• Journal of the Korean Home Economics Association
• /
• v.41 no.6
• /
• pp.1-12
• /
• 2003

The purpose of this study were to analyze the anthropometric data of feet of Korean women with aging, to categorize the women's foot shapes, and to compare the shoe size according to the foot shapes in order to provide the basic information for more comfortable shoes. Subjects of this study were 181 women over age 20. They were measured with the direct measurement method and the indirect measurement method. 26 items were measured from the right foot and 6 items were taken on foot outline. Factor analysis, cluster analysis, analysis of variance, post-hoc test, and cross tabs were peformed for statistical analysis of the data by SPSS program. There were significant differences in height items, breadth items, girth items, and angle items by subjects' age. The older subjects' feet were wide and thick with big deformity on toes. The arch height of the older ones was low. This implicates that the degree of deformity on toes, the foot ratio, the foot girth, the foot breath and the arch height as well as the foot length are needed to be considered in developing comfortable shoes. Nine foot construction factors were extracted by the factor analysis of anthropometric measurements; foot size factor, heel and instep factor, malleolus lateralis factor, malleolus medialis factor, foot shape factor, shape of toes factor, heel height factor, big toe height factor, and internal factor. On the basis of the cluster analysis, three different foot shapes were categorized. Type 1 was large and wide foot with little deformity on little toe. Type 2 was medium foot with deformation of big toe, and with the lowest arch height. Type 3 was small and narrow foot with the highest arch height. Distribution of shoe size according to the foot shape was analyzed. The ball of foot breath was of wide distribution than the ball of foot girth. This implicates that girth items and breath items of the foot should be enclosed for the same foot length in the shoe sizing system.

• Korean Journal of Optics and Photonics
• /
• v.27 no.6
• /
• pp.223-228
• /
• 2016

The birefringence of distributed, uniaxially anisotropic molecules like liquid crystals is calculated as the degree of ordering is varied. The relation between the normalized birefringence ${\Delta}n_{rel}$ and the orientational order parameter S is investigated. The distribution function, which enables one to monitor the degree of ordering of liquid crystals including randomly distributed ones, is introduced. Using this distribution function, a series of distributed liquid crystals with order parameters ranging from 0 to 1 are generated, and ${\Delta}n_{rel}$ and S of the correspondingly distributed liquid crystals are calculated. Based on the calculated data, it is revealed that ${\Delta}n_{rel}$ and S satisfy the quasi-linear relation of $S=(1+a){\Delta}n_{rel}-a{\Delta}n^2_{rel}$, where a can be approximated as $n_o{\frac{{\Delta}n}{4}}$. The anisotropy of molecular polarizability is also calculated, using the birefringence, and separately following Vuks' method and Neugebauer's method, and it is shown that the relations between S and the molecular-polarizability anisotropy are also quasi-linear.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2582-2590
• /
• 2021

The high-energy milling is one of the most extended techniques to produce Oxide dispersion strengthened (ODS) powder steels for nuclear applications. The consequences of the high energy mill process on the final powders can be measured by means of deformation level, size, morphology and alloying degree. In this work, an ODS ferritic steel, Fe-14Cr-5Al-3W-0.4Ti-0.25Y₂O₃-0.6Zr, was fabricated using two different mechanical alloying (MA) conditions (M_std and M_act) and subsequently consolidated by Spark Plasma Sintering (SPS). Milling conditions were set to evidence the effectivity of milling by changing the revolutions per minute (rpm) and dwell milling time. Differences on the particle size distribution as well as on the stored plastic deformation were observed, determining the consolidation ability of the material and the achieved microstructure. Since recrystallization depends on the plastic deformation degree, the composition of each particle and the promoted oxide dispersion, a dual grain size distribution was attained after SPS consolidation. M_act showed the highest areas of ultrafine regions when the material is consolidated at 1100 ℃. Microhardness and small punch tests were used to evaluate the material under room temperature and up to 500 ℃. The produced materials have attained remarkable mechanical properties under high temperature conditions.

• Wind and Structures
• /
• v.38 no.2
• /
• pp.109-118
• /
• 2024

A solar concentrator is a reflective surface in the shape of a parabola that collects solar rays in a focal area. This concentrator follows the path of the sun during the day with the help of a tracking system. One of the most important issues in the design and construction of these reflectors is the force exerted by the wind. This force can sometimes disrupt the stability of the concentrator and overturn the entire system. One of the ways to estimate the force is to use the numerical solution of the air flow in three dimensions around the dish. Ansys Fluent simulation software has been used for modeling several angles of attack between 0 and 180 with respect to the horizon. From the comparison of the velocity vector lines on the dish at angles of 90 to - 90 degrees, it was found that the flow lines are more concentrated inside the dish and there is a tendency for the flow to escape around in the radial direction, which indicates the presence of more pressure distribution inside the dish. It was observed that the pressure on the concave surface was higher than the convex one. Then, the effect of adding a hole with various diameter of 200, 300, 400, 500, and 600 mm on the dish was investigated. By increasing the diameter up to the optimized size of 400 mm, a decrease in the maximum pressure value in the pressure distribution was shown inside the dish. This pressure drop decreased the drag coefficient. The effect of the hole on the dish was also investigated for the 30-degree angled dish, and it was found that the results of the 90-degree case should be considered as the basis of the design.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.1
• /
• pp.19-26
• /
• 2004

According to increase of domestic blood components use, the quality control of blood components is necessary to support good products. The purpose of this study is used to provide the producing index of the good product as compared with the accuracy and validity for the distribution of the quality control data. The value of mean, standard deviation, 95% confidence interval and degree of normal distribution of data were calculated by univariate procedure, the value of monthly mean of each blood centers per items were compared by Analysis of Variance(ANOVA) test for the degree of distribution. When there was difference among the mean values, the Duncan's multiple range test was done to confirm the difference. Finally, methods for accessing accuracy and validity of the quality data was done by the Contingency table test. The quality data of five blood centers was showed to the normal distribution and it was in a acceptable range. For each blood centers, the monthly means of Hematocrit(Hct), Platelet(PLT) and pH were not significantly different except Hct of C center, PLT of B, D center and pH of A center. The quality data per items was graded according to quality to six level. As a result of the comparative analysis, the monthly means of Hct of C and E center was significantly different higher than that of D, B and A center. The monthly means of PLT of A center and pH of C center was significantly different higher than that of the others. In the accuracy and validity of the quality control data, C center for Hct, A center for PLT and C center for pH were better than the other. The C blood center was most satisfiable and stable in the quality control for blood component. If the quality control method used in C blood center is adopted in other blood centers, the prepared level of the blood component of the center will be improved partly.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.2
• /
• pp.143-166
• /
• 1999

The success of porcelain laminate veneer depends on the bond strength between tooth structure and ceramic restoration and the design of tooth preparation. In particular, incisal coverage and incisal finish line are the two most important factors in long-term fracture resistance. Although the majority of clinicians are practicing incisal coverage and there are various opinions on the geo-metrical ratio between the clinical crown length of the remaining tooth structure and the length of incisal extension in porcelain laminate veneer and the optimal incisal finish lines. scientific evidence still loaves much to be desired. The purpose of this study was to determine the effects of the amounts of incisal coverage and the types of incisal finish line on the stress distribution in maxillary anterior porcelain laminate veneers under two different loading conditions. Three-dimensional finite element models of a maxillary anterior porcelain veneer with differ-ent amounts of incisal coverage ; 0, 1, 2, and 3mm and different incisal finish lines feathered edge, incisal bevel, reverse bevel and lingual chamfer with various amounts of lingual extension were developed. 300N force was applied at the point 0.5mm cervical of the linguoincisal edge in two loading conditions ; A) 125 degrees, B) 132 degrees. Tensile and compressive stress in ceramic and shear stress in the resin cement layer were analyzed using three-dimensional finite element method. The results were as follows : 1. The types of incisal finish line had more influence on the stress distribution in porcelain laminate veneer than the amounts of incisal coverage. 2. In case of no incisal coverage, incisal beveled laminate exhibited more evenly distributed tensile stress than feathered edged laminate. And in case of incisal coverage, reverse beveled laminate and lingual chamfered laminate with 1mm lingual extension exhibited more evenly distributed tensile stress than lingual chamfered laminates with 2mm and 3mm lingual extension. 3. As long as the lingual chamfer goes, less tensile stress was found at the incisal edge, while much more tensile stress was found at the lingual margin area in proportion to the length of lingual extension. 4. Under 125 degree load, tensile stress in porcelain laminate veneer had increased compared with that under 132 degree load and the difference exhibited by the change of the amount of tooth support was larger. 5. The types of incisal finish line and the distance from the incisal finish line to the loading point had more influence on the shear stress distribution in the resin cement layer than the amounts of incisal coverage. In contrast loading condition had little influence.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.717-726
• /
• 2022

This study was conducted to assess the geochemical contamination degree of As, Cd, Cu, Pb, Sb, and Zn in the soil and water samples from an abandoned gold mine. Enrichment Factor (EF), Geoaccumulation Index (Igeo), and Pollution Load Index (PLI) were carried out to assess the geochemical contamination degree of the soil samples. Variations of sulfate and heavy metals concentration in water samples were determined to identify the geochemical distribution with respect to the distance from the mine tailing dam. Geochemical pollution indices indicated significant contaminated with As, Cd, Pb, and Zn in the soil samples that areas close to the mine tailing dam, while, Sb showed similar indices in all soil samples. These results indicated that the As, Cd, Pb, and Zn dispersion has occurred via anthropogenic sources, such as mining activities. In terms of water samples, anomalies in the concentrations of As, Cd, Zn, and SO₄^2- was determined at specific area, in addition, the concentrations of the elements gradually decreased with distance. This result implies the heavy metals distribution in water has carried out by the weathering of sulfide minerals in the mine tailing and soil. The study area has been conducted the remediation of contaminated soil in the past, however, the geochemical dispersion of heavy metals was supposed to be occurred from the potential contamination source. Therefore, continuous monitoring of the soil and water is necessary after the completion of remediation.

• Korean journal of applied entomology
• /
• v.52 no.3
• /
• pp.243-248
• /
• 2013

This study was conducted to understand the settlement process of Ascotis selenaria larvae into citrus orchards with respect to oviposition site and analysis of the spatial distribution pattern of the larvae. A. selenaria eggs were not found on citrus trees in field and green house, but not on citrus trees in the field. A. selenaria larvae showed a significant clump distribution in the greenhouse. In the open citrus field, the index of dispersion was around 1.0 in most cases, with a weak clumping degree. However, the d-statistic was between -1.96 and 1.96, indicating a statistically significant random distribution. In addition, the Green's index (a clumping index) was very low in all cases, even though the clump distribution was accepted. for most samples, the probability distribution of larval frequency in the field satisfied the probability distribution functions of Poisson (random pattern) and the negative binomial (clump pattern) distribution. In addition, the temporal distribution of the larvae in the open field showed a pattern which was formed by colonizers from outside oviposition sites. Further, the difference in larval spatial distribution between field and greenhouse orchards was discussed.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.12
• /
• pp.1563-1569
• /
• 2000

Objective : Delayed ischemic neurologic deficit(DIND) is one of the major complications following aneurysmal subarachnoid hemorrhage(SAH). However, the correlation between angiographic vasospasm(AV) and DIND after SAH is not precisely known. The authors investigated the timing, incidence, characteristics of DIND, and analyzed correlation between AV and DIND. Patients and Methods : A series of 126 patients with SAH and performed cerebral angiography which, confirmed anterior circulation aneurysm, admitted to between January 1996 to December 1998, were studied retrospectively. A comparative analysis between group 1(G1) in which AV patients presented with DIND, and group 2(G2) patients did not DIND, were done. AV was graded according to location, distribution and degree. Location of vasospasm was classified as basal type(BT), distal type(DT). BT was involved horizontally and include the bilateral carotid systems, proximal middle cerebral artery(MCA) and proximal anterior cerebral artery(ACA). DT was involved vertically and include the MCA branches as they become vertically or posteriorly oriented and the ACA distal to the anterior communicating artery. BT and DT all defined ether as localized type(LT) or combined type(CT). Distribution of vasospasm was classified as type I, type II and type III. Type I represents the involvement of bilateral carotid systems and bilateral anterior cerebral artery, type II was designed as one carotid system without involving anterior cerebral artery, and type III when only some portions of the anterior cerebral artery were involved, bilaterally. Degree of vasospasm was classified as mild(less than 25%), moderate(between 25-50%), severe(greater than 50%), and those were determined by comparing the caliber of the artery in vasospasm to that of the nearest area of apparently normal vessel. Results : The incidence of AV & DIND was 57/126(45.2%), 29/126(23.0%), and timing of DIND was 9 days(${\pm}4.1$) after initial hemorrhage. As for the location, BT was seen in 12 cases(40.0%), DT 11 cases(36.7%) and CT 7 cases (23.3%), respectively. Where as G1, BT was seen 5 cases(18.5%), DT 5 cases(18.5%) and CT 17 cases(63.0%), respectively in G2. CT AV was more correlated with DIND than LT AV(p<0.05). For distribution, type I was seen in 16 cases(59.2%), type II 4 cases(14.8%), type III 7 cases(25.9%) in G1 where as type I was seen in 7 cases(23.3%), type II 10 cases(33.3%), type III 13(43.3%) in G2. Type I AV was well correlated with DIND unlike to type II or type III(p<0.05). As for the degree, mild was seen in 4 cases(14.8%), moderate 14 cases(51.9%), severe 9 cases (33.3%) in G1, and mild 16 cases(18.5%), moderate 11 cases(36.7%) and severe 3 cases(10.0%) in G2. Moderate to severe type AV was well correlated with DIND(p<0.05). Conclusion : These results indicate that it may be possible to predict DIND according to careful analysis of location, distribution, degree of AV in patients with aneurysmal SAH.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.37-46
• /
• 2011

Since the Korean retail industry was made accessible to the big conglomerates and foreign retail companies, local traditional markets have faced serious problems. To sustain the local traditional markets' survival, the Korean government established various remedial policies for addressing, and many scholars published articles to suggest how to find solutions to, the problem. Unfortunately, the results have not been satisfactory. The purpose of this study is to find another way to help the Korean traditional retail market, from the view point of the Green Growth Policy, an initiative designed to address environmentally balanced economic growth in Korea. In order to survive and to maintain sustainable growth, it is incumbent upon retailers in the traditional market to understand the concept of the Green Growth Policy. A survey was conducted as a means of testing the degree of awareness of the Green Growth Policy, as well as determining the relationship between the degree of awareness and the degree of organizational commitment by the retailers in the local traditional markets. Interestingly, we were able to detect some of the features (e.g., they were distinguished by the elderly and the young, as well as low level of education and high level of education) in the traditional market retailers' demographic characteristics. We utilized the analysis of variance (ANOVA) statistical method to simultaneously compare the differences in retailers' demographic characteristics; the results were as follows: Overall, the results showed that the awareness of the Green Growth Policy, the degree of trust in the government's policy, levels of self-efficacy, and levels of organizational commitment were higher with the older traditional market retailers than the younger traditional market retailers. Specifically, the degree of trust in government policies (F=9.964,p < .05), levels of self-efficacy (F=5.532,p < .05), and levels of organizational commitment (F=5.697,p < .05) were statistically significant. Moreover, in the portion of the study that addressed the difference between education levels, all the variables were averaged in the higher education category of the traditional market retailers. Specifically, awareness levels of the Green Growth Policy (F=8.564,p < .005) and levels of self-efficacy (F=6.754,p < .005) were statistically significant. These results revealed that the traditional market retailers' demographic characteristics should be considered important factors in order to realize their policy. The results of the study showed the following: 1) The degree of awareness of the government's Green Growth Policy was statistically significant as it related to traditional market retailers' organizational commitment. 2) The degree of trust of the government's policy was significantly moderated between the awareness of the government's Green Growth Policy and the traditional market retailers' organizational commitment. This result demonstrates that the traditional market retailers' awareness of the government's Green Growth Policy will show more organizational commitment with higher levels of trust of the government's policy. 3) It also revealed that traditional market retailers' self-efficacy was fully mediated between the awareness of the Green Growth Policy of the government and traditional market retailers' organizational commitment. The results suggest that the government should show an interest in showing traditional market retailers how to enhance their traditional markets. Implications and future research directions are also discussed.