• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1075-1079
• /
• 2014

In this paper, we describe the analysis and the compensation method of the g-sensitivity error for MEMS vibratory gyroscopes. Usually, the g-sensitivity error has been ignored in the commercial MEMS gyroscope, but it deserves our attention to apply for the missile application as a tactical grade performance. Thus, it is necessary to compensate for the g-sensitivity error to reach a tactical grade performance. Generally, the g-sensitivity error seems intuitively to be a gyroscope bias error proportional to the linear acceleration. However, we assert that the g-sensitivity error mainly causes not a bias error but a scale-factor error. And we verify that the g-sensitivity scale-factor error occurs due to the non-linearity of parallel plate electrodes. Therefore, we propose the compensation method to remove the g-sensitivity scale-factor error. The experimental result showed that a proposed compensation method improved successfully the performance of the MEMS vibratory gyroscope.

• IE interfaces
• /
• v.25 no.4
• /
• pp.431-440
• /
• 2012

Since pooling is a popular scheme in many areas to attain operational excellence, many researchers investigated the performance of pooling systems. However, rare research could be found on pooling with game situation which has much applicability to real world phenomenon. We analyze the performance of noncooperative pooling system with two servers having different sharing capacity. We investigate the sensitivity of the advantage of capacity pooling on the variation of system parameters, including sharing capacity numbers, pooling probability, pooling strategy and traffic intensity. As a result, we suggest an efficient control policy which facilitate the performance of pooling in a game situation.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.2
• /
• pp.334-343
• /
• 2017

The optimum design of an SAR (Synthetic Aperture Radar) satellite constellation is developed herein using a genetic algorithm. The performance of Earth observations using a satellite constellation can be improved by minimizing the maximum revisit time. Classical orbit design using analytic methods has limitations when addressing orbit dynamics due to various disturbances. To overcome this issue, an optimization technique based on a genetic algorithm is used. STK (Systems Tool Kit) is utilized to propagate the satellite orbit when considering external disturbances, and the maximum revisit time on the earth observation area is calculated. By minimizing the performance index using a genetic algorithm, the optimum orbit of the satellite constellation is designed. Numerical results are provided to demonstrate the performance of the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.9
• /
• pp.947-953
• /
• 2011

Radome aberration error causes degradation of miss distance as well as stability of high maneuver missile system with RF seeker. A study about radome compensation method is important in this kind of missile system design. Several kinds of methods showed good compensation performance in their paper. Proposed adaptive Particle filter estimates line of sight rate excluding the radome induced error. This paper shows effectiveness of adaptive Particle filter as compensation method of radome aberration error. Robust performance of this filter depends on external aiding measurement, target acceleration. Tuning of system error covariance can make this filter unsensitive against the error of target acceleration information. This paper demonstrates practical usage of adaptive Particle filter for reducing miss distance and increasing stability against disturbance of radome aberration error through performance analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.176.2-176
• /
• 2001

In Underwater Flight Vehicle depth control system, the followings must be required. First, it needs robust performance which can get over nonlinear characteristics. Second, it needs accurate performance which have small overshoot phenomenon and steady state error. Third, it needs continuous control input. Finally, it needs interpolation method which can solve the speed dependency problem of controller parameters. To solve these problems, we propose adepth control method using Fuzzy Sliding Mode Controller and Neural Network Interpolator. Simulation results show the proposed method has robust and accurate control performance by the continuous control input and has no speed dependency problem.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.3
• /
• pp.137-144
• /
• 2016

In this paper, the performance of ranging measurement, which is generated using two receiver clock offsets in one receiver, was analyzed. A spoofer transmits a counterfeited spoofing signal which is similar to the GPS signal with hostile purposes, so the same tracking technique can be applied to the spoofing signal. The multi-correlator can generate two receiver clock offsets in one receiver. The difference between these two clock offsets consists of the path length from the spoofer to the receiver and the delay of spoofer system. Thus, in this paper, the ranging measurement was evaluated by the spoofer localization performance based on the time-of-arrival (TOA) technique. The results of simulation and real-world experiments show that the position and the system clock offset of the spoofer could be estimated successfully.

• Earthquakes and Structures
• /
• v.15 no.2
• /
• pp.155-164
• /
• 2018

Design of structures subjected to blast loads are usually carried out through nonlinear inelastic dynamic analysis followed by imposing acceptance criteria specified in design codes. In addition to comprehensive aspects of inelastic dynamic analyses, particularly in analysis and design of structures subjected to transient loads, they inherently suffer from convergence and computational cost problems. In this research, a strategy is proposed for design of steel moment resisting frames under far range blast loads. This strategy is inspired from performance based seismic design concepts, which is here developed to blast design. For this purpose, an algorithm is presented to calculate the capacity modification factors of frame members in order to simplify design of these structures subjected to blast loading. The present method provides a simplified design procedure in which the linear dynamic analysis is preformed, instead of the time-consuming nonlinear dynamic analysis. Nonlinear and linear analyses are accomplished in order to establish this design procedure, and consequently the final design procedure is proposed as a strategy requiring only linear structural analysis, while acceptance criteria of nonlinear analysis is implicitly satisfied.

• Journal of Korean Society for Quality Management
• /
• v.24 no.3
• /
• pp.37-49
• /
• 1996

For highly reliable devices it is often defined to "fail" when its performance degrades below a specified value. In this paper we consider a method for optimally designing accelerated degradation tests(ADTs) in which the performance over exposure time and stress has Weibull distribution. For the product whose performance has Weibull distribution, the optimum plan - low stress level and sample proportions allocated to each test condition - is obtained, which minimize the asymptotic variance of maximum likelihood estimator of a stated quantile at design stress. We also present compromise ADTs plan that can be used for the practical purpose.

• Korean Journal of Remote Sensing
• /
• v.36 no.4
• /
• pp.545-555
• /
• 2020

This paper focuses on automatic image registration between EO (Electro-Optical) and IR (InfraRed) satellite images with different spectral properties using block-based approach and simple preprocessing technique to enhance the performance of feature matching. If unpreprocessed EO and IR images from Kompsat-3A satellite were applied to local feature matching algorithms(Scale Invariant Feature Transform, Speed-Up Robust Feature, etc.), image registration algorithm generally failed because of few detected feature points or mismatched pairs despite of many detected feature points. In this paper, we proposed a new image registration method which improved the performance of feature matching with block-based registration process on 9-divided image and pre-processing technique based on adaptive histogram equalization. The proposed method showed better performance than without our proposed technique on visual inspection and I-RMSE. This study can be used for automatic image registration between various images acquired from different sensors.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.7
• /
• pp.47-54
• /
• 2017

Recently, correlation filter based trackers have shown excellent tracking performance and computational efficiency. In order to enhance tracking performance in the correlation filter based tracker, search area which is image patch for finding target must include target. In this paper, two methods to discriminatively represent target in the search area are proposed. Firstly, search area location is estimated using pyramidal Lucas-Kanade algorithm. By estimating search area location before filtering, fast motion target can be included in the search area. Secondly, we investigate multi-channel Local Edge Pattern(LEP) which is insensitive to illumination and noise variation. Qualitative and quantitative experiments are performed with eight dataset, which includes ground truth. In comparison with method without search area estimation, our approach retain tracking for the fast motion target. Additionally, the proposed multi-channel LEP improves discriminative performance compare to existing features.