• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.246-246
• /
• 2016

Tungsten-nitrogen (W-N) co-doping has been known to enhance the photocatalytic activity of anatase titania nanoparticles by utilizing visible light. The doping effects are, however, largely dependent on calcination or annealing conditions, and thus, the massive production of quality-controlled photocatalysts still remains a challenge. Using density functional theory (DFT) thermodynamics and time-dependent DFT (TDDFT) computations, we investigate the atomic structures of N doping and W-N co-doping in anatase titania, as well as the effect of the thermal processing conditions. We find that W and N dopants predominantly constitute two complex structures: an N interstitial site near a Ti vacancy in the triple charge state and the simultaneous substitutions of Ti by W and the nearest O by N. The latter case induces highly localized shallow in-gap levels near the conduction band minimum (CBM) and the valence band maximum (VBM), whereas the defect complex yielded deep levels (1.9 eV above the VBM). Electronic structures suggest that substitutions of Ti by W and the nearest O by N improves the photocatalytic activity of anatase by band gap narrowing, while defective structure degrades the activity by an in-gap state-assisted electron-hole recombination, which explains the experimentally observed deep level-related photon absorption. Through the real-time propagation of TDDFT (rtp-TDDFT), we demonstrate that the presence of defective structure attracts excited electrons from the conduction band to a localized in-gap state within a much shorter time than the flat band lifetime of titania. Based on these results, we suggest that calcination under N-rich and O-poor conditions is desirable to eliminate the deep-level states to improve photocatalysis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.7 no.1
• /
• pp.75-83
• /
• 1980

Rickets is not the deposite of minerals in the skeletal tissue and the retardation of skeletal growth in growing in growing animals. This study was undertaken to investigate the histologic effects of experimental rickets on the dental structure of the albino rats, and to show the relationship between the histological effects and the pulpal disease which induced premature loss of the primary teeth. This study was based on material obtained from 40 white rats that were placed on a rachitogenic diet for a period 1 to 56 days after weaning (at 24 days). In addition, a study was made of 25 litter mates, 24 to 80 days, that were fed a normal diet. The following results were obtained: 1. Enamel formation and calcification showed no significant changes and no hypoplasia. 2. Dentin formation and calcification was retarded and disturbed. In the experimental group, predentin/calcified dentin was remarkablly increased. 3. Newly formed dentin showed interglobular texture (less homogenous calcification) and the predentin was significantly wider and thicker, and there was an irregular wave in the basal portion of the rat's incisors. 4. In cementum, Matrix formed at almost a normal rate but calcification was defective. So cementoid tissue was increasesd. 5. The formation of the alveolar bone was at almost a normal rate but calcification was retarded. The trabecular bone was filled with osteoid tissue and thicker than in normal groups.

• Solar Energy
• /
• v.20 no.1
• /
• pp.11-20
• /
• 2000

To get more insight into the buffering effects of the p-${\mu}c$-Si:H Inserted at the p-a-SiC:H/i-a-Si:H interface, we present a systematic numerical simulation using Gummel-Schafetter method. The reduced recombination loss at the p/i interface due to a constant bandgap buffer is analysed in terms of the variation of the p/i Interface region with a short lifetime and the characterisitics of the buffer such as mobility bandgap, acceptor concentration, and D-state density. The numerical modeling on the constant bandgap buffer demonstrates clearly that the buffering effects of the thin p-${\mu}c$-Si:H originate from the shrinkage of highly defective region with a short lifetime in the vicinity of the p/i interface.

• Steel and Composite Structures
• /
• v.29 no.5
• /
• pp.647-657
• /
• 2018

Geometric imperfections may be created during the production process or setting borders of single-layer graphene sheets (SLGSs). Vacancy defects are an instance of geometric imperfection, so investigating the effect of these vacancies on the mechanical properties of single-layer graphene is extremely important. Since very few studies have been conducted on the structure of imperfect graphene (with the vacancy defect) as an anisotropic structure, further study of this defective structure seems imperative. Due to the vacancy defects and for the proper assessment of mechanical properties, the graphene structure should be considered anisotropic in certain states. The present study investigates the effects of site and size of vacancy defects on the mechanical properties of graphene as an anisotropic structure using the lekhnitskii interaction coefficients and Molecular Dynamic approach. The effect of temperature on the severity of the SLGS becoming anisotropic is also investigated in this study. The results reveal that the amount of temperature has a big effect on the severity of the structure getting anisotropic even for a graphene without any defects. The effect of aspect ratio, temperature and also size and site of vacancy defects on the material properties of the graphene are studied in this research work. According to the present study, using material properties of flawless graphene for imperfect structure can lead to inaccurate results.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1324-1328
• /
• 2018

By employing ab-initio total-energy and electronic-structure calculations based on the density-functional theory, we studied the effects of surface strain ${\varepsilon}_s$ on the adsorption properties of a Au adatom on defective MgO(001) surfaces with surface oxygen vacancies ($F_s$ centers). The formation energy of the $F_s$ center on MgO(001) varied very slightly in the region of ${\varepsilon}_s$ from -6% to -4% and monotonically decreased with the increase in ${\varepsilon}_s$, from -4% to +6%. As ${\varepsilon}_s$ increased, the adsorption energy ($E^{Fs}_{ads}$) of Au on the $F_s$ center of strained MgO(001) monotonically decreased and, in particular, showed a much larger decrease in $E^{Fs}_{ads}$ for a tensile surface strain of ${\varepsilon}_s$ > +4%. The surface strain dependence on the physical properties, such as the charge states, the spatial charge rearrangement, for Au on the $F_s$ center of strained MgO(001) surfaces was also analyzed. These results provide important physical information on the effects of surface strain on the adsorption of Au on MgO(001) surfaces with $F_s$ centers.

• Journal of Veterinary Clinics
• /
• v.39 no.1
• /
• pp.9-15
• /
• 2022

As more veterinary clinics become specialized with the growth of the companion animal market, an increasing number of veterinary clinics perform orthopedic surgery and use orthopedic products, some of which are defective and have side effects. Thus, the present study aimed to prepare fundamental data for the revision and development of manufacturing standards for these products in order to prevent their side effects. We conducted a survey targeting veterinary clinics as consumers and medical device companies as suppliers. Veterinary clinics were surveyed via offline and online methods; 320 clinics that offered orthopedic surgery and approximately 4,000 veterinary clinics that were registered in the Korean Veterinary Medical Association were targeted, and 153 veterinary clinics responded to the survey. The survey for medical device companies, was performed online, targeting 29 companies; 14 companies responded. The number of side effects of orthopedic products was higher in animal orthopedic products than in those for human use. Many consumers tended to suspect that side effects were caused by product defects. To resolve side effects after using orthopedic products, consumers mostly underwent reoperation. Meanwhile, some severe cases proceeded to legal disputes. Similarly, medical device companies, or the suppliers, responded that most side effects occurred in veterinary orthopedic products and that product defects and mistakes in use were the causes. As for most of the follow-up actions for side effects, these companies either reported the issue to those in charge or analyzed and resolved the issues themselves. Therefore, to develop quality products, suppliers should be provided with clear standards for the production, and information disclosure and a report system for side effects should be particularly established to gain consumers' trust regarding the safety of these products.

• Biomolecules & Therapeutics
• /
• v.11 no.2
• /
• pp.81-84
• /
• 2003

Recently, diabetes has been found to be associated with osteoporosis. Specially in IDDM. In both type I and type II diabetes, glucose levels are elevated. Thus, a linkage between high glucose and osteoporosis can not be ruled out. In this study, an attempt has been made to observe the effect of high glucose on bone formation; osteoblast like UMR 106 cells were treated with high glucose (22 mM, 33 mM) for 1, 3 or 7 days. The high concentration of glucose inhibited markers. of bone formation activity such as alkaline phosphatase and collagen synthesis. In addition, reduction in the level of total cellular protein in response to high glucose was also observed. This study showed high glucose concentration could alter the bone metabolism leading to a defective bone formation and thus paving the linkage of such situation to diabetic complications.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.3
• /
• pp.143-157
• /
• 1996

This paper addresses the effects of an imperfect production process on the optimal production quantity and quality inspection policies. The system is assumed to deteriorate during the production process. The result are either the production of a number of defective items or the breakdown of the production meachine. A simple rule has been suggested to determine whether multiple quality in spection is workth or not. Furthermore, when multiple inspection policy is adopted, the optimal in spection schedule is shown to be equally spaced throughout the production cycle. Exact solution and approximation of the optimal production quantity and approximation of the optimal number of inspection are provided. Finally , to better understand the model of this paper, comparisons between this model and classical EMQ model are provided.

• Clinical and Experimental Reproductive Medicine
• /
• v.41 no.2
• /
• pp.47-61
• /
• 2014

Stored maternal factors in oocytes regulate oocyte differentiation into embryos during early embryonic development. Before zygotic gene activation (ZGA), these early embryos are mainly dependent on maternal factors for survival, such as macromolecules and subcellular organelles in oocytes. The genes encoding these essential maternal products are referred to as maternal effect genes (MEGs). MEGs accumulate maternal factors during oogenesis and enable ZGA, progression of early embryo development, and the initial establishment of embryonic cell lineages. Disruption of MEGs results in defective embryogenesis. Despite their important functions, only a few mammalian MEGs have been identified. In this review we summarize the roles of known MEGs in mouse fertility, with a particular emphasis on oocytes and early embryonic development. An increased knowledge of the working mechanism of MEGs could ultimately provide a means to regulate oocyte maturation and subsequent early embryonic development.

• Structural Engineering and Mechanics
• /
• v.10 no.1
• /
• pp.81-92
• /
• 2000

This study is an investigation of the effect of cracks on the dynamical characteristics of a cantilever beam, having multiple open-edge transverse cracks. The flexibilities due to crack have been identified for several crack depths and locations. In the study the finite element method and component mode synthesis methods are used. Coupling the components is performed by a flexibility matrix taking into account the interaction forces. Each component is modelled by cantilever beam finite elements with two nodes and three degrees of freedom at each node. The results obtained lead to conclusion that, by using the drop in the natural frequencies and the change in the mode shapes, the presence and nature of cracks in a structure can be detected. There is some counter-evidence, however, that the effects due to multiple cracks may interact to make detection more difficult than for isolated cracks.