• Journal of Broadcast Engineering
• /
• v.6 no.1
• /
• pp.41-49
• /
• 2001

Digital watermarking has been proposed for copyright protection of digital data. According to the property of an embedded watermark, it is classified into two categories, robust watermarking and fragile watermarking. The former is used for copyright protection, and the latter applies to the authentication/integrity to verify the authenticity of data, If an Image has been modified or forged. the embedded watermark cannot be extracted from the Image. As a results, it is possible to defect the modification of the image. As pixels are represented by tilts, the modification of bits corresponds to the alteration of the image. In this paper, a new fragile watermarking is proposed In which two watermarks are embedded in order to detect some modification occurred In high and low bit Planes. From simulation results, the embedded watermark is Invisible in a watermarked image and we can locale some Places where the modification occurring

• Industrial Engineering and Management Systems
• /
• v.7 no.3
• /
• pp.214-227
• /
• 2008

Today's dynamic competitiveness requires an organization to improve its performance measurement and management. Quality Management Systems (QMS) abound, the main ones being: ISO series, Malcolm Baldridge National Quality Award (MBNQA), European Forum for Quality Management (EFQM), Six Sigma Business Scorecard and the Balanced Scorecard. Based on the literature, the IPMMM (Integrated Performance Measurement and Management Model) identified 7 key synthesized factors: leadership, strategy management and policy, customer and market, learning and growth, partnership and resources, internal processes and business results that are employed to investigate the key performance indicators of a car assembler using the Delphi methodology. In the 2 rounds of Delphi panels consisting of 20 senior management personnel, the $1^{st}$ round of 198 indicators in the IPMMM yielded 90 indicators. The $2^{nd}$ round yielded 43 performance indicators with 18 rated as critical based on the % assigned in the $1^{st}$ and $2^{nd}$ priority rating of "very important factor" and "key performance indicator" that must be ranked high on both of the priorities. The very critical indicators appeared to be: defect percentage and first time capability (tie in $1^{st}$ place) and revenue, goal setting, customer satisfaction index, on-time delivery, brand image, return on investment, Claim Occurrence Ratio, and debt being ranked from $3^{rd}$ to $10^{th}$. It can be surmised that an organization can identify and develop an appropriate set of performance indicators through the Delphi methodology and implement and manage them based on the Balanced Scorecard.

• Journal of the Korean Society for Heat Treatment
• /
• v.28 no.6
• /
• pp.315-321
• /
• 2015

Friction stir processing (FSP) was applied to fabricate AZ31/CNT (Carbon Nano Tube) surface composite for improvement of surface hardness of AZ31 Mg-based alloy. The effects of traverse speed of rotating tool and volume fraction of CNT (i.e., groove depth of 3 mm and 4 mm) on the soundness and hardness of the composite layer were investigated. Multi-walled CNTs were fully filled in a machined groove and stirring tool was rotated at the speed of 1400 rpm. Only under the tool traverse speed of 25 mm/min for the specimen with a groove depth of 3 mm, surface composite layer with no defect was successfully produced. Increased hardness of about 35% was observed in the composite layer.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.2
• /
• pp.167-178
• /
• 2000

Software RAID(Redundant Arrays of Inexpensive Disks) is defined as a storage system that provides capabilities of hardware RAID, and guarantees high reliability as well as high performance. In this paper, we propose an enhanced disk scheduling algorithm and a scheme to guarantee reliability of data. We also design and implement software RAID by utilizing these mechanism to develop a storage system for multimedia applications. Because the proposed algorithm improves a defect of traditional GSS algorithm that disk I/O requests arc served in a fixed order, it minimizes buffer consumption and reduces the number of deadline miss through service group exchange. Software RAID also alleviates data copy overhead during disk services by sharing kernel memory. Even though the implemented software RAID uses the parity approach to guarantee reliability of data, it adopts different data allocation scheme. Therefore, we reduce disk accesses in logical XOR operations to compute the new parity data on all write operations. In the performance evaluation experiments, we found that if we apply the proposed schemes to implement the Software RAID, it can be used as a storage system for small-sized video-on-demand servers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.425-431
• /
• 1999

We develope plasma monitoring system which detect plasma signals and store them for Laser welding quality evaluation and analysis using photo detector. The most fundamental and important aspects in such a system are signal restoration fidelity, noise immunity and noise cancelation capability. In this paper, we propose implementation method using distribute processing structure and hybrid digital communication for high noise cancelation capability, immunity and signal fidelity which are poorly presented in other researches. Lab experimental results and welding experimental results show a effectiveness of proposed method and plasma data is stored with 256 kbps without any communication error. we are implementing various welding defect recognition algorithm in this system.

• Transactions of Materials Processing
• /
• v.27 no.5
• /
• pp.289-295
• /
• 2018

The profile ring rolling process can realize various ring shapes unlike conventional rectangular cross-sectional ring products. In this paper, the defective groove in the bottom surface of L-shaped ring products was analyzed. Grooves are generated by non-uniform external forces due to profile main roll and initial blank shape. Process parameters such as the motion of dies and working temperature were determined. Mechanism of groove formation was analyzed by FE simulation on the basis of local external forces acting on the blank. Analysis results were similar to the groove actually occurring in the production line. Based on results of the analysis, two solutions were proposed for the groove. The position of the base plate supporting the blank was adjusted and edge length of the main roll was extended to suppress growth of grooves. It has been verified that groove was improved by applying two proposed methods in the shop-floor.

• Journal of IKEEE
• /
• v.18 no.1
• /
• pp.64-76
• /
• 2014

In the image acquisition tests of image sensors and modules, how to compare pixel values, how to digitize "defect", and how to determine "fault" are extremely varied from test equipments. Therefore, setup of test equipments for image acquisition characteristics should be customized for target devices under test. In general, test procedures are delivered as technical documents in not standardized but arbitrary formats. So test equipment should be manually programmed fitting individual setup condition. This costs huge time and effort and has high risk of human error. In this paper, the standardized description method is proposed to apply to almost all existing tests where various tests are described in a single framework.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.424-427
• /
• 2016

A microwave NDI(Nondestructive Inspecting) method, based on SAR(Synthetic Aperture Radar) for inspecting such internal flaws or physical demage of FRP(Fiber Reinforced Polymer), is proposed in this paper. When a microwave is incident perpendicularly toward a multilayer dielectric FRP material, it gives a good response for the interfaces or transverse cracks. Interface depths or defect positions can be presented from the reflection waves, as using SAR imagery technique. As a result, it can be shown that such a SAR system can effectively inspect the type, size, or location of flaws within FRP composite material.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.697-703
• /
• 2008

Excessive water leakage phenomenon happens through damage of nation core zone of about 17,000 storage of water facilities or collapse of dam is worried, is being damaged or enforce dilapidated fill dam core zone's repair reinforcement. Example that use grouting method of construction considering construction and economic performance etc. recently by repair reinforcement way about defect of dam is increased. Permeation grouting method repair & reinforcement of fill dam countermeasure is preferred in nation. Do that is economical to decide these repair reinforcement effect and grouting effect estimation method that do not give damage to dam is effective. Therefore, observing electricity resistivity Survey change of dam since grouting reinforcement using Electric resistivity Survey inquiry of seismic survey method in this research, Wished to verify grouting effect whether is possible as Electric resistivity Survey, and study whether integrity of dam through repair reinforcement defined.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.805-807
• /
• 2011

In this paper, we propose a method to inspect defects of injection molded automotive parts. In order to inspect them, we developed and used a line detection algorithm and a defect analysis algorithm. The line detection algorithm defines center point of a laser line and the inspection algorithm determines the defects of automotive parts using pattern data of inspected objects and the data results from the line detection algorithm. We evaluated the accuracy and the processing time of inspection and they showed good performance.