• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.95-102
• /
• 2012

This study analyzed the observation characteristics with the subject of observation data through defining the change of the observation degree as attention /conscious observation /visual understanding. Furthermore, by obtaining the formular with which to estimate the subjects' observation amount, this study suggests a potential method for easier analysis of observation characteristics. The conclusions from the study are as the followings. First, the observation frequency was being generated with wide deviation among subjects while there was a flow-on characteristics depending on the degree of observation. These characteristics enabled the study to obtain the formular with which to estimate the observation amount. Second, the study could establish the area frequency by grade from the entire observation data. The area I was at most 4% for the area frequency but accounted for 18.2% of the entire effective observation time, and the area II 16% and 38.7% respectively. Accordingly, only considering the observation area distribution of the area I or the areas I and II shows which position of the space the subjects were observing. Third, with the subject of the relatively higher observation time at at the subject's observation characteristics, as the observation phase was getting higher, the observation time decreased more. Forth, by obtaining the formular to estimate the observation amount for observation data according to the change of observation degree, the study could find the estimating observation characteristics of additional subjects. The formular shortens the analysis time and facilitates the analysis process.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.49-59
• /
• 2004

The concectration and distribution of contaminants obtained from a contaminated land investigation or an environmental geochemistry survey constitutes the basis of a decision-making process on environmental policies or of scientific researches. As the quality of data determines the reliability of the result, the investigation plan should be adjusted according to the purpose of the investigation. In general, the effort to improve the data quality had been focused mainly on the QA/QC procedures in laboratories. The rapid progress of analytical instrument has also contributed toward improving the analytical precision to a sacrificable degree. Nevertheless, in many cases, it is not the analytical precision that needs improvement for the better precision of overall measurement process: it is rather during the sampling process in the field that is responsible for the poor precision. To assess the data quality on a measured value, ISO recommends to provide information on "measurement uncertainty" along with the measured value. The measurement uncertainty in an environmental measurement context can be explained as the statistical number that expresses the degree of the uncertainty stemming from the sampling and analytical procedures. There is a cost involved in order to improve the precision of sampling and analytical methods so as to decrease the degree of measurement uncertainty. The economical point of compromise in an investigation planning can be achieved when the allowable degree of uncertainty has been set before-hand. The investigation can then be planned accordingly not to exceed the uncertainty limit. Furthermore, if the measurement uncertainty estimated from the preliminary investigation can be separated into sampling and analytical uncertainties, it can be used as a criterion where the resources for the investigation should be allotted cost-effectively to reinforce the weakest link of the whole investigation process. This paper aims to present a method of estimating the level of measurement uncertainty of a measured contamination concentration at a site used as an example and to show how the estimated uncertainty can be applied to serve the particular purpose of an investigation.

• Journal of the Korean Society of School Health
• /
• v.23 no.2
• /
• pp.295-307
• /
• 2010

Purpose: This study was conducted to find ways to improve foodservice quality and satisfaction of middle school students in school lunch service. Recognition of concerns about school lunch and quality attributes was evaluated by gender. And we tried to investigate quality attributes which could affect degree of foodservice satisfaction by gender. Methods: Two hundred students from each of 6 middle schools (3 schools in urban and 3 schools in rural) in Gyeonggi Province were surveyed using self-developed questionnaires. Total of 1,103 questionnaires (male 556 and female 547) were collected and data were analyzed using descriptive analysis, t-test, cross table and stepwise multiple regression by SPSS 11.0. Results: There were not significant differences in average importance scores (male 4.09, female 4.06) and average performance scores (male 3.36, female 3.30) of quality attributes between middle school boys and girls. But there were significant differences in 7 and 6 of 25 quality attributes in evaluating importance and performance respectively by gender. There was not a significant difference (male 3.13, female 3.24) in degree of foodservice satisfaction by gender. But there were significant differences in the distribution of satisfaction. Stepwise multiple regression analysis showed that degree of satisfaction was influenced by a taste of food, quick complaint handling, providing favorite foods, and food hygiene in male students (F=$51.1^{***}$, adjusted $R^2$=.265). Degree of satisfaction was influenced by a taste of food, providing favorite food, proper meal prices, providing a wide variety of food in female students (F=$91.4^{***}$, adjusted $R^2$=.399). Conclusion: We found out that there were significant differences in quality attributes when evaluating importance and performance and in quality attributes which could affect foodservice satisfaction by gender.

• Journal of the Korean Society for information Management
• /
• v.29 no.2
• /
• pp.193-204
• /
• 2012

The characteristics of citation and centrality measures in citation networks can be identified using multiple linear regression analyses. In this study, we examine the relationships between bibliometric indices and centrality measures in an article-level co-citation network to determine whether the linear model is the best fitting model and to suggest the necessity of data transformation in the analysis. 703 highly cited articles in Physics published in 2004 were sampled, and four indicators were developed as variables in this study: citation counts, degree centrality, closeness centrality, and betweenness centrality in the co-citation network. As a result, the relationship pattern between citation counts and degree centrality in a co-citation network fits a non-linear rather than linear model. Also, the relationship between degree and closeness centrality measures, or that between degree and betweenness centrality measures, can be better explained by non-linear models than by a linear model. It may be controversial, however, to choose non-linear models as the best-fitting for the relationship between closeness and betweenness centrality measures, as this result implies that data transformation may be a necessary step for inferential statistics.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.5
• /
• pp.83-93
• /
• 2012

This study is to perform the effect of urbanization in urban and suburban districts, and to identify regional characters of climate according to the analysis of slope at rise, and descent of temperature and globe temperature, correlation between seasonal temperature analysis, and calculation of degree hour. According to this study, the result is summarized as follows. (1) The average temperature, rated from high to low, consists of residential area, Daegu weather station, intracity, green belt, water-front green belt, and suburban. (2) At the rise and descent of temperature, the result of the slope change of in each point may be one of the useful indexes to be able to perform the regional unique thermal characteristic, including the seasonal urbanization. (3) Although there is a difference between the surface of the earth and ambient environment. The result of the correlation of temperature between summer and winter is that temperature slope in urban districts was higher than in suburban districts, and the difference of slope was unvaried among the four observations in the same city region. (4) To show objectively, regional thermal characteristics in urban and suburban districts, the exponentiation of winter degree hour and summer degree hours were checked. The result of the exponentiation is that the more artificial a region, the lower index.

• Journal of the Korean housing association
• /
• v.3 no.2
• /
• pp.75-88
• /
• 1992

The purpose of this study is to analyze the relations between the conditions of the flaws and the types of damage according to the characteristics of housing, and then to provide with some basic data for the construction of houses of good quality. The effective analytic data for this research are 558 of all 700 questionnaires gathered through distribution collection and personal interviews conducted from June 22, 1992 Through to July 6, towards the first occupants in apartment houses, tenement houses, multidetached houses, multifamily houses and detached houses that last 10 years after construction, located in Seoul and Kyungki-Do. Our major findings are as under:1) Our data reveal that the ratio of flaw occurrence by general type breaks down into noise 53.7%, crack 39.3%, dew condensation 36.9%, windows and doors 36.6%, structure and frame 35.3%, built-in materials 33.3%, the inferiority of equipments/facilities 29.0%, ill drainage 22.0%, and the leakage of water 19.3% average number of flaw occurrence, multi detached house is the highest as 13.7, apartment house 10.5, tenement house 10.5, detached house 10.51 and multifamily house 8.7.3) As regards the degree of flaw occurrence, the flaw of noise is as serious in the degree of occurence as it is high in the ratio of occurrence. Particularly, the following contrastive phenomena are found: multidetached house is normal (2.0) in the degree of occurrence but it is high in the ratio of occurrence: while multifamily house is 2.9 in the degree of occurrence but it is low in the ratio of occurrence.4) In view of the relations between the types of flaws and those of damage, the flaw type which significantly influences on the injury of spirit and health is built-in materials; the flaw types that have considerable effect on the damage of house and home life are the inferiority of equipments/facilities, due condensation, and inferior windows and doors; and the flaw types that have a bad influence over the reliance on the constructors are the inferiority of equipments/facilities, due condensation and built-in materials.

• Journal of the Korean earth science society
• /
• v.21 no.2
• /
• pp.159-167
• /
• 2000

We tested the randomness and estimated the degree of concentration for the earthquake occurrence in the Korean Peninsula by using the statistical methods for spatial data. For the randomness test, we applied both of the test statistics based method and the empirical distribution based method to the both of historical and instrumental seismicity data. It was found that the earthquake occurrences for historical and instrumental seismicity data are not random and clustered rather than scattered. A nonparametric density estimation method was used to estimate the concentration degree in the Peninsula. The earthquake occurrences show relatively high concentration on Seoul, Choongnam, Chonbook and Kyungbook areas for the historical seismicity data. Also,'L" shaped concentrations connecting Whanghaedo -the coast of Choongnam -the inland of Kyungbook area are revealed for the instrumental seismicity data.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.4
• /
• pp.659-669
• /
• 2009

Objectives : The degree of depression in dental hygienist was analyzed to reveal the various factors related to them. Methods : The self-administered questionnaires were filled out from 202 dental hygienist in Daejeon City. The survey items included subjects' socio-demographic and job-related characteristics, health-related behaviors, depression. Chi-Square analysis and Pearson's correlation coefficient was put into survey results, in which a degree of depression was dependent variable and others were independent variable. Results : 1. The distribution for depression degree has shown the rate as 80.2% in normal range group and 19.8% in depression group. 2. As for depression, long working hours(p=0.042), poor sense satisfaction in work(p=0.000), not fit to the job(p=0.003), low personal relation with peer works or supervisors(p=0.039), without alcohol drinking(p=0.048), poor subjective condition of health(p=0.000) than their respective counterparts. 3. Concerning correlation between depression and various factors, poor sense satisfaction in work(r=-0.332, p=0.000), not fit to the job(r=-0.353, p=0.000), low personal relation with peer works or supervisors(r=-0.215, p=0.002), without alcohol drinking(r=-0183, p=0.009), poor subjective condition of health(r=-0.333, p=0.000). Conclusions : These results showed that depression state could be influenced by various factors, which include socio-demographic, job-related characteristics and health-related behaviors. Therefore, in order to reduce depression state of dental hygienists, development and application of programs to manage and research for them are required to be revitalized as well as socio-demographic and job-related characteristics and health-related behaviors.

• Journal of Fashion Business
• /
• v.10 no.4
• /
• pp.130-139
• /
• 2006

This study was conducted to survey and analyze the preference, and acceptance of smart clothing to the consumers with different age. A questionnaire with the objects of 530 consumers from the teens to the forties, in order to utilize the characteristics of consumers as basic materials for the planning of smart clothing, which is reasonably designed to have both of function and fashion, by checking the characteristics of consumers. The results are as follows; 1. The interest degree of fashion was the highest in the 20's and the acceptance degree showed the medial frequency in all age groups. In terms of the analysis result regarding general persons and professionals, professionals showed higher frequency distribution in both interest degree and acceptance degree than general persons. 2. When a comparison for each age, general person, and professional was made, more than the majority of all could not recognize the terms and concept about the smart clothing, but in terms of the favorable impression, more than the majority answered that it interests them. 3. More than the majority of the objects of this survey responded that they have a purchase intention and in terms of the desired purchase price, the price below 500,000 won showed the most frequency. In terms of the reason of wearing the smart clothing, they responded that they can select needed functions, and in terms of an occurring problem, they answered that it is the high cost of economic burdens.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.95-104
• /
• 2014

PURPOSES : The purpose of this study is to evaluate the degree of restraint (DOR) of longitudinal steel at continuously reinforced concrete pavement (CRCP) against environmental loadings. METHODS : To measure the longitudinal steel strain, 3-electrical resistance and self-temperature compensation gauges were installed to CRCP test section (thickness = 250mm, steel ratio = 0.7%) and continuously measured 10 min. intervals during 259 days. In order to properly analyze the steel strains first, temperature compensation process has been conducted. Secondly, measured steel strains were divided into 12 phases with different events such as before paving, during concrete hardening, and after first cracking, etc. RESULTS : Thermal strain rate (TSR) concept is defined as the linear strain variations with temperature changes and restraints rate of longitudinal steel against environmental loadings (especially thermal loading) with different cases is defined as degree of restraint(DOR). New concept of DOR could be indirect indicator of crack width behaviors of CRCP. CONCLUSIONS : Before paving, DOR of longitudinal steel is almost same at the coefficient of thermal expansion of steel ($12.44m/m/^{\circ}C$) because of no restraint boundary condition. After concrete pouring, DOR is gradually changed into -1 due to concrete stiffness developing with hydration. After first cracking at crack induced area, values of DOR are around -3~-5. The negative DOR stands for the crack width behavior instead of steel strain behavior. During winter season, DOR reached to -5.77 as the highest, but spring this values gradually reduced as -1.7 as the lowest. Based on this observation, we can presume crack width decreased over time within the time frame of this study. This finding is not consistent with the current theory on crack width variations over time, so further study is necessary to identify the causes of crack width reducing. One of the reasons could be related to concrete stress re-distribution and stress relaxation.