• 제목/요약/키워드: defect judgment

검색결과 39건 처리시간 0.024초

모바일 디바이스의 원인불명고장에 관한 비용 추정 (Mobile Device NDF(No Defect Found) Cost Estimation)

  • 이제왕;이정우;한창희
    • 산업경영시스템학회지
    • /
    • 제44권2호
    • /
    • pp.102-114
    • /
    • 2021
  • NDF (No Defect Found) is a phenomenon in which defects have been found in the manufacturing, operation and use of a product or facility, but phenomenon of defects is not reproduced in the subsequent investigation system or the cause of the defects cannot be identified. Recently, with the development of the fourth industrial revolution, convergence of hardware and software technologies in various fields is spreading to products such as aircraft, home appliances, and mobile devices, and the number of parts is increasing due to functional convergence. The application of such convergence technologies and the increase in the number of parts are major factors that lead to an increase in NDF phenomena. NDF phenomena have a significant negative impact on cost, reliability, and reliability for both manufacturers, service providers and operators. On the other hand, due to the nature of NDF phenomena such as difficult and intermittent cause identification and ambiguity in judgment, it is common to underestimate the cost of NDF or fail to take appropriate countermeasures in corporate management. Therefore, in this paper, we propose a methodology for estimating NDF costs by the PAF model which is a quality cost analysis model and ABC (Activity Based Costing) technique. The methodology of this study suggests a detailed procedure and the concept to accurately estimate the NDF costs, using ABC analysis, accounting system information, and IT system data. In addition case studies have validated the methodology. We think this could be a valid methodology to refer to when estimating the cost of other parts. And, it is meaningful to provide important judgment information in the decision-making process based on quality management and ultimately reduce NDF costs by visualizing them separately by major variable factors.

공동주택 층간균열의 하자판정 및 보수공법 적용에 대한 개선방안 (Improvement Measures for the Defect Determination and the Application of Repair Method for Interlayer Cracks in Apartment Houses)

  • 최상진;신만중
    • 한국건설관리학회논문집
    • /
    • 제23권5호
    • /
    • pp.23-33
    • /
    • 2022
  • 공동주택의 하자소송 금액에서 가장 많은 비율을 차지하고 있는 균열하자는 하자판정 기준이 명확하지 않아 판결에 따라 하자에 관한 판단이 엇갈리고 있다. 균열하자 판결금액 대부분을 차지하는 층간균열은 균열의 폭이나 상태와 관계없이 모두 하자로 판정되는 추세이며, 보수공법 또한 대부분 일률적으로 정해지고 있다. 이는 균열하자 판정의 기준이 되는 국토교통부의 하자판정기준과 법원에서 기준을 삼는 건설감정실무의 기준이 일치하는 않는 문제에서 출발한다. 법령의 개정과 법원감정실무지침서의 개정 등을 통해 모든 이해관계자가 적용할 수 있는 하자판정 기준의 수립이 필요하다. 또한, 층간균열 보수공법 기준은 층간균열의 폭과 상태에 따라 공법을 적용할 필요성이 있다. 균열에 대한 하자판정과 보수공법적용을 합리화한다면 소송에만 의존하는 현재의 하자분쟁 추세를 바꿀 수 있는 계기가 될 수 있을 것이다.

A Synthetic Chart to Monitor The Defect Rate for High-Yield Processes

  • Kusukawa, Etsuko;Ohta, Hiroshi
    • Industrial Engineering and Management Systems
    • /
    • 제4권2호
    • /
    • pp.158-164
    • /
    • 2005
  • Kusukawa and Ohta presented the $CS_{CQ-r}$ chart to monitor the process defect $rate{\lambda}$ in high-yield processes that is derived from the count of defects. The $CS_{CQ-r}$ chart is more sensitive to $monitor{\lambda}$ than the CQ (Cumulative Quantity) chart proposed by Chan et al.. As a more superior chart in high-yield processes, we propose a Synthetic chart that is the integration of the CQ_-r chart and the $CS_{CQ-r}$chart. The quality characteristic of both charts is the number of units y required to observe r $({\geq}2)$ defects. It is assumed that this quantity is an Erlang random variable from the property that the quality characteristic of the CQ chart follows the exponential distribution. In use of the proposed Synthetic chart, the process is initially judged as either in-control or out-of-control by using the $CS_{CQ-r}$chart. If the process was not judged as in-control by the $CS_{CQ-r}$chart, the process is successively judged by using the $CQ_{-r}$chart to confirm the judgment of the $CS_{CQ-r}$chart. Through comparisons of ARL (Average Run Length), the proposed Synthetic chart is more superior to monitor the process defect rate in high-yield processes to the stand-alone $CS_{CQ-r}$ chart.

공동주택 하자소송 사례분석을 통한 분쟁방지 대책에 관한 연구 (A Study of the Prevent Measure by Case Analysis of Apartment Building Defect Lawsuit)

  • 편수정;김종호;김규용;최경철;손민재;남정수
    • 한국건축시공학회지
    • /
    • 제21권4호
    • /
    • pp.257-268
    • /
    • 2021
  • 본 연구는 최근 급증하고 있는 공동주택의 하자분쟁과 관련하여 하자소송이 급증한 시점인 2013년을 기준으로 2013년 이전과 이후의 하자소송 판례 24건의 공종별 주요 쟁점사항에 대하여 분석한 결과 세대당 하자적출금액은 2013년 이후는 2013년 이전과 비교하여 약 5% 감소한 세대당 2,572천원이나, 세대당 판결금액은 오히려 약 19%가 증가하여 2013년 이후에는 세대당 1,916천원으로 나타났다. 공종별로 살펴보면 균열에 대한 하자가 2013년 이전과 이후 가장 큰 비율을 차지하였고, 2013년 이전에는 설비, 타일, 창호 순으로 나타났고, 2013년 이후에는 조경, 타일, 단열 및 창호공사 순으로 나타났다. 이러한 하자분쟁 예방을 위해서는 설계단계, 시공단계 및 유지보수단계에서 하자분쟁 방지 노력이 필요할 것이다.

공동주택 하자분쟁 조정제도의 활성화 방안- 기술적 쟁점사항에 대한 대응전략을 중심으로 - (Revitalization of the Conciliation System for Defect Disputes Related to Apartment Buildings - On the Technical Issue -)

  • 박준모;김옥규;김진이
    • 한국건축시공학회지
    • /
    • 제11권3호
    • /
    • pp.208-220
    • /
    • 2011
  • 공동주택 하자분쟁을 해결하고자 하는 노력의 일환으로 최근 하자분쟁조정제도가 도입되었다. 하지만, 당해 제도는 현재의 하자분쟁의 쟁점사항과 분쟁 당사자들의 입장을 제대로 반영하고 있지 못하다. 또한, 제도의 내용과 절차에서 많은 미비점이 존재한다. 본 연구에서는 하자분쟁의 여러 내용적인 측면 중에서 기술적 쟁점사항에 대해 정리하고 하자분쟁조정제도가 정착되기 위한 대안마련을 검토하였다. 그 결과 현행 하자분쟁의 판정논리체계요소에 대해 정리할 수 있었고, 이에 효과적으로 대응하기 위한 전략으로서 활성화 방안을 제시하였다. 그 기본 원칙은 조정자와 분쟁 당사자간의 신뢰관계를 구축해야 하는 것이며, 사회적 기대사항에 대한 부합, 제도적 차원의 활성화 방안이 뒷받침되어야 할 것으로 판단된다.

Safety diagnosis process for deteriorated buildings using a 3D scan-based reverse engineering model

  • Jae-Min Lee;Seungho Kim;Sangyong Kim
    • Smart Structures and Systems
    • /
    • 제31권1호
    • /
    • pp.79-88
    • /
    • 2023
  • As the number of deteriorated buildings increases, the importance of safety diagnosis, maintenance, and the repair of buildings also increases. Traditionally, building condition assessments are performed by one person or one company and various inspections are needed. This entails a subjective judgment by the inspector, resulting in different assessment results, poor objectivity and a lack of reliability. Therefore, this study proposed a method to bring about accurate grading results of building conditions. The limitations of visual inspection and condition assessment processes previously conducted were identified by reviewing existing studies. Building defect data was collected using the reverse-engineered three-dimensional (3D) model. The accuracy of the results was verified by comparing them with the actual evaluation results. The results show a 50% time-saving to the same area with an accuracy of approximately 90%. Consequently, defect data with high objectivity and reliability were acquired by measuring the length, area, and width. In addition, the proposed method can improve the efficiency of the building diagnosis process.

도장공사 하자판정기준 개선 및 방화문 교체 주기 설정에 관한 법령 개정안 제안 연구 (A Study on the Proposal of Amendment of Laws and Regulations on the Improvement of Defect Determination Criteria for Painting Work and the Establishment of Replacement Cycle for Fire door)

  • 김수연;권영진;김윤성;오상근
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 가을 학술논문 발표대회
    • /
    • pp.95-96
    • /
    • 2022
  • Based on the analysis of defects occurring before and after painting work, this study intends to derive a reasonable improvement in judgment criteria and propose an amendment to the relevant law through the establishment of a clear fire door replacement cycle in terms of fire safety.

  • PDF

형식 및 질적요소 체계분석을 통한 공동주택 하자감정서의 개선방안 (Improvement Plans on Defect Consulting Report in an Apartment Building through Analyzing on Formal Index and Quantitative Index)

  • 박준모;서덕석
    • 한국건축시공학회지
    • /
    • 제14권3호
    • /
    • pp.195-206
    • /
    • 2014
  • 공동주택의 하자감정과 관련된 다양한 문제점에 대한 개선을 하기 위하여, 본 연구에서는 선행연구와 관련기준 등을 분석하여 하자감정서의 분석체계를 마련하였다. 이를 활용하여 하자감정서 24건을 분석하였고 형식 요소와 질적 요소를 검토한 결과, 형식 요소의 경우 구성을 다소 변경하는 수준으로 손쉬운 대안을 제안하였다. 질적 요소를 분석한 결과, 감정인에 대한 평가제도와 참여기술자에 대한 전문교육제도의 마련을 통해 하자감정의 내실화를 강화할 수 있을 것으로 기대된다.

건설사와 입주민의 공동주택 하자분쟁 쟁점 및 개선 방안 (Major Issues and Improvement Measures for Disputes between Construction Companies and Residents Related to Defects in Multi-Family Housing Complexes)

  • 방홍순;김옥규
    • 한국건축시공학회지
    • /
    • 제22권1호
    • /
    • pp.103-114
    • /
    • 2022
  • 입주민은 육안으로 구별이 되는 하자를 중심적으로 보며, 건설사는 공동 주택의 구조적, 기능적 문제에 영향이 가는 하자를 중심적으로 본다. 그에 따라, 건설사와 입주민은 공동주택의 하자를 기준으로 서로 다른 관점을 가지고 있다. 이를 해결하기 위해 본 연구에서는 서로 다른 하자의 관점차이로 인하여 발생하는 공동주택 하자분쟁의 쟁점과 개선 방안을 목표로 진행하였다. 먼저, 국토교통부와 법원의 서로 다른 하자판정기준 및 보수기준을 분석하였다. 과거 청구소송 하자판결 사례분석을 통하여 문제점을 도출 하였으며, 여러 건설사의 하자 데이터를 기반으로 건설사와 입주민의 관점차이를 도출 하였다. 이를 해결하기 위해 공동주택 하자 데이터베이스의 개선방안을 제안하였다.

Effect of hysteretic constitutive models on elasto-plastic seismic performance evaluation of steel arch bridges

  • Wang, Tong;Xie, Xu;Shen, Chi;Tang, Zhanzhan
    • Earthquakes and Structures
    • /
    • 제10권5호
    • /
    • pp.1089-1109
    • /
    • 2016
  • Modified two-surface model (M2SM) is one of the steel elasto-plastic hysteretic constitutive models that consider both analysis accuracy and efficiency. However, when M2SM is used for complex strain history, sometimes the results are irrational due to the limitation of stress-strain path judgment. In this paper, the defect of M2SM was re-modified by improving the judgment of stress-strain paths. The accuracy and applicability of the improved method were verified on both material and structural level. Based on this improvement, the nonlinear time-history analysis was carried out for a deck-through steel arch bridge with a 200 m-long span under the ground motions of Chi-Chi earthquake and Niigata earthquake. In the analysis, we compared the results obtained by hysteretic constitutive models of improved two-surface model (I2SM) presented in this paper, M2SM and the bilinear kinematic hardening model (BKHM). Results show that, although the analysis precision of displacement response of different steel hysteretic models differs little from each other, the stress-strain responses of the structure are affected by steel hysteretic models apparently. The difference between the stress-strain responses obtained by I2SM and M2SM cannot be neglected. In significantly damaged areas, BKHM gives smaller stress result and obviously different strain response compared with I2SM and M2SM, and tends to overestimate the effect of hysteretic energy dissipation. Moreover, at some position with severe damage, BKHM may underestimate the size of seismic damaged areas. Different steel hysteretic models also have influences on structural damage evaluation results based on deformation behavior and low cycle fatigue, and may lead to completely different judgment of failure, especially in severely damaged areas.