• Elastomers and Composites
• /
• 제37권1호
• /
• pp.21-30
• /
• 2002

개시제 ammonium persulfate(APS)와 유화제 sodium dodecyl benzene sulfonate(SDBS)를 이용하여 methyl methacrylate(MMA), styrene(St), ethyl acrylate(EA)등의 단량체를 core(내부)와 shell(외부)의 폴리머성분이 다른 core-shell 폴리머를 합성하고 각 core-shell 폴리머에 대한 구조를 연구하였다. 한 입자의 내부와 외부의 고분자 조성이 다른 composite 라텍스는 고분자 블렌딩과 공중합의 물성과는 달리 한 입자 내에서도 상반된 두 가지 물성을 동시에 나타내는 특성으로 인하여 여러 산업 분야에 응용이 가능하다. 그러나, core-shell 라텍스를 제조할 때 반응중입자가 성장하는 과정에서 입자의 응집과 중합율이 떨어지고, 라텍스의 응용시 기계적 안정성이 문제점으로 되고 있다. 따라서 shell 중합시에 새로운 입자의 생성이 적고 중합중 안정성이 우수한 라텍스를 제조하기 위해 유화제농도, 개시제농도, 중합온도가 PMMA/PSt과 PSt/PMMA의 core-shell 구조에 미치는 영향과 중합 후 입도분석기(particle size analyzer; PSA) 및 투과전자현미경(transmission electron microscope; TEM)을 이용하여 실제 입자측정과 입자형태 특성을 확인하였으며 시차주사열량계(differential scanning calorimeter, DSC)를 이용하여 유리전이온도($T_g$)의 측정, 최저성막온도(minimum film formation temperature; MFFT), NaOH 첨가에 의한 가수 분해에 따르는 pH를 측정하여 core-shell의 새로운 특성을 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.17-40
• /
• 2000

Resin cements are used for cementing indirect esthetic restorations such as resin or porcelain inlays. Because of its limitations in curing of purely light cured resin cements due to attenuation of the curing light by intervening materials, dual cured resin cements are recommended for cementing restorations. The physical properties of resin cements are greatly influenced by the extent to which a resin cures and the degree of cure is an important factor in the success of the inlay. The purpose of this study was to evaluate the influence of porcelain thickness and exposure time on the polymerization of resin cements by measuring the microhardness and the degree of conversion, to investigate the nature of the correlation between two methods mentioned above, and to determine the exposure time needed to harden resin cements through various thickness of porcelain. The degree of resin cure was evaluated by the measurements of microhardness [Vickers Hardness Number(VHN)] and degree of conversion(DC), as determined by Fourier Transform Infrared Spectroscopy(FTIR) on one light cured composite resin [Z-100(Z)] and three dual cured resin cements [Duo cement(D), 3M Resin cement(R), and Dual cement(DA)] which were cured under porcelain discs thickness of 0mm, 1mm, 2mm, 3mm with light exposure time of 40sec, 80sec, 120sec, and regression analysis was performed to determine the correlation between VHN and DC. In addition, to determine the exposure time needed to harden resin cements under various thickness of porcelain discs, the changes of the intensity of light attenuated by 1mm, 2mm, and 3mm thickness of porcelain discs were measured using the curing radiometer. The results were obtained as follows ; 1. The values of microhardness and the degree of conversion of resin cements without intervening porcelain discs were 31~109VHN and 51~63%, respectively. In the microhardness Z was the highest, followed by R, D, DA. In the degree of conversion, D and DA was significantly greater than Z and R(p<0.05). 2. The microhardness and the degree of conversion of the resin cements decreased with increasing thickness of porcelain discs, and increased with increasing exposure time, D and R showed great variation with inlay thickness and exposure time, whereas, DA showed a little variation. 3. The intensity of light through 1mm, 2mm, and 3mm porcelain inlays decreased by 0.43, 0.25, and 0.14 times compared to direct illumination, and the respective needed exposure times are 53 sec, 70 sec, and 93 sec. In D and R, 40 sec of light irradiation through 2mm porcelain disc and 80 sec of light irradiation through 3mm porcelain disc were not enough to complete curing. 4. The microhardness and the degree of conversion of the resin cements showed a positive correlationship(R=0.791~0.965) in the order of R, D, Z, DA. As the thickness of porcelain discs increased, the decreasing pattern of microhardness was different from that of the degree of conversion, however.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권4호
• /
• pp.263-273
• /
• 2019

OF 케이블의 예상 설계 수명인 30년이 도달하면서 고장 위험성이 증가하고 있다. 따라서 정확한 진단을 통한 열화 판정으로 장기 운용 OF 케이블을 적기에 진단함으로써 고장을 예방해야 한다. 또한 최적의 진단기준을 제시하여 잔류 수명을 예측하고 적절한 시기에 교체하는 조치가 요구되고 있다. 현재 한국전력공사에서는 OF 케이블을 진단하기 위해서 주기적으로 케이블 유중 가스분석을 실시하여 C₂H₂, TCG 등 일부 가스만 활용하고 있다. 하지만 이러한 유중 가스분석에서 확인되는 가스는 절연지뿐만 아니라 오일의 열화에 의해서도 발생된다. OF 케이블은 해체점검이 불가하기 때문에 절연지의 수명이 OF 케이블의 수명으로 간주되고 있다. 따라서 절연지를 직접적으로 분석하는 절연지 중합도 평가와 절연유중 퓨란화합물을 분석이 필요하며, 유중 가스분석에서 확인되는 CO, H₂, CH₄, C₂H₄, C₂H₆, C₂H₂ 가스와 상관관계를 확인할 필요가 있다. 따라서 본 연구에서는 절연유중 가스를 분석하기 위해 headspace sampler가 장착된 GC를 사용하였고, 절연지 중합도는 자동점도계를 활용하였으며, 절연유중 퓨란화합물은 HPLC를 이용하여 측정하였다. 또한 OF 케이블의 종합적인 판정을 위하여 국내 OF 케이블 중 15개소를 선정하여 해체점검을 수행하였다. 또한 이렇게 얻어진 결과는 최근 전력설비 이상판정에 도입되고 있는 SVM 기법에 적용하여 정확하고 신뢰성 있는 열화판정을 도출하고자 하였다. 그 결과 절연지 중합도 잔률은 CO와 CO₂ 농도의 합에 따라 음의 2차 함수 관계로 감소하는 것으로 확인되었다. 또한 본 연구에서 얻어진 한전 OF 케이블 진단결과를 SVM 기법에 적용함으로써 한전 OF 케이블 진단결과를 기존 일본 동경전력의 SVM에 적용한 진단결과보다 향상되었고, 그 정확도는 약 87.9% 인 것으로 확인되었다.

• 한국수산과학회지
• /
• 제30권1호
• /
• pp.31-38
• /
• 1997

추출조건에 따른 다시마 alginate의 성질을 조사하기 위하여 추출용매인 $Na_{2}CO_{3}$의 농도를 1, 3, 및 $5\%$로 각각 조절하고 추출시간을 각각 1, 3, 5 및 10시간으로 하였을때 각 추출조건에서 추출된 alginate의 bile acids 결합능과 물리화학적 특성을 조사한 결과는 다음과 같다. 건조다시마를 미세하게 마쇄할수록, $Na_{2}CO_{3}$ 농도와 추출시간이 증가할수록 alginate 추출량은 증가하였다. alginate의 bile acids와의 결합능은 저 농도의 $Na_{2}CO_{3}$ 용액으로 단시간에 추출한 것일수록 높게 나타났다. alginate에 의한 bile acids 결합능은 cholic acid에서 가장 높게 나타났고, taurocholic acid, glycocholic acid, deoxycholic acid 순으로 조사되었다. 다시마로 부터 alginate를 추출하고 남은 잔사(RAEA)의 bile acids와의 결합능은 alginate의 경우와 같이 추출 용액의 농도가 높을수록 추출시간이 길어질수록 감소하는 경향을 보였다. Bile acids와의 결합능은 cholic acid, taurocholic acid의 경우 alginate보다 다소 낮은 값을 나타냈고, glycocholic acid의 경우 alginate와 비슷한 값을 보였으나 deoxycholic acid와의 결합능은 추출된 alginate보다도 오히려 높은 값을 보였다. 추출된 alginate의 점도와 중합도는 추출용액의 농도가 증가하고 추출시간이 길어짐에 따라 감소하였으며 이에 비례하여 bile acid와의 결합능도 감소하였다.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.35-60
• /
• 1997

Physical properties of composite resins such as strength, resistance to wear, discoloration, etc, depend on the degree of conversion of the resin components. The clinical behavior of restorative resins varies brand to brand. Part of this variation is associated with the filler and differences in the polymer matrix. The polymer matrix of resins may differ because the involved monomers are dissimilar and because of variation in the catalyst system. The purpose of this study was to evaluate the degree of conversion of the composite resins according to the depth of cure and light curing time. 7mm diameter cylindrical aluminum molds were filled with each of five different hybrid light curing composite resins(Z-100, Charisma, Herculite XRV, Prisma TPH, Veridonfil) on the thin resin films. The molds were 1mm, 2mm, 3mm, 4mm, and 5mm in depth to produce resin films of various heights. Each sample was given 20sec, 40sec, and 60sec illumination with a light source. The degree of conversion of carbon double bonds to single bonds in the resin films was examined by means of Fourier Transform Infrared Spectrometer. The results were obtained as follows; 1. There was difference in the degree of conversion among five light curing composite resins according to the depth of cure for 20sec, 40sec, and 60sec illumination with light source with statistical significance(P<0.05). 2. Five light curing composite resins show lower degree of conversion at surface of the resin than depth of 1mm. 3. The degree of conversion of five light curing composite resins was siginificantly reduced from the maximum for the resin film when the light passed through as little as 1mm of each composite. 4. The degree of conversion of five light curing composite resins decrease significantly at the depth of 4mm, and polymerization was not occured at the depth of 5mm except for Prisma TPH. 5. The degree of conversion of five light curing composite resins was increased with increased light curing time, and there was no significant differences in the degree of conversion above 4mm in Z-100, 3mm in Charisma, and at depth of 5mm in Herculite XRV and Veridonfil(P>0.05).

• 한국식품조리과학회지
• /
• 제8권3호
• /
• pp.291-296
• /
• 1992

The physicochernical properties of Korean buckwheat starches were investigated. The results were as follows; 1. Water binding capacity of kangwon hull buckwheat starch was 106.55% and that of Kangwon rice buckwheat was 99.35%. 2. The pattern of change in swelling power of hull buckwheat starch for increasing temperature started to increase at 60$^{\circ}C$ and increased rapidly from 80$^{\circ}C$, and that of rice buckwheat increased slowly from 60$^{\circ}C$ to 90$^{\circ}C$. 3. The ranges of gelatinization temp. of hull buckwheat and rice buckwheat starches were 70~75$^{\circ}C$ and 75~85$^{\circ}C$, respectively. 4. The blue value of hull buckwheat starch and rice buckwheat starch were 6.25 and 0.62, respectively. 5. The alkali number of hull buckwheat starch and rice buckwheat starch were 1.28 and 3.68 respectively. 6. The amylose content of hull buckwheat and rice buckwheat starch were 32.26% and 38.09%. 7. Periodate oxidation of hull buckwheat starch resulted that amylose had me average molecular weight of 103, 004, degree of polymerizatlon of 572 and amylopectin had me degree of branching of 7.64, glucose unit per segment of 13.09, and periodate oxidation of rice buck wheat starch resulted mat amylose had me average molecular weight of 125, 654, degree of polymerization of 698 and amylopectin had degree of branching of 6.59, glucose unit per segment of 15.16.

• 한국응용과학기술학회지
• /
• 제38권1호
• /
• pp.300-308
• /
• 2021

본 연구에서는 3차원 네트워크 폴리아크릴산나트륨 겔의 가교환경을 변화시켜 기계적 강도 및 팽윤거동을 제어하고 그 물성을 평가하는 연구를 진행하였다. 일반적으로 겔 용액의 가교도가 증가함에 따라 3차원 네트워크 겔의 팽윤비는 감소하고 겔의 기계적 강도는 증가한다. 본 연구에서는 3차원 네트워크 겔 상의 가교개수밀도를 산출하여, 겔화 과정에서 가교환경에 의존하는 중합효율 및 가교효율을 확인하였다. 그 결과, 겔 용액에서 단량체와 가교제의 중량비가 동일하더라도 가교환경이 달라지면 실제 제조된 겔 내부의 가교개수밀도가 3.6배 이상 달라질 수 있음을 확인하였다. 본 연구에서 시도한 가교개수밀도 기반 겔 평가 방법을 활용하면 효과적인 VOCs 흡수제로써 3차원 네트워크 겔을 최적화 할 수 있으리라 기대된다.

• 폴리머
• /
• 제31권1호
• /
• pp.1-7
• /
• 2007

본 연구는 $Co^{60}\;{\gamma}-ray$ 선원을 이용한 그래프트 공중합 방법으로 설폰형 이온교환 섬유를 합성하였다. 공중합체 합성 시 스티렌 단량체의 농도가 50 v/v%에서 그래프트율이 가장 높게 나타났으며, 총 조사선량이 증가할수록 그래프트율은 증가하였다. 그래프트율과 반응온도가 증가함에 따라 설폰화율은 증가하였으며, 반응시간 20분에서 가장 높았다. 이온교환 섬유의 이온교환 용량과 함수율은 설폰화율이 증가함에 따라 모두 증가하였으며, 각각 최대 4.76 meq/g, 23.5%이었다. 암모니아 흡착량은 이온교환 용량 및 암모니아 농도가 증가함에 따라 증가하였으며, 10회 이상 반복 사용하여도 암모니아 흡착량은 변하지 않았다.

• Preventive Nutrition and Food Science
• /
• 제11권2호
• /
• pp.146-154
• /
• 2006

Structural modification of corn starch by gamma irradiation was evaluated for under dry conditions at varied intensities from 0 to 40 kGy. Under scanning electron microscopy, the granule shape of corn starch was not significantly affected by the irradiation up to 40 kGy. In addition, X-ray diffraction and melting patterns of the irradiated starches were similar to those of the native starch, indicating that crystalline regions in the starch granules were not changed by irradiation. However, the pattern of gel permeation column chromatography showed a significant increase in partial hydrolysis of gamma irradiated starch samples. The degree of polymerization and the paste viscosity of irradiated starch samples dose-dependently decreased significantly with irradiation, and increased solubility and clarity were observed in the irradiated starch solution. In addition, the degree of retrogradation decreased as irradiation dose increased. Irradiation of corn starch has advantages over the ordinary acid or the enzyme hydrolysis modification methods. It does not affect the granular shape and crystalline phase of starch during hydrolysis, and the process can be carried out in dry state.

• Journal of Microbiology and Biotechnology
• /
• 제8권6호
• /
• pp.568-574
• /
• 1998

Two types of chitosanases produced from Aspergillus fumigatus KH-94 were purified by ion exchange and gel permeation chromatography. Molecular weights of the enzymes are 22.5 kDa (chitosanase I) and 108 kDa (chitosanase II). pI, optimum pH, and temperature of chitosanase I are 7.3, 5.5, and 70-$80^{\circ}C$, respectively, and those of chitosanase II are 4.8, 4.5~5.5, and 50~$60^{\circ}C$, respectively. Activities of both chitosanases were increased by $Mn^{2+}$ but inhibited by $Cu^{2+}$ and $Hg^{2+}$ . Chitosanase I has endo-splitting activity that hydrolyzes chitopentaose, chitohexaose, and chitosan to chitobiose, chitotriose, and chitotetraose, whereas chitosanase II has exo-splitting activity that hydrolyzes chitobiose and chitosan to glucosamine. Chitosanase II was found to have transglycosylation activity also in the reaction of 2% more chitooligosaccharides as a substrate and at the initial reaction. The higher degree of deacetylation, the stronger activities of chitosanase Iand II toward chitosans. Both chitosanases could hydrolyze chitosan and glycol chitosan but not chitin, cellulose, and carboxymethyl cellulose. To produce higher degree of polymerization of chitooligosaccharides, chitosanase I was used and yielded 80% of recovery.