• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.4
• /
• pp.384-388
• /
• 1999

This paper describes an approach for synthesizing a modularized gain scheduled PD type fuzzy logic controller(FLC) of nonlinear magnetic bearing system where the gains of FLC are on-line adapted according to the operating point. Specifically the systematic procedure via root locus technique is carried out for the selection of the gains of FLC. Simulation results demonstrate that the proposed gain scheduled fuzzy logic controller yields not only maximization of stability boundary but also better control performance than a single operating point (without gain scheduling)fuzzy controller.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.101-102
• /
• 2006

Similar to Orthogonal Frequency Division Multiplexing (OFDM), a Single Carrier with Frequency Domain Equalization (SC-FDE) system is computationally efficient since equalization is performed on a block of data in the frequency domain. In coherent QAM schemes, the mean phase rotation error caused by the residual carrier frequency offset may lead to serious degradation. When the frequency equalizer is combined with the mean phase error tracking algorithm, its performance can be enhanced noticeably.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.32-36
• /
• 1999

본 연구에서는 대공 무기체계의 성능평가를 위한 시뮬레이션 모델의 개발로서 능력추정을 위한 수식의 전개와 전산프로그램을 개발하고 예제를 통하여 능력산출 예를 보였다. 본 연구에서 고려된 시뮬레이션 방법으로 Mon Carlo 시뮬레이션과 Karman Filtering을 사용하였다. 본 모델의 주요 단계로서 1) 가장 최단 경로에서의 표적과 탄두간의 상대 속도와 위치를 결정하고, 2) 표적의 탄두에 대한 취약면적을 산출하고 3) 마지막으로 표적살상 확률을 산정하는 과정의 단계에 따라 개발되었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.476-479
• /
• 2008

The combustion efficiency of the solid fuel ramjet is affected by the inlet air temperature. And this inlet air temperature is dependent on the flight Mach number and the environment air temperature. If the flight altitude is changeable, the inlet air temperature and the air density also vary. The performance efficiency is investigated with this variables related to the combustion efficiency.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.164.2-164
• /
• 2001

Sliding mode control (SMC) with variable nonlinear boundary layer is proposed. Two Fuzzy logic controllers (FLCs) are used to decide both boundary layer thickness and nonlinear interpolation using sigmoid function in the boundary layer. The nonlinear interpolation in the boundary layer suing FLC reduces stead state error and chattering. Sigmoid function is used to nonlinear interpolation in the boundary layer sigmoid function parameter with FLC. To demonstrate its performance, the Proposed control algorithm is applied to a simple nonlinear system.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.241-252
• /
• 2003

The purpose of this study was to evaluate performance characteristics in the success of team attack during volleyball game. Three dimensional analysis was performed with games of business teams. Analyzed variables were followed by the movement distance of a setter when A-quick was occurred, the position during the spike, the possibility area during the attack, the right and left distance of the assistance attacker, the distance between attacker and blocker, and the distance between blockers each others. 1. It is recommended that the movement distance of the setter be decreased in order to make stable set condition. 2. In order to make one person blocking, the formation was to be consisted of the right and left formation which was associated with the progressive attack performance of the assistance attacker. 3. It is useful to widen attack area. Also it is necessary to improve the enhancement of passing the ball against the blocking of an opponent player. Finally, it is necessary to develop kinematic variables to evaluate performance characteristics of players. Further study may consider the best defense position against the attack of the opponent player.

• Analytical Science and Technology
• /
• v.28 no.5
• /
• pp.347-352
• /
• 2015

Chemical properties such as heat of formation and density of methylnitroimidazole derivatives were predicted and analyzed by using density functional theory (DFT). Successive addition of energetic nitro groups into an imidazole ring increases both the heat of formation and the density. Using the chemical property values computed by DFT, explosive performance was analyzed with the Cheetah program, and compared with those of TNT, RDX, and HMX, which are currently used widely in military systems. When both C-J pressure and detonation velocity were used as explosive performance, methyldinitroimidazole derivatives show better performance than TNT, while methyltrinitroimidzole is almost close to RDX. Since methylnitroimidazole derivatives have a good merit, i.e. low melting point for melt loading, they are forecasted to be used widely in various military and civilian application.

• Journal of the Korea Society for Simulation
• /
• v.27 no.3
• /
• pp.109-116
• /
• 2018

In order to destroy the hard target, it is essential to develop a penetration warhead with high penetration performance. To design a penetration warhead, this paper discusses the effect of nose shape factors such that nose shape, nose length, nose tip diameter, on the penetration performance of the penetrator. AUTODYN-2D has been used to conduct the computational analysis. The experimental result of Forrestal, and a simulation result have been compared to verify the reliability of computational analysis. Computational results show that the nose length have more influence on the penetration performance than the nose shape. Furthermore, simulation results show that the penetration performance can be improved by increasing the nose tip diameter to a specific value, when the nose length of the penetrator is uniform.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.182-188
• /
• 2014

Source localization is an important problem in the field of sonar and radar, etc. For the purpose of source localization, two or more spatially separated sensors are often used to measure the time difference of arrivals of a radiating source whose transmitted signal waveform is unknown. The NLS(Nonlinear Least Square) cost function with curve fitting method was proposed recently, which provide robust source localization performance by reducing estimation ambiguity. However, even this algorithm shows degraded performance in a multipath environment. To estimates source localization correctly, source localization algorithm that eliminate the effect of multipath signals is required. In this paper, PMP(Power Matching Procedure) is added to the algorithm, which provides improved source localization performance by properly cutting out the effect of multipath signals. Through simulation the performance of the proposed source localization algorithm is verified.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.4
• /
• pp.543-550
• /
• 2017

Various chemical properties including density and heat of formation of 1-substitued trinitroimidazoles (TNIs) were estimated by using density functional theory (DFT). Using chemical properties estimated by DFT, explosive performance and sensitivity of 1-substitued TNIs were analyzed by following the ADD Method-1 procedure. The results were displayed on two-dimensional performance-sensitivity plot, and were compared with those of explosive molecules commonly used in many military systems. Different 1-substituents of TNI made that both explosive performance and impact sensitivity were changed significantly. Methyl substituted TNI became moderately insensitive and slightly less powerful. Amino, fluoro, picryl, and difluoroamino substituted TNIs were highly powerful like RDX and HMX, but greatly sensitive. Nitro substituted TNI was predicted to be extremely sensitive to be handled as a secondary explosive.