• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.1
• /
• pp.3-9
• /
• 2010

Drainage density, defined as the degree to which a landscape is dissected by streams, is a fundamental property of natural terrain that reflect the comprehensive morphologic response of watershed. In this study the spatial variability of drainage density is analyzed by statistical approach to it and its plotting method is proposed. Overland flow length is confirmed to be a highly variable spatial factor from the result of statistical analysis. Distribution map of drainage density based on spatial autocorrelation length in this study would be a superior tool to the classical definition of drainage density.

• Transactions of Materials Processing
• /
• v.8 no.3
• /
• pp.295-295
• /
• 1999

In the present study, the corrosion behavior of AZ91D as-cast alloy was investigated form the viewpoint of the distribution aspect of precipitate ($Mg_{17}Al_{12}$) and the variation of Al concentration in the Mg-rich matrix. The dendrite arm spacing (DAS) of an as-cast specimen was measured as a function of degree which describes the distribution aspect of the precipitate, and the salt spray test was conducted for various grain-sired specimens fur 20 days. The dendrite arm spacing increased as the grain size increased to about 150㎛, but a constant value is indicated when the grain size exceeds that range. Although the relationship between the corrosion rate and grain size is of a nonlinear type, the linear trend between the corrosion rate and the dendrite arm spacing is maintained for the overall range of dendrite arm spacing. Since the precipitate in the as-cast alloy is discontinuously distributed, this linear relationship means that the variation of Al-solute concentration in the Mg-rich matrix has a more potent effect than the protective action of the precipitate on the corrosion behavior of an as-cast alloy.

• Structural Engineering and Mechanics
• /
• v.37 no.2
• /
• pp.131-147
• /
• 2011

The logarithmic decrement method has been long used to estimate damping ratios in systems with only one modal component such as linear single degree of freedom (SDOF) mechanical systems. This paper presents an application of a methodology that uses joint time-frequency distribution (JTFD) as input, instead of the raw signal, to systems with several vibration modes. A most important feature of the present approach is that it can be applied to a system with time-varying damping ratio. Initially the precision and robustness of the method is determined using a synthetic model with multiple harmonic components, one of them displaying a time-varying damping ratio, subsequently the results obtained from experiments with a reduced model are presented. A comparison is made between the results obtained with this methodology and those using the classical technique of Least Squares Complex Exponential Method (LSCE) in order to highlight the advantages of the former, such as, good precision, robustness and excellent performance in extreme cases, e.g., when very low frequency components and time varying damping ratio are present.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.9 no.1
• /
• pp.173-179
• /
• 1996

Hypertropied palatine tonsil is a common disorder in pediatric otolaryngology. It could be easily observed and adenoid vegetation could induce maxillary sinusitis by the obstruction of nasopharynx and choanae. This is a study on the relationship of the hypertropied palatine tonsil, 42cases, with maxillary sinusitis and adenoid vegetation The results was as followings ; 1. The sex distribution was male 30cases($71.4\%$), female 12cases($28.6\%$) and age distribution was from 3 to 17year-old. 2. Hypertropied palatine tonsil distribution was the degree of both 3, 2cases($4.8\%$), one 3 the other 2, 3cases($7.l\%$), both 2, 22cases($52.4\%$), one 2 the other 1, 9cases($21.4\%$), both 1, 5 cases($11.9\%$). and only one 1, 1case($2.3\%$). 3. By the PNS X-ray, there were resulted 29 cases($69.0\%$) both maxillary sintis, 4cases($9.5\%$) only one maxillary sinusitis and 9cases($21.4\%$) norma] sinus. 4. By the Head latera] X-ray, there were resulted 13cases($31.0\%$) large adenoid, 24cases($57.l\%$) mediate adenoid, and 5cases($l1.9\%$) small adenoid.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.19 no.1
• /
• pp.85-107
• /
• 1993

The cosmetic fine powders were mixed with variation of mixing time(5) in the mixers (ribbon mixer, powder mixer, micropulverizer and fine impact mill). The powders were nixed with small amount of ferric oxide. as tracer. The mixed powders ere measured the particle size distribution, specific surface area and surface color with mixing time (s). The color variation, particle size distribution and specific surface area of the mixed powder exist a relationship with mining time(s) that can be expressed as mathematical equations to show the degree of the mixing of the powder mixture. The linear velocity of the impellar tip is the main factor contributing to he mixing efficiency of the mixers un this study. According to the linear velocity, he mixers used are devieded as convection mixing (ribbon mixer), sclera mixing powder mixer) and diffusion mixing (micropulverizer/fine impact mill).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.2
• /
• pp.64-71
• /
• 2000

In order to clarify the characteristics of soot formation and oxidation in-cylinder of a diesel engine, it is necessary to diagnose accurately for combustion of in-cylinder. The past techniques for soot measurement have limitations in providing the characteristics of soot in a diesel engine, whereas, laser-based 2D imaging diagnostics have the potential to provide better temporally and spatially resolved measurements of the soot distribution. We rebuilt an optically accessible diesel engine which is similar to the conditions of a conventional engine and tried to measure soot distribution in a cylinder of the diesel engine using laser induced scattering(LIS) and laser induced incandescence(LII). Some results were acquired in this study. LIS and LII signal that show soot distribution of a in-cylinder were taken by ICCD properly. The signal of LIS was intenser than that of LII. Although they have some differences of signal intensity in early combusion period, both of signals show that they are generally similar in late combustion period, after ATDC 50 degree.

• Journal of Distribution Research
• /
• v.1 no.1
• /
• pp.239-258
• /
• 1996

This study deals with the measurement of relational norms, a safeguard for sustained exchange relationshipsim marketing channel systems. Here, the relational norm items are hypothesized to have a second-order factor model, in which mine observed items originate from the three first-order factors and the first order factors in turn originate from a second-order factor. The three first order construe comprising a higher order norm are mutuality(equity in the distribution of benefits and burdens over the course of the exchange on a long term basis), flexibility(expectation of friendly adaption for possible circumstance changes), and solidarity (the degree to which the preservation of the unique and continuing relationship is internalized by the exchange partners as being important in and of itself). 113 research questionnaires are obtained from four industries such as construction, telecommunication, iron, and electric ＆ electronic industries, Reliability and nomological. discriminant validity are tested, and in using the confirmatory factor analysis of Lisrel 7.16, and the chi-square difference test it is tested which has a better satisfactory fit to the data, the first-order model or the second-order one. The results of this study indicates that relational norms have a second order construct. In the electric and electronic industry the model as a while has a satisfactory fit to the data and the relevant first- and second-order factor loading to the mutuality is not significant. Same Results are happened to the flexibility in the telecommunication industry and to the mutuality and flexibility in the inn industry. In sum, the model lends support to our construct, but it is difficult to apply the measurement model to all kinds of industries.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.162-162
• /
• 2019

Water Distribution Network (WDN) is a critical infrastructure to be maintained ensuring proper water supply to wide-spread consumers. The WDN consists of pipes, valves, pumps and tanks, and these elements interact each other to provide adequate system performance. If elements fail by internal or external interruptions, it may result in adverse impact to water service with different degree depending on the failed element. To determine an appropriate maintenance priority, the critical elements need to be identified and mapped in the network. In order to identify and prioritize the critical elements in WDN, an element-based simulation approach is proposed, in which all the elements composing the WDN are reviewed one at a time. The element-based criticality is measured using several resilience indexes that are newly developed in this study. The proposed resilience indexes are used to quantify the impacts of element failure to water service degradation. Here, three resilience indexes are developed, such as User Demand Severity, Economic Value Loss and Water Age Degradation, each of which intends to measure different aspects of consequences, such as social, economic, and water quality, respectively. For demonstration, the proposed approach is applied to a benchmark water network to identify and prioritize the critical elements.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.274-277
• /
• 2004

Fuel/air mixing in air turbo ramjet(ATR) combustor is a significant parameter of combustion stability and efficiency. In this study, fuel distribution in the ATR model combustor was measured to compare the degree of mixing with respect to the velocity ratio$(r=v_a/v_f)$ between fuel gas and air. Planar laser-induced fluorescence(PLIF) and image processing method were used to obtain two dimensional fuel distribution. Fuel mixing went bad with approaching to r=1.

• Journal of Distribution Science
• /
• v.20 no.2
• /
• pp.91-100
• /
• 2022

Purpose: The sports industry is a major form of leisure and entertainment, but the industry was tremendously affected by the Covid-19 pandemic. This study gives solutions for sports leisure retail stores to the effects of the Covid-19 crisis on consumers' sports products purchasing habits and then gives a logical conclusion regarding the findings of the topic. Research design, data and methodology: Scant research is available to feedback for owners and managers of sports leisure retail stores which elements could be considered to recover their business prior to the pandemic. For achieving this, this study investigated total 284 responses in the retail stores and conducted the ANOVA analysis to compare the level of intensity on the impact Covid 19 pandemic. Results: Our findings suggests that there was a statistically recognizable difference at the significance level of probability between the mean value of the impact index of Covid 19 pandemic and key recovery strategies, indicating the high degree of Covid 19 impact can be reducing by four solutions. Conclusions: Finally, this study concludes the specific entertainment elements that influence the purchasing behavior of consumers will ensure that the Sports industry deals with its internal problems first without necessarily looking at the outside factors such as the pandemic.