetraose and the two middle mannosidic bonds of mannopentaose. The $\beta$-l A-mannosidic bonds situated at the second and fourth positions from the nonreducing end of mannohexaose were preferenhydrolyzed by the mannanase. Locust bean gum(LBG) was enzymatically hydrolyzed with higher efficiency than guar gum, resulting that amount of reducing sugars was liberated more efficiently from LBG than guar gum with same activity of mannanase.

• Korean Journal of Food Science and Technology
• /
• v.25 no.3
• /
• pp.264-269
• /
• 1993

Molecular structural properties of legume starches were investigated. In intrinsic viscosity and degree of Polymerization of amylose and amylopectins, cow pea and mung bean were high, but kidney bean was low. Low molecular weight fractions for kidney bean starch were much eluted by gel chromatography. In the elution profiles of their amylose by Sepharose 2B-CL, molecular weight of kidney bean amylose was smaller than that of other amylose Molecular weights of cow pea and mung bean amyloses were large, but that of kidney bean amylose was small and red bean amylose was medium. The elution profiles by Sephadex G-50 after debranching amylopectins with pullulanase showed similar patterns.