• Title/Summary/Keyword: degradation and damage

Search Result 692, Processing Time 0.028 seconds

Crack Control of Flexure-Dominant Reinforced Concrete Beams Repaired with Strain-Hardening Cement Composite (SHCC) Materials (변형경화형 시멘트 복합체를 활용한 휨항복형 철근콘크리트 보의 균열제어)

  • Cha, Jun-Ho;Park, Wan-Shin;Lee, Young-Oh;Kim, Sun-Woo;Yun, Hyun-Do
    • Journal of the Korea Concrete Institute
    • /
    • v.23 no.1
    • /
    • pp.109-120
    • /
    • 2011
  • This paper presents an experimental study results on the crack control of flexure-dominant reinforced concrete beams repaired with strain-hardening cement composite (SHCC). Five RC beams were fabricated and tested until failure. One unrepaired RC beam was a control specimen (CBN) and remaining four speciemens were repaired with SHCC materials. The test parameters included two types of SHCC matrix ductility and two types of repair method (patching and layering). Test results demonstrated that RC beams repaired with SHCC showed no concrete crushing or spalling until final failure, but numerous hair cracks were observed. The control specimen CBN failed due to crushing. It is important to note that SHCC matrix can improve crack-damage mitigation and flexural behavior of RC beams such as flexural strength, post peak ductility, and energy dissipation capacity. In the perspective of crack width, crack widths in RC beams repaired with SHCC had far smaller crack width than the control specimen CBN under the same deflection. Especially, the specimens repaired with SHCC of PVA0.75%+PE0.75% showed a high durability and ductility. The crack width indicates the residual capacity of the beam since SHCC matrix can delay residual capacity degradation of the RC beams.

Modeling for the fate of Organic Chemicals in a Multi-media Environment Using MUSEM (다매체 환경 모델 MUSEM을 이용한 유해화학물질의 환경거동예측 모델링)

  • Roh, Kyong-Joon;Kim, Dong-Myung
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.10 no.4
    • /
    • pp.201-210
    • /
    • 2007
  • Pollution by chemical substances such as POPs, EDCs and PBTs in the ecosystem has become more complex and varied, increasing the possibility of irreversible damage to human health or the ecosystem. It is necessary to have a exposure assessment in a multi-media environment for various chemical substances is required for efficient management. This study applied MUSEM(Multi-media Simplebox-systems Environmental Model), a multimedia environmental model that can simultaneously evaluate the possibility of exposure of hundreds of chemical substances in order to efficiently manage chemical substances that can have negative impact on human health or ecological environment through environmental contamination. MUSEM executed the modeling for Japan by setting all 47 prefectures of japan as the regional area for 62 chemical substances and the rest of the territory of japan, excluding regional area, as the continental area and made the estimation of concentration among environment media in each administrative area and made the sensitivity analysis on Tokyo area. The results of simulation for chemical distribution showed that most of the target chemicals located in water region. The result of sensitivity analysis for octanol-water partition rate showed that the concentration change of soil in urban/industrial area and sediment in freshwater was high. In the case of sensitivity analysis for degradation rate showed that the concentration change of freshwater, soil in urban/industrial area, and sediment in freshwater was high.

  • PDF

Protective Effect of Betula Platyphylla on Ultraviolet B-irradiated HaCaT Keratinocytes (화피(樺皮) 에탄올 추출물의 Ultraviolet B로 자극한 피부 각질 세포 보호 작용)

  • Hag Soon Choi;Hyun Joo Kim;Hark Song Lee;Seung Won Paik;Ji Eun Kim;Yung Sun Song
    • The Journal of Korean Medicine
    • /
    • v.44 no.2
    • /
    • pp.119-131
    • /
    • 2023
  • Objectives: Betula Platyphylla(BP) has been used as a analgesic, anti-microbial, anti-oxidant drug in Eastern Asia. However, it is still unknown whether BP ethanol extract could exhibit the inhibitory activities against ultraviolet B(UVB)-induced skin injury on human keratinocytes, HaCaT cells. This study was aimed to investigate the protective activity of BP ethanol extract on UVB-irradiated skin injury in HaCaT cells. Methods: The skin injury model of HaCaT cells was established under UVB stimulation. HaCaT keratinocyte cells were pre-treated with BP ethanol extract for 1 h, and then stimulated with UVB. Then, the cells were harvested to measure the cell viability, production of reactive oxygen species(ROS), pro-inflammatory cytokines such as interleukin(IL) 1-beta, IL-6, and tumor necrosis factor(TNF)-𝛼, hyaluronidase, type 1 collagen, matrix metalloproteinase(MMP)s. In addition, we examined the mitogen activated protein kinases(MAPKs) and inhibitory kappa B alpha(I𝜅;-B𝛼) as inhibitory mechanisms of BP ethanol extract. Results: The treatment of BP ethanol extract inhibited the UVBinduced cell death and ROS production in HaCaT cells. BP ethanol extract treatment inhibited the UVB-induced increase of IL-1beta, IL-6, and TNF-𝛼. BP ethanol extract treatment inhibited the increase of hyaluronidase, MMP and decrease of collagen. BP ethanol extract treatment inhibited the activation of MAPKs and the degradation of I𝜅-B𝛼. Conclusions: Our result suggest that treatment of BP ethanol extract could inhibit the UVB-induced skin injury via deactivation of MAPKs and nuclear factor kappa B(NF-𝜅B) in HaCaT cells. This study could suggest that BP ethanol extract could be a beneficial agent to prevent skin damage or inflammation.

Seismic Performance Evaluation of a Cone-type Friction Pendulum Bearing System (원추형 마찰진자베어링의 내진성능평가)

  • Jeon, Bub-Gyu;Chang, Sung-Jin;Park, Kyung-Rock;Kim, Nam-Sik;Jung, Duk-Young
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.15 no.2
    • /
    • pp.23-33
    • /
    • 2011
  • In this study, a CFPBS (Cone-type Friction Pendulum Bearing System) was developed which controls the acceleration delivered to the structure to prevent damage and degradation of the critical communication equipment in case of an earthquake. The isolation performance of the CFPBS was evaluated by numerical analysis. The CFPBS was manufactured in the shape of a cone differenced from the existing FPS (Friction Pendulum System), and a pattern was engraved on the friction surface. The natural frequencies of the CFPBS were evaluated from a free-vibration test with the seismic isolator system consisting of four CFPBSs. In order to verify its earthquake-resistant performance, a numerical analysis program was created from the equation of the CFPBS induced from the equations of motion. A simplified theoretical equation of the CFPBS was proposed to manufacture the equipment which could demonstrate the necessary performance. Artificial seismic waves satisfying the maximum earthquake scale of the Korean Building Code-Structural (KBC-2005) were created and verified to review the earthquake-resistant performance of the CFPBS by numerical analysis. The superstructural mass of the CFPBS and skew angle of the friction surface were considered for numerical analysis with El Centro NS (1940), Kobe NS (1995) and artificial seismic waves. The CFPBS isolation performance evaluation was based on the results of numerical analysis and the executed comparative analysis between the results from numerical analysis and the simplified theoretical equation under the same conditions.

Anti-inflammatory Effect of Nypa fruticans Wurmb. on tumor necrosis factor (TNF)-α-induced Inflammatory response in HaCaT cells (TNF-α로 유도된 HaCaT 각질형성세포의 염증반응에서 해죽순의 항염증 효과)

  • Bae, Gi-Sang;Park, Sung-Joo
    • The Korea Journal of Herbology
    • /
    • v.34 no.1
    • /
    • pp.51-57
    • /
    • 2019
  • Objectives : Nypa fruticans Wurmb. (NF) have been used as a traditional medicine to treat inflammatory diseases in East-South Asia. However, it is largely undiscovered whether NF water extract could exhibit anti-inflammatory activities against tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$)-induced inflammatory responses on human keratinocytes, HaCaT cells. Therefore, this study was aimed to investigate the anti-inflammatory activity of NF water extract on TNF-${\alpha}$-induced inflammatory responses in HaCaT cells. Methods : To investigate the anti-inflammatory activites of NF water extract in HaCaT cells, the inflammatory model of HaCaT cells was established under a suitable concentration (10 ng/ml) of human TNF-${\alpha}$ (hTNF-${\alpha}$). HaCaT keratinocyte cells were pre-treated with NF water extract for 1 h, and then stimulated with hTNF-${\alpha}$. Then, the cells were harvested to measure the inflammatory mediators such as inducible nitric oxide synthase (iNOS), cyclooxygenase (COX)-2 and prostaglandin $E_2$ ($PGE_2$), and pro-inflammatory cytokine including TNF-${\alpha}$ and interleukin (IL)-6. In addition, we examined the inhibitory mechanisms of NF, mitogen activated protein kinases (MAPKs) and inhibitory kappa B alpha ($I{\kappa}-B{\alpha}$) Results : The treatment of NF inhibited the hTNF-${\alpha}$-induced elevation of iNOS, COX-2, and $PGE_2$ in HaCaT cells. In addition, NF treatment inhibited the hTNF-${\alpha}$-induced elevation of TNF-${\alpha}$ and IL-6. Furthermore, NF treatment inhibited the activation of MAPKs but not degradation of $I{\kappa}-B{\alpha}$. Conclusions : Taken together, our result suggest that treatment of NF could inhibit the hTNF-${\alpha}$-induced inflammatory responses via deactivation of MAPKs in HaCaT cells. This study could suggest that NF could be a beneficial agent to prevent skin damage or inflammation.

Gas Injection Experiment to Investigate Gas Migration in Saturated Compacted Bentonite (포화 압축 벤토나이트 내 기체 이동 현상 관측을 위한 기체 주입 시험)

  • Jung-Tae Kim;Changsoo Lee;Minhyeong Lee;Jin-Seop Kim;Sinhang Kang
    • Tunnel and Underground Space
    • /
    • v.34 no.2
    • /
    • pp.89-103
    • /
    • 2024
  • In the disposal environment, gases can be generated at the interface between canister and buffer due to various factors such as anaerobic corrosion, radiolysis, and microbial degradation. If the gas generation rate exceeds the diffusion rate, the gas within the buffer may compress, resulting in physical damage to the buffer due to the increased pore pressure. In particular, the rapid movement of gases, known as gas breakthroughs, through the dilatancy pathway formed during this process may lead to releasing radionuclide. Therefore, understanding these gas generation and movement mechanism is essential for the safety assessment of the disposal systems. In this study, an experimental apparatus for investigating gas migration within buffer was constructed based on a literature review. Subsequently, a gas injection experiment was conducted on a compacted bentonite block made of Bentonile WRK (Clariant Ltd.) powder. The results clearly demonstrated a sharp increase in stress and pressure typically observed at the onset of gas breakthrough within the buffer. Additionally, the range of stresses induced by the swelling phenomenon of the buffer, was 4.7 to 9.1 MPa. The apparent gas entry pressure was determined to be approximately 7.8 MPa. The equipment established in this study is expected to be utilized for various experiments aimed at building a database on the initial properties of buffer and the conditions during gas injection, contributing to understanding the gas migration phenomena.

Structure activity relationship on the herbicidal activity by the N-phenyl substituents of 2-(4-(6-chloro-2-benzoxazolyloxy)phenoxy)-N-Phenylpropionamide derivatives in down land (수답에서 2-(4-(6-chloro-2-benz-oxazolyloxy)phenoxy)-N-phenylpropionamide 유도체 중 N-phenyl 치환체들의 제초활성)

  • Sung, Nack-Do;Lee, Sang-Ho;Ko, Young-Kwan;Lee, Kyung-Mo;Kim, Dae-Whang;Kim, Tae-Joon
    • The Korean Journal of Pesticide Science
    • /
    • v.4 no.2
    • /
    • pp.21-28
    • /
    • 2000
  • A new fourty six 2-(4-(6-chloro-2-benzoxazolyloxy)phenoxy)-N-phenylpro- pionamide derivatives were synthesized and the herbicidal activities against rice plant and barnyard grass with pre-emergence in down land were measured. The structure activity relationships (SAR) between the activities and physicochemical parameters of the substituted(X) N-phenyl group in substrates were analyzed and discussed by Free- Wilson and Hansch method from the basis on the former study (Sung. et. al., 1999). The conditions of selective herbicide activity both the barnyard grass and rice plant are shown that the optimal hydrophobicity, $({\pi})_{opt.}=1.34$ and electron donating with field effect (F<0) of meta and ortho, para-substituted mono or disubstituent on the N-phenyl ring were found to contribute significantly. The herbicidal activities against barnyard grass are roughly the same as the results in up land whereas damage to rice plant in down land more increase than that of up land. Degradation products in water are 2-(4-(6-chloro-2-benzoxazolyloxy)phenoxy)propionic acid ((A)) (obs. pKa=4.35 & obs. logP=4.77) and 6-chloro-2-benzoxazolone (B) (obs. pKa=8.40 & obs. logP=2.90). These results were supposing that the hydrolysis product of substrates, (A) is comparatively absorbed in rice plant but not in barnyard grass. And it is assumed from the SAR equations that the 2,6-dimethyl-4-methoxymethyl group substituent ($pI_{50}=5.41$, 3g/ha) is selected as the most highest herbicidal activity against barnyard grass in green house.

  • PDF

Seismic Performance of Circular RC Bridge Columns with Longitudinal Steel Connection Details (축방향철근 연결상세에 따른 철근콘크리트 원형교각의 내진성능)

  • Lee Jae-Hoon;Son Hyeok-Soo;Ko Seong-Hyun
    • Journal of the Korea Concrete Institute
    • /
    • v.16 no.2 s.80
    • /
    • pp.249-260
    • /
    • 2004
  • The longitudinal steel connection of reinforced concrete bridge column is sometimes practically unavoidable, however the current Korean bridge design specifications have no special provisions about lap-splices of longitudinal steel. This paper reports experimental results of a research program investigating the seismic performance of circular RC bridge columns with respect to longitudinal steel connection detailing. Twenty-one circular column specimens were tested under quasi-static test. The columns with the entire longitudinal steel lap-spliced within plastic hinge region show relatively sudden strength degradation and low ductility than the columns with continuous longitudinal steel and the columns with half of longitudinal steel lap-spliced. However, the seismic performance of the column with mechanically connected longitudinal steel is similar to that of the column with continuous longitudinal steel. The final objectives of this study are to suggest appropriate longitudinal reinforcement connection details for the limited ductility design concept and to provide quantitative reference data and tendency for performance or damage assessment based on the performance levels such as cracking, yielding, collapse, etc. Ultimate displacement/drift ratio, displacement ductility, response modification factor, equivalent viscous damping ratio, residual deformation index, and effective stiffness are investigated and discussed in this paper.

Application of Au-Sn Eutectic Bonding in Hermetic Rf MEMS Wafer Level Packaging (Au-Sn 공정 접합을 이용한 RF MEMS 소자의 Hermetic 웨이퍼 레벨 패키징)

  • Wang Qian;Kim Woonbae;Choa Sung-Hoon;Jung Kyudong;Hwang Junsik;Lee Moonchul;Moon Changyoul;Song Insang
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.12 no.3 s.36
    • /
    • pp.197-205
    • /
    • 2005
  • Development of the packaging is one of the critical issues for commercialization of the RF-MEMS devices. RF MEMS package should be designed to have small size, hermetic protection, good RF performance and high reliability. In addition, packaging should be conducted at sufficiently low temperature. In this paper, a low temperature hermetic wafer level packaging scheme for the RF-MEMS devices is presented. For hermetic sealing, Au-Sn eutectic bonding technology at the temperature below $300{\times}C$ is used. Au-Sn multilayer metallization with a square loop of $70{\mu}m$ in width is performed. The electrical feed-through is achieved by the vertical through-hole via filled with electroplated Cu. The size of the MEMS Package is $1mm\times1mm\times700{\mu}m$. By applying $O_2$ plasma ashing and fabrication process optimization, we can achieve the void-free structure within the bonding interface as well as via hole. The shear strength and hermeticity of the package satisfy the requirements of MIL-STD-883F. Any organic gases or contamination are not observed inside the package. The total insertion loss for the packaging is 0.075 dB at 2 GHz. Furthermore, the robustness of the package is demonstrated by observing no performance degradation and physical damage of the package after several reliability tests.

  • PDF

Evaluation for Deformability of RC Members Failing in Bond after Flexural Yielding (휨항복 후 부착파괴하는 철근콘크리트 부재의 부착 연성 평가)

  • Choi, Han-Byeol;Lee, Jung-Yoon
    • Journal of the Korea Concrete Institute
    • /
    • v.24 no.3
    • /
    • pp.259-266
    • /
    • 2012
  • A general earthquake resistant design philosophy of ductile frame buildings allows beams to form plastic hinges adjacent to beam-column connections. In order to carry out this design philosophy, the ultimate bond or shear strength of the beam should be greater than the flexural yielding force and should not degrade before reaching its required ductility. The behavior of RC members dominated by bond or shear action reveals a dramatic reduction of energy dissipation in the hysteretic response due to the severe pinching effects. In this study, a method was proposed to predict the deformability of reinforced concrete members with short-span-to-depth-ratios, which would result in bond failure after flexural yielding. Repeated or cyclic loading produces a progressive deterioration of bond that may lead to failure at lower cyclic bond stress levels. Accumulation of bond damage is caused by the propagation of micro-cracks and progressive crushing of concrete in front of the lugs. The proposed method takes into account bond deterioration due to the degradation of concrete in the post yield range. In order to verify bond deformability of the proposed method, the predicted results were compared with the experimental results of RC members reported in the technical literature. Comparisons between the observed and calculated bond deformability of the tested RC members showed reasonably good agreement.