• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.1
• /
• pp.20-33
• /
• 2002

Usage of ATM AAL2 packets becomes dominant to increase transmission efficiency of voice traffic in the backbone network. In case of voice service that uses AAL2 mechanism, if resources of network are enough, connection of new call is accepted. However, due to packets generated by the new call, transmission delay of packets from old calls can increase sharply. To control this behavior, in this paper we present an AAL2 buffer management scheme that allocates a virtual buffer to each call and after calculating its propagation delay variation(PDV), decides to drop packets coming from each call according to the PDV value. We show that this packet dropping algorithm can effectively prevent abrupt QoS degradation of old calls. To do this, we analyze AAL2 packet composition process to find a critical factor in the process that influences the end-to-end delay behavior and model the process by K-policy M/D/1 queueing system and MIN(K, Tc)-policy M/D/1 queueing system. From the mathematical model, we derive the probability generating function of AAL2 packets in the buffer and mean waiting time of packets in the AAL2 buffer. Analytical results show that the AAL2 packet dropping algorithm can provide stable AAL2 packetization delay and ATM cell generation time even if the number of voice sources increases dramatically. Finally we compare the analytical result to simulation data obtained by using the COMNET Ⅲ package.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.9
• /
• pp.15-22
• /
• 2000

The effects of carrier transport and input power on the extinction ratio was theoretically analyzed in a 1.55${\mu}m$ InGaAsP/InGaAsP multiple-quantum-well(MQW) electroabsorption(EA) modulator. Poisson's equation, current continuity equations for electrons and holes, and optical field distribution were self-consistently solved by considering electric field dependent absorption coefficients. The field screening effect due to the carrier accumulation in heterointerface and the space-charge region occurred more seriously at the input side of modulator as input optical intensity increased. It was revealed that extinction ratio could be steeply degraded for modulator with the length of 200${\mu}m$ when an input power exceeds 10mW. A degradation of extinction ratio due to the field screening effect would be more significantly at high-performance devices such as a 1.55${\mu}m$DFB-LD/EA-modulator integrated source where optical coupling efficiency is almost complete or a very high-speed modulator with its length as short as a few tens ${\mu}m$.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.4 s.310
• /
• pp.74-86
• /
• 2006

This paper proposes a robust and computationally efficient algorithm for automatic video object segmentation. For implementing the spatio-temporal segmentation, which aims for efficient combination of the motion segmentation and the color segmentation, an SOM-based hierarchical clustering method in which the segmentation process is regarded as clustering of feature vectors is employed. As results, problems of high computational complexity which required for obtaining exact segmentation results in conventional video object segmentation methods, and the performance degradation due to noise are significantly reduced. A measure of motion vector reliability which employs MRF-based MAP estimation scheme has been introduced to minimize the influence from the motion estimation error. In addition, a noise elimination scheme based on the motion reliability histogram and a clustering validity index for automatically identifying the number of objects in the scene have been applied. A cross projection method for effective object tracking and a dynamic memory to maintain temporal coherency have been introduced as well. A set of experiments has been conducted over several video sequences to evaluate the proposed algorithm, and the efficiency in terms of computational complexity, robustness from noise, and higher segmentation accuracy of the proposed algorithm have been proved.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.28-37
• /
• 2017

Multipath TCP (MPTCP), which is a layer 4 protocol that can get the reliability and the efficiency of the transmission by using multipath transfer, was standardized by the IETF. MPTCP provides superior performance when compared to a single TCP when used in a homogeneous network with similar network characteristics. However, MPTCP degrades performance when used in heterogeneous networks with different network characteristics. In this paper, we propose 'Delay-alerted path-blocking scheduler'. It measures the delay of each path and blocks the path with a long delay to reduce the order of packets in the receive buffer. If the duplicated packet is sent to the blocked path to measure the delay and the congestion on the blocking path is reduced, the blocked path is unblocked. For performance analysis, the proposed scheduler was implemented in the Linux kernel and improved performance was obtained in the test bed. We also confirmed that the proposed scheduler reduces the degradation of MPTCP performance in real wireless networks with heterogeneous path characteristics.

• Korean Journal of Agricultural Science
• /
• v.22 no.1
• /
• pp.42-48
• /
• 1995

With the aim to investigation of decay resistance and optimum concentration in chrome-copper-arsenic(CCA) preservative treatment on the imported softwoods from Siberia and North america, preservative absorption after CCA impregnation, weight losses and degradation patterns by decay fungi were examined. The density and latewood rate of Siberia softwoods(Spruce and Larch) were higher than those of North america softwoods(Douglas-fir and Western hemlock), resulting in the decrease of the CCA preservative absorption in the Siberia softwoods. In the case of untreated softwoods, decay resistance against Coriolus versicolor was lower than against Tyromyces palustris. For CCA treated softwoods, preservative effectiveness increased with increase in concentration of CCA solution. When treated with 0.7% CCA solution, efficiency value was more than 80 and 90 for C. versicolor and T. palustris, respectively. From this results, in the CCA preservative treatment for imported softwoods, it can be concluded that optimum concentration of CCA solution is approximately 0.7%. The absorption of CCA preservative distributed in the range of 3.8 and $5.5kg/m^3$. After exposure to testing fungi, in the untreated softwoods, bore holes formed in the cell walls and bordered pits, moreover, bordered pit canals enlarged by the fungi. However, 0.5% CCA treated softwoods was almost no deterioration in the cell walls and bordered pits due to decay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6C
• /
• pp.544-561
• /
• 2002

In this paper, we propose a new hybrid type of the routing protocol (Virtual Cluster-based Routing Protocol: VCRP) for mobile ad-hoc networks, based on a virtual cluster, which is defined as a narrow-sense network to exchange the basic information related to the routing among the adjacent nodes. This particular approach combines advantage of proactive routing protocol (PRP), which immediately provides the route collecting the network-wide topological and metric information, with that of reactive routing protocol, which relies on the route query packet to collect the route information on its way to the destination without exchanging any information between nodes. Furthermore, it also provides the back-up route as a byproduct, along with the optimal route, which leads to the VCBRP (Virtual Cluster-based Routing Protocol with Backup Route) establishing the alternative route immediately after a network topology is changed due to degradation of link quality and terminal mobility, Our simulation studies have shown that the proposed routing protocols are robust against dynamics of network topology while improving the performances of packet transfer delay, link failure ratio, and throughput over those of the existing routing protocols without much compromising the control overhead efficiency.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.1
• /
• pp.91-99
• /
• 2008

A multilayer tower-type photoreactor, in which $TiO_2$-coated glass-tubes were installed, was used to measure the vapor-phase BTEX removal efficiencies by ozone oxidation ($O_3$/UV), photocatalytic oxidation ($TiO_2$/UV) and the combination of ozone and photocatalytic oxidation ($O_3/TiO_2$/UV) process, respectively. The experiments were conducted under various relative humidities, temperatures, ozone concentrations, gas flow rates and BTEX concentrations. As a result, the BTEX removal efficiency and the oxidation rate by $O_3/TiO_2$/UV system were highest, compared to $O_3$/UV and $TiO_2$/UV system. The $O_3/TiO_2$/UV system accelerated the low oxidation rate of low-concentration organic compounds and removed organic compounds to a large extent in a fixed volume of reactor in a short time. Therefore, $O_3/TiO_2$/UV system as a superimposed oxidation technology was developed to efficiently and economically treat refractory VOCs. Also, this study demonstrated feasibility of a technology to scale up a photoreactor from lab-scale to pilot-scale, which uses (i) a separated light-source chamber and a light distribution system, (ii) catalyst fixing to glass-tube media, and (iii) unit connection in series and/or parallel. The experimental results from $O_3/TiO_2$/UV system showed that (i) the highest BTEX removal efficiencies were obtained under relative humidity ranging from 50 to 55% and temperature ranging from 40 to $50^{\circ}C$, and (ii) the removal efficiencies linearly increased with ozone dosage and decreased with gas flow rate. When applying Langmuir-Hinshelwood model to $TiO_2$/UV and $O_3/TiO_2$/UV system, reaction rate constant for $O_3/TiO_2$/UV system was larger than that for $TiO_2$/UV system, however, it was found that adsorption constant for $O_3/TiO_2$/UV system was smaller than that for $TiO_2$/UV system due to competitive adsorption between organics and ozone.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.556-563
• /
• 2007

We carried out a laboratory scale experiment about the characteristics of chemically active species produced in hybrid gas-liquid discharges. The electrode configuration which had high voltage electrode in the gas phase and ground electrode in the liquid was utilized while high voltage electrode has been typically positioned in the liquid in other studies. Our electrode was configured in such a way as to increase the energy efficiency of chemical reactions by creating a higher electrical field strength and a narrower pulse width than the typical electrode configuration. The highest ozone concentration was obtained at 45 kV which was the medium value in operating voltages. The decrease of solution conductivity increased the resistance of liquid phase and the electric field strength through the gas phase, so ozone gene-ration rate was enhanced. The increase of voltage promoted the production rate of hydrogen peroxide by increasing the electric field strength. In a lower voltage, the increase of solution conductivity increased the degradation rate of $H_2O_2$, so the $H_2O_2$ generation rate decreased. On the other hand, the effects of UV radiation, shock waves etc. increased the $H_2O_2$ generation rate as the solution conductivity increased. A higher rate of $H_2O_2$ generation can be achieved by mixing argon to oxygen which generates a stronger and more stable discharges.

• Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.131-135
• /
• 2008

In this study, Fe(VI) was employed as a multi-functional agent to treat the simulated industrial wastewater contaminated with Cu(II)-EDTA through oxidation of EDTA, decomplexation of Cu(II)-EDTA and subsequent removal of free copper through precipitation. The decomplexation of $10^{-4}\;M$ Cu(II)-EDTA species was performed as a function of pH at excess concentration of Fe(VI). It was noted that the acidic conditions favor the decomplexation of Cu(II)-EDTA as the decomplxation was almost 100% up to pH 6.5, while it was only 35% at pH 9.9. The enhanced degradation of Cu(II)-EDTA with decreasing the pH could be explained by the different speciation of Fe(VI). $HFeO_4^-$ and $H_2FeO_4$, which are relatively more reactive than the unprotonated species $FeO_4^{2-}$, are predominant species below neutral pH. It was noted that the decomplexation reaction is extremely fast and within 5 to10 min of contact, 100% of Cu(II)-EDTA was decomplexed at pH 4.0. However, at higher pH (i.e., pH 10.0) the decomplexation process was relatively slow and it was observed that even after 180 min of contact, maximum ca 37% of Cu(II)-EDTA was decomplexed. In order to discuss the kinetics of the decomplexation of Cu(II)-EDTA, the data was slightly fitted better for the second order rate reaction than the first order rate reaction in the excess of Fe(VI) concentration. On the other hand, the removal efficiency of free Cu(II) ions was also obtained at pH 4.0 and 10.0. It was probably removed through adsorption/coagulation with the reduced iron i.e., Fe(III). The removal of total Cu(II) was rapid at pH 4.0 whereas, it was slow at pH 10.0. Although the decomplexation was 100% at lower pH, the removal of free Cu(II) was relatively slow. This result may be explicable due to the reason that at lower pH values the adsorption/coagulation capacity of Fe(III) is greatly retarded. On the other hand, at higher pH values the decomplexation of Cu(II)-EDTA was partial, hence, slower Cu(II) removal was occurred.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.2
• /
• pp.144-150
• /
• 2013

Hybrid ceramic membrane (HCM) processes that combined ozonation with a ceramic membrane (CM) or a reactive ceramic membrane (RM), an iron oxide nanoparticles (IONs) incorporated-CM were investigated for membrane fouling control. Alumina disc type microfiltration and ultrafiltration membranes doped with IONs by sintering method were tested under varying mass fraction of IONs. Scanning electron microscope (SEM) images showed that IONs were well-doped on the CM surface and doped IONs were approximately 50 nm in size. Change in the pure water permeability of RM was negligible compared to that of CM. These results indicate that IONs incorporation onto CM had little effect on CM performance in terms of the flux. Natural organic matter (NOM) fouling and fouling recovery patterns during HCM processes confirmed that the RM-ozonation process enhanced the destruction of NOM and reduced the extent of fouling more than the CM-ozonation process by hydroxyl radical formation in the presence of IONs on RM. In addition, analyses of NOM in the feed water and the permeate showed that the efficiency of membrane fouling control results from the NOM degradation during HCM processes; leading to removal and transformation of relatively high contents of aromatic, high molecular weight and hydrophobic NOM fractions.