• Journal of the Korean Wood Science and Technology
• /
• 제44권5호
• /
• pp.726-735
• /
• 2016

본 연구는 두께 15 cm와 18 cm 크기 Douglas-fir, Hemlock, Radiata pine 정각재의 고온건조 특성을 평가하기 위해 수행되었다. 수종에 따른 최종함수율은 시험재의 두께에 관계없이 Radiata pine, Douglas-fir, Hemlock 순으로 Radiata pine에서 가장 낮았으며, 배할처리를 하였을 때 무처리재보다 낮은 함수율을 나타내었다. Radiata pine과 Hemlock의 경우 배할처리를 하였을 때 함수율과 뒤틀림 발생을 감소시키는 효과가 있는 것으로 나타났다. Douglas-fir는 수를 포함하지 않는 정목형태로 가공될 때 건조결함의 감소가 가능하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권1호
• /
• pp.1-8
• /
• 2016

목재 데크재에 인위적인 결함인 구멍을 부여하고 이들의 성능평가를 위해 초음파 비파괴 시험법을 적용하였다. 구멍의 크기와 개수를 달리하여 각각에 대한 초음파 전달속도를 측정하고 탄성계수를 산정하여 그 영향을 비교분석하였다. 시험결과 구멍의 크기가 커짐에 따라 초음파 전달속도와 탄성계수는 감소하였으며 이들 상호간에는 직선상관관계를 보였다. 구멍의 크기가 증가하면 초음파의 전달 길이는 증가하며 이에 따라 초음파속도는 감소하였지만 구멍의 크기가 15 mm 이하로 작은 경우에는 구멍이 없는 부재에 비해 그 차이가 작게 나타났다. 구멍의 개수가 많아짐에 따라 초음파 전달속도와 탄성계수는 감소하였으며 이들 상호간에는 높은 직선상관관계를 보였다. 구멍의 개수가 3개인 경우 초음파속도는 약 3.5% 정도 감소한데 비하여 탄성계수는 27% 정도로 현저히 감소하여 더 큰 감소경향을 나타내었다. 이들의 결과로부터 구멍의 크기와 개수는 초음파 전달속도와 탄성계수에 영향을 미치며 구멍의 크기가 크고 개수가 많아질수록 그 영향은 더욱 커질 것으로 여겨진다. 또한 작은 결함의 탐지를 위해서는 초음파 전달속도에만 의지할 것이 아니라 여러 초음파 변수를 고려하여 적용하는 방법을 고려하여야 할 것으로 생각된다.

• 공업화학
• /
• 제18권5호
• /
• pp.527-530
• /
• 2007

방염도료로 일액형 염화고무(Chlorinated Rubber) 백색도료가 많이 사용되고 있는데 이는 탄화시 검은 연기가 많이 발생되고 목재에 대한 표면강도와 접착력 등의 미흡한 단점이 있어 이러한 점 등을 고려한 Polyurethane Resin계(Alkyd Resin) 이액형 방염우레탄라카 백색도료를 개발하였다. 본 실험에서 개발한 목재용 Polyurethane Resin계 방염도료 조성의 물성은 기존의 방염백색도료보다 목재와의 친화력이 향상되고 다량의 연기발생은 억제하는 결과를 얻었다.

• 한국가구학회지
• /
• 제21권4호
• /
• pp.314-325
• /
• 2010

Shake and gnarl in the timber market are considered as a defect of reducing the quality of timber. However, this study expects that shake and gnarl are the optimum design tools to improve aesthetics of furniture if their unique form is properly used as formative expression factors of wooden furniture. This study is conducted to suggest methods in order for consumers and designers to consider shake and gnarl as new formative factors and apply them to wooden furniture designs. The study conducts a preference survey of general people by manufacturing furniture that has or doesn't have shake and gnarl, and measures the level of aesthetics after providing furniture design majors with furniture image that reprocesses shake and gnarl in a new way. According to the findings, shake and gnarl have latent aesthetic values, which verifies that various methods can be used to improve aesthetics of wooden furniture by means of a case study. By applying hidden authentic value of the verified shake and gnarl to furniture design, various improvement methods of aesthetics will have to be actively studied.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.61-70
• /
• 1994

This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.

• Journal of the Korean Wood Science and Technology
• /
• 제45권1호
• /
• pp.20-27
• /
• 2017

본 연구의 목적은 목재의 세 주요 축 방향에 대하여 각 방향별 탄성계수를 비파괴적으로 측정하여 이에 따른 목재의 이방성을 검토해 보고자 하였다. 결점이 없는 SPF (spruce-pine-fir)와 Hem-fir 및 낙엽송재에 대하여 무결점 시험편을 채취하고 각 시험편에 대해 세 방향에서 초음파 속도를 측정한 다음, 이 속도와 각 재료의 밀도를 이용하여 산정된 탄성계수를 비교하였다. 시험 결과 초음파속도 및 탄성계수는 방향별로 목재의 길이방향, 방사방향, 접선방향의 순으로 나타났으며, 밀도가 높을수록 각 방향별 탄성계수가 더 높게 나타났다. 수종 간에 있어서 길이방향의 탄성계수의 차이보다 방사방향, 접선방향의 차이가 더 크게 나타났다. 산정된 탄성계수를 사용하여 재료의 이방성을 비교하여 제시하였으며, 이를 통해 강성매트릭스의 대각선 항을 산정하였다.

• 한국가구학회지
• /
• 제21권1호
• /
• pp.26-39
• /
• 2010

This is a leading study to replace the structural analysis methodology on the specific traditional joint by a numerical analysis. Tests were carried out to test the compressive methodologies with the numerical results. The Japanese larch was used as a sample. The Orthotropic property of wood was specifically considered for the finite element numerical analysis. Linear numerical analysis and non-linear numerical analysis for the BEAM element and the two SOLID elements of ANSYS were used to analyze the compressive performance. In addition, more finely divided elements were used to raise the accuracy of the numerical result. Finally, the statistically significant differences were tested between that of the analytical and numerical results. It could be concluded that the SOLID 64 element shows the most optimum result when the non-linear analysis with the more finely divided element was used. However, finely dividing of the element is a considerable time consuming process, and it is quite difficult to raise the accuracy of the non-linear numerical analysis. Therefore, if considering the vertical displacement to be of the only interest, the BEAM element is more efficient than the SOLID element because the BEAM element is reflected as a simple line, which is less time consuming and difficult in dividing the elements. But, the BEAM element cannot accurately model the knot as a strength defect factor which is an important property in the orthotropic property of wood. Therefore, the SOLID element should be used to model the strength defect factor, knot, as it can be efficiently applied on the structural size flexure member which could be more strongly effected by the knot. In addition, it is useful at times when the failure types of members are to be more closely investigated, as the SOLID element is able to examine the local stress distribution of the member. The conclusion drawn by this study is of the good concordance between analytical results and numerical results of compressive wood members, but how orthotropic properties should only be considered. The numerical analysis on the specific Korean traditional joints will be based on the current study results.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.251-256
• /
• 2006

The purpose of this study was to confirm multiple retention system of C-PAM, A-PAM and Inorganic micro particles vs. traditional micro particle system and dual polymer system by measuring retention, drainage and formation using RDA HSF and Techpap 2D -F Sensor The benefits of dual polymer system were easy to use, low chemical consumption and good retention property but defect was worse drainage property than inorganic microparticle systems. On the other hand, Inorganic microparticle system had benefit of good drainage effect but defects were difficult to use, high chemical consumption. Therefore, we tried to find optimal morphology of polyacrylamide and applied to multiple retention system of C-PAM, A-PAM and inorganic microparticles to compensate defects of both of retention systems. As a result, we found the performance of branched C-PAM, branched A-PAM and inorganic micro particle triple system was more appropriate than traditional inorganic mircoparticle systems or dual polymer systems by comparing retention, drainage and formation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.161-162
• /
• 2020

In this study, as part of securing related data, water droplets were dropped on the upper part of the wooden board for flooring in an environment such as floor heating, and the degree of absorption according to the surface temperature change was tested. The test results showed that the contact angle of the surface was low (25℃→40℃) or the droplet was absorbed into the small plate and disappeared. The contact angle of the OSB and MDF was decreased within 30 minutes, but the surface water droplet was maintained longer than the plywood. This is because the surface is coated with hydrophobicity unlike the plywood, but moisture absorption in the cross section after the second processing will not be prevented and it will lead to defect occurrence problem.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.88-95
• /
• 2008

내구성과 관련하여 구조부재의 수축문제가 목구조에서는 커다란 관심사가 되고 있다. 특히, 목재 소재를 적극 활용하는 전통공법에서는 짜맞춤 부위, 부재와 벽 등에서 발생하는 건조수축에 의한 갈라짐 등의 결함이 더욱 문제시되고 있다. 또한, 최근 기둥-보 공법에서 많이 사용되고 있는 국내산 낙엽송 집성재의 이용에 있어서도 함수율변화로 인한 수축과 팽윤에 대한 검토를 행할 필요성이 제기되고 있다. 낙엽송 소재와 접착층수를 달리한 낙엽송 집성재의 시험편에 대해 다양한 함수율상태에서의 치수변화율을 살펴보았다. 건조수축에 의한 치수변화 억제효과는 3층 이상의 접착층을 가지는 시험편에서 그 효과가 현저함을 알 수 있었다. 그리하여, 소재를 사용할 경우 최종사용조건에 맞추어 건조를 충분히 행하거나, 구조부재로 집성재를 이용함으로써 건조수축 문제를 어느 정도 해결할 수 있는 것으로 판명되었다.