• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.1
• /
• pp.82-93
• /
• 2002

The effects of the interaction between the flow and temperature field and a boundary layer due to a variety of the height of a vortex generator are experimentally investigated. The test facility consists of a boundary-layer wind tunnel with the vortex generator protruding from the bottom surface. In order to control the strength of the longitudinal vortices, the angle of attack and the spacing distance of the vortex generator are 20 degree and 40 mm, respectively. The height of the vortex generator (H) is 15 mm, 20 mm and 30 mm and the cord length of it is 50 mm. Three-component mean velocity measurements are made using a 5-hole probe system and the surface temperature distribution is measured by the hue capturing method using thermochromatic liquid crystals. By using the method mentioned above, the following conclusions are obtained from the present experiment. The boundary layer is thinned in the downwash region where the strong downflow and the lateral outflow of the boundary layer fluid occur and thickened in the upwash re,3ion where the longitudinal vortex sweeps low momentum fluid away from the bottom surface. In case that the height of the vortex generator increases, the averaged circulation and the maximum vorticity of the vortex pair decrease. The contours of the non-dimensional temperature show the similar trends fur all the cases (H=15 mm, 20 mm and 30 mm). The peak augmentation of the distribution of the local non-dimensional temperature occurs in the downwash region near the point of minimum boundary-layer thickness.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.726-728
• /
• 2013

Optoelectronic arc discharge sensor was used to detect arc discharge inside power distribution panel. Arc discharge is fatal to power system once it begins, thus preventive detection is necessary before power failure occurs. Optoelectronic detection method was used to avoid direct electrical contact to power apparatus inside power distribution panel. 180 degree detection angle and detection range far exceeding 6m, which was sufficient for monitoring purpose, was achieved using the photodiode having $7.5mm^2$ of active surface area and flash source with $0.4cal/cm^2$ energy density, which is equivalent to 1.9J with $2.16cm^2$ emitting area. The response speed of arc discharge sensor was measured to be below 1 msec. The above optoelectronic arc discharge sensor was measured to be sensitive enough to detect 0.94 pC charge.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.1
• /
• pp.105-111
• /
• 2012

The purpose of this study was to investigate the effect that difference in forefoot of shoe flexibility during the quick lunge from a jump smashing on the lower limbs and the plantar pressure distribution. For this 10 elite badminton players with over 10 years experience and right handed participated. Two kinds of badminton shoes were selected and tested mechanical testing for the forefoot flexibility. Motion analysis, ground reaction forces and plantar pressure distribution were recorded. It was required to conduct lunge movement after jumping smashing as possible as high. Photo sensor was located in 3 meter away from standing position and its height was 40 cm. Subjects were conducted to return original position after touching the sensor as under clear movement as possible as fast. Forefoot stiffness had an effect on shoe peak bending degree and peak bending angular velocity in propulsion phase. Forefoot flexibility had an effect on ankle plantar flexion and knee flexion moment. It appears that joint power on lower limb and peak plantar pressure were not influenced by the flexibility of shoes.

• Journal of the Korean Society of Tobacco Science
• /
• v.24 no.1
• /
• pp.38-45
• /
• 2002

This study was conducted to determine the smoke component concentration and the smoke distribution in the cambridge filter pad and cigarette filter with stalk position and grade of Korean leaf tobaccos. 12 grades of flue-cured and burley leaf tobaccos which were taken from the Kim-cheon and Ock-cheon leaf tobacco processing factory were used for this study. Six kinds of smoke components such as tar, nicotine, water, carbon monoxide(CO), carbon dioxide($CO_2$) puff No. collected in the cambridge filter pad and cigarette filter were analyzed. Also, nicotine/tar, CO/tar ratio were calculated from the analytical data. Puff no., CO, and $CO_2$ concentration of flue-cured and burley tobacco leaves at high stalk position were higher than those of low stalk position, and these components were increased in high grade of leaf tobacco. Compared with flue-cured tobacco, burley tobacco showed a little values of puff no., nicotine, and tar concentration. The pH range of burley tobaccos was broader than that of flue-cured tobaccos, and the ammonia concentration of burley tobaccos was significantly higher than that of flue-cured tobaccos. The pH value and ammonia concentration of burley tobaccos were decreased as stalk position of leaf tobaccos decreased. The distribution of smoke components collected in the cambridge filter pad and cigarette filter was different with a different grade and stalk position of tobacco leaves. In high stalk position of tobacco leaves, the portion of smoke components collected in the cambridge filter pad was also increased. The average nicotine, water, and tar removal efficiency by a cigarette filter in a flue-cured tobacco were 37%, 64%, and 48%, respectively. Compared with flue-cured tobaccos, smoke components of burley tobaccos had high nicotine and low water removal efficiency by a cigarette filter. The average ratio of nicotine/tar and CO/tar of flue-cured tobaccos and burley tobaccos were 0.097, 1.22, 0.094, and 0.97, in order. Nicotine/tar ratio was decreased and CO/tar ratio was increased in low stalk position.

• 한국해양학회지
• /
• v.21 no.4
• /
• pp.236-244
• /
• 1986

This study was carried out for appreciable information on the proper habitats and feeding modes of some dominant polychaetes in the continental shelf of the East Sea during April, 1985. Among 95 polychaete species, we select ed 9 dominant species in terms of their occurring frequency, abundance and population density. These are Terebellides stroemi, Chaetozone setosa, Magelona japonica, Ampharete arctica, Aglaophamus sinensis, Nothria holobranchiata, Lumbrineris japonica, Myriochele gracilis, Notoproctus pacificus. Major food item s of these species are centric diatoms and detritus. The feeding modes of the the m are mainly surtace or subsurface deposit feeding, though two specters, M.holobranchiata and L. japonica, could be assumed to be potential carnivores. To a certain degree, most deposit feeders in the coarse sediments showed selectivity in feeding and tube building. The feeding mode, gut content and the tube structure, and the distribution pattern of dominant polychaetes correspond well with the habitat tharacters, e.g.the bottom topography, the source of food and the sediment composition.

• Economic and Environmental Geology
• /
• v.53 no.4
• /
• pp.425-440
• /
• 2020

The study area is located in the southern part of the M'aider Paleozoic basin in the Moroccan Eastern Anti-Atlas. It is an arid region, characterized by minimal vegetation cover, which can provide an ideal environment to apply remote sensing. In this study, remote sensing and field investigations were integrated for lithological and structural lineaments mapping. The Landsat 8 OLI data were processed in order to understand the role of lithology and geological structures in the distribution of mineral deposits in the study area. To achieve this purpose, the Color Composite (CC), the Principal Component Analysis (PCA) and Band Rationing transformation (BR) tests were performed. The results of remote sensing techniques coupled with field investigations have shown that the zones of high lineaments densities are highly correlated with the occurrences of barite mineralization. These findings depict a spatial relationship between structural lineaments and the mineralization distribution zones. Therefore, the barite and Iron oxides mineralization veins, which occur mainly in the Ras Kammouna district, seem to have a structural control. The methodological approach used in this study examining lithological mapping and lineament extractions can be used to explore mineral deposits in arid regions to a high degree of efficiency.

• Journal of Environmental Impact Assessment
• /
• v.19 no.4
• /
• pp.397-407
• /
• 2010

The increase of the solar reradiation from urban areas relative to suburban due to urbanization heats up the air temperature in urban areas and this is called the urban heat island (UHI) effect. This UHI effect has a positive relationship with the degree of urbanization. Through the studies on UHI using the satellite imagery, the effect of the surface heat radiation was observed by verifying the relationship between the air temperature and the land cover types (surface materials such as urban, vegetation, etc.). In this study, however, the surface temperature distribution was studied in terms of land use types for Seoul. Using land use types, the surface temperature in urban areas such as residential, industrial, and commercial areas in Yeongdeungpo, highly packed with industrial and residential buildings, was maximum $6^{\circ}C$ higher than in the bare ground, which indicated that the surface temperature reflected the pattern of the human-consumed energy on the areas and showed that one of the important causes influencing the air temperature except the surface heat reradiation by the sun is the anthropogenic heat. Also, the effect due to the restoration of the Chunggae stream on UHI was investigated. The average surface temperature for the Chunggae stream was reduced about $0.4^{\circ}C$ after restoration. Considering that each satellite image pixel includes mixture of several materials such as concrete and asphalt, the average surface temperature might be much lower locally reducing UHI near the stream.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.10
• /
• pp.4060-4079
• /
• 2020

Blur is an important type of image distortion. How to evaluate the quality of blurred image accurately and efficiently is a research hotspot in the field of image processing in recent years. Inspired by the multi-scale perceptual characteristics of the human visual system (HVS), this paper presents a no-reference image blur/sharpness assessment method based on multi-scale local features in the spatial domain. First, considering various content has different sensitivity to blur distortion, the image is divided into smooth, edge, and texture regions in blocks. Then, the Gaussian scale space of the image is constructed, and the categorized contrast features between the original image and the Gaussian scale space images are calculated to express the blur degree of different image contents. To simulate the impact of viewing distance on blur distortion, the distribution characteristics of local maximum gradient of multi-resolution images were also calculated in the spatial domain. Finally, the image blur assessment model is obtained by fusing all features and learning the mapping from features to quality scores by support vector regression (SVR). Performance of the proposed method is evaluated on four synthetically blurred databases and one real blurred database. The experimental results demonstrate that our method can produce quality scores more consistent with subjective evaluations than other methods, especially for real burred images.

• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.335-341
• /
• 2012

Purpose: While an unmanned helicopter has been extensively used for spraying chemicals on agricultural crops, its low utilization (two months per year from July to August) has recently become an issue. This study aimed to increase the utilization of the unmanned helicopter. The centrifugal rice seeder, a mounting device for rice seeding for unmanned helicopter was developed and assessed its performance. Methods: The concept of the centrifugal spraying device was to obtain design criteria for centrifugal distribution. Four types of blade shapes namely straight, curved, straight wing and curved wing were developed and used. The rotational speed of the blades was tested at 1,000, 1,200 and 1,400 rpm. Results: The blade shapes, rotational blade speed and angle of trajectory were theoretically analyzed and results were validated with a series of laboratory experiments. Conclusions: The curved wing blades provided the distribution uniformity (DU) at 1,200rpm of rotational speed and 60 degree of seed drop point. The spray uniformity of 4.2% was also achieved.

• Journal of Environmental Impact Assessment
• /
• v.29 no.1
• /
• pp.37-44
• /
• 2020

In this study, we analyzed the value of Chl-a by histogram to classify the points where algal management is required. The degree of algal bloom by point was analyzed using the ogive curve, and the algal control points were classified into three stages according to the shape of the frequency distribution table. Of the four major rivers, low concentration of Chl-a appeared most frequently in the Han River, while the high concentration of Chl-a was frequently found at the points of the Geum and the Yeongsan Rivers. In the case of the Han River, no apprehensive areas were found thatrequire intensive management, while most points on the Geum and the Yeongsan Rivers required algal management. Finally, the Nakdong River basin was identified as points requiring algal management from the mid to downstream. The results of this study have confirmation of the possibility that the frequency distribution could be used as a supplementary indicator to express the algal bloom.