• 제목/요약/키워드: defect determination criteria

검색결과 9건 처리시간 0.02초

도장공사 하자판정기준 개선 및 방화문 교체 주기 설정에 관한 법령 개정안 제안 연구 (A Study on the Proposal of Amendment of Laws and Regulations on the Improvement of Defect Determination Criteria for Painting Work and the Establishment of Replacement Cycle for Fire door)

  • 김수연;권영진;김윤성;오상근
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 가을 학술논문 발표대회
    • /
    • pp.95-96
    • /
    • 2022
  • Based on the analysis of defects occurring before and after painting work, this study intends to derive a reasonable improvement in judgment criteria and propose an amendment to the relevant law through the establishment of a clear fire door replacement cycle in terms of fire safety.

  • PDF

공동주택 층간균열의 하자판정 및 보수공법 적용에 대한 개선방안 (Improvement Measures for the Defect Determination and the Application of Repair Method for Interlayer Cracks in Apartment Houses)

  • 최상진;신만중
    • 한국건설관리학회논문집
    • /
    • 제23권5호
    • /
    • pp.23-33
    • /
    • 2022
  • 공동주택의 하자소송 금액에서 가장 많은 비율을 차지하고 있는 균열하자는 하자판정 기준이 명확하지 않아 판결에 따라 하자에 관한 판단이 엇갈리고 있다. 균열하자 판결금액 대부분을 차지하는 층간균열은 균열의 폭이나 상태와 관계없이 모두 하자로 판정되는 추세이며, 보수공법 또한 대부분 일률적으로 정해지고 있다. 이는 균열하자 판정의 기준이 되는 국토교통부의 하자판정기준과 법원에서 기준을 삼는 건설감정실무의 기준이 일치하는 않는 문제에서 출발한다. 법령의 개정과 법원감정실무지침서의 개정 등을 통해 모든 이해관계자가 적용할 수 있는 하자판정 기준의 수립이 필요하다. 또한, 층간균열 보수공법 기준은 층간균열의 폭과 상태에 따라 공법을 적용할 필요성이 있다. 균열에 대한 하자판정과 보수공법적용을 합리화한다면 소송에만 의존하는 현재의 하자분쟁 추세를 바꿀 수 있는 계기가 될 수 있을 것이다.

조경공사 하자에 관한 전문가 집단간 인식분석을 통한 개선방안 연구 (A Study on the Improvement Plan through Analyzing the Perception of Expert Group about Landscape Construction Defects)

  • 이상석;유주은
    • 한국조경학회지
    • /
    • 제40권4호
    • /
    • pp.104-113
    • /
    • 2012
  • 본 연구는 조경공사 관련 분야에 종사하는 전문가집단을 대상으로 조경공사 하자실태 및 하자에 대한 인식을 알아보고자 전문가들의 조경하자에 대한 하자경험, 하자책임, 하자기간, 하자보수이행 등을 조사분석하였다. 주요 결과는 다음과 같다. 1. 하자경험에 관한 사항으로 하자이행에 따른 문제에 대해서 발주기관은 하자문제를 보통정도로 인식하는 반면, 조경건설업체는 하자문제를 심각하게 받아들이고 있었다. 또한 하자보수 시 최우선 고려사항에 대해 발주기관은 하자발생의 원인규명을 중요시 하는 반면 조경건설업체는 하자보수 공사비용을 가장 우선시하고 있었다. 2. 하자책임에 관한 사항으로 먼저 하자책임에 대한 이견의 이유에 대해 발주기관은 하자원인에 대한 정확한 분석 및 처리기준의 부재를 이유로 들었으며, 조경건설업체는 발주자(사용자)의 유지관리 책임의식의 부재를 이유로 보고 있었다. 하자이행을 위한 적합한 방법에 대한 의견으로 발주기관은 객관적인 하자판정 및 처리기준을 따른다고 하였으며, 조경건설업체는 하자 원인을 파악하고 원인자 부담원칙에 의해 분담처리를 해야 한다는 의견을 보였다. 3. 하자기간에 관한 사항으로 먼저 하자담보책임기간 2년에 대한 의견은 발주기관의 경우, 2년을 적정하다고 보는 반면 조경건설업체는 길다고 인식하고 있었다. 또한 하자담보책임기간 시점으로 적합한 시기에 대해서 발주기관은 공사의 전체 준공시점으로 보고 있는 반면, 조경건설업체는 공종별 종료시점을 적당하다고 보고 있어 의견차를 보이고 있었다. 4. 하자이행에 관한 사항으로 먼저 하자담보책임의 제도개선 방안으로 발주기관은 객관적인 하자 판정 및 처리기준수립을, 조경건설업체는 조경공사 유지관리비 반영을 최우선으로 선택하였다. 또한 하자이행을 위해 하자 판정 및 처리기준 제정 시 중요사항으로 발주기관은 객관적인 하자 여부 판정기준을, 조경건설업체는 발주처 및 사용자의 유지관리 방법 및 책임 명시를 각각 중요사항으로 꼽아 의견 차이를 보이고 있었다. 본 연구 결과, 조경공사 하자처리전문기관이 없고 하자판정 및 처리기준과 하자이행체계가 미비하므로 합리적인 하자 처리전문기관을 만들고, 객관적인 판정 및 처리기준의 수립이 필요하다.

타격음을 이용한 복합재료 구조물의 비파괴 검사법 개발 (Development of Non-destructive Evaluation Method for Composite Structures using Tapping Sound)

  • 황준석;김승조
    • Composites Research
    • /
    • 제17권1호
    • /
    • pp.1-9
    • /
    • 2004
  • 본 연구에서는 타격음을 이용한 비파괴 검사법을 제안하였다. 제안된 방법(tapping sound analysis)은 건강한 구조물과 손상된 구조물의 타격음의 차이를 분석하여 구조물의 손상 유무를 판단하는 방법이다. 타격음의 직접적인 비교는 비효율적이므로 타격음으로부터 특성을 추출하기 위해 wavelet packet transform에 기반한 특성추출법을 제안하였다. 또한 추출된 특성 자료를 바탕으로 손상의 유무를 판단하는 지표로서 특성 지수를 정의하였다. 제안된 방법의 타당성을 밝히기 위해 실험적인 검증을 수행하였다. 복합재료를 이용하여 건강한 구조물과 손상된 구조물을 제작하고 타격음을 측정하였다. 제안된 손상 판단 기법을 이용한 결과로부터 특성 지수에 의한 손상 판단의 타당성을 밝혔다.

하수관로의 면단위 및 선단위 정비 우선순위 결정을 위한 AHP-PROMETHEE기법의 적용 (Application of AHP-PROMETHEE to determine areal and linear priorities for sewer rehabilitation projects)

  • 안호성;유순유;이태훈;박규홍
    • 상하수도학회지
    • /
    • 제34권4호
    • /
    • pp.289-301
    • /
    • 2020
  • Since sewer rehabilitation program requires long construction period and enormous capital investment, determination of rehabilitation priorities is important with systematic planning considering appropriate evaluation parameters. In this research, we applied PROMETHEE(Preference Ranking Organization METHod for Evaluations) known as very objective and scientific multi-criteria decision-making analysis, using the weights determined by AHP(Analytic Hierarchy Process) for the selected sewer evaluation items to calculate the rehabilitation priorities for each sewer sub-catchment in basin Gusan 1 of Seoul. Preference functions and preference thresholds were estimated for each criterion of ratio of lack of hydraulic capacity of sewers, defect ratio, ratio of sewers with velocity less than its minimum criteria, and density of sewers in the sub-catchment. As a result, it was found that region d had the first priority among four sub-catchments. For each and every sewer located in region d, we could also rank sewers to be rehabilitated urgently.

영상처리에 의한 계란의 파란 검출 및 선별 (Crack Detection and Sorting of Eggs by Image Processing)

  • 조한근;권양;조상구
    • 한국가금학회지
    • /
    • 제22권4호
    • /
    • pp.233-238
    • /
    • 1995
  • A computer vision system was built to generate images of a single, stationary egg. This system includes a CGD camera, a frame grabber, and incandescent back lighting system. Image processing algorithms were developed to inspect egg shell and to sort eggs. Those values of both gray level and area of dark spots in the egg image were used as criteria to detect holes in egg and those values of both area and roundness of dark spots in the egg image were used to detect cracks in egg. For a sample of 300 eggs, this system was able to correctly analyze an egg for the presence of a defect 97.5% of the time. The weights of eggs were found to be linear to both the projected area and the perimeter of eggs viewed from above. Those two values were used as criteria to sort eggs. The coefficients of determination(r$^2$) for the regression equations between weights and those two values were 0.967 and 0.972 in the two sets of experiment. Accuracies in grading were found to be 95.6% and 96.7% as compared with results from sizing by electronic weight scale.

  • PDF

전.후방 압출품의 냉간단조 공정설계 (Process Design in Cold Forging of the Backward and Forward Extruded Part)

  • 민규식;최종웅;최재찬;김병민;조해용
    • 한국정밀공학회지
    • /
    • 제14권8호
    • /
    • pp.57-64
    • /
    • 1997
  • The process design of backward and forward extrusion of axisymmetric part has been studied in this paper. The important factors of cold forging process with complex geometry are the design of initial billet shape, the possibility of forming by one-stage operation and the determination of preform shapes, etc. Based on the systematic procedure of process sequence design, the forming operation of cold forged part is analyzed by the commercial finite element program, DEFORM. The design criteria are forming load, geo- metrical filling without defect and a sound distribution of effective strain in final product. It is noted that one step of preform operation is required to obtain the final product. Numerical result is compared with experi- mental one. It is found that the analyzed result is in good agreement with actual forming result.

  • PDF

공동주택 욕실의 타일배면 뒤채움 피착면적에 따른 부착안정성 평가 (Evaluation of the Adhesion Stability According to the Backfilling Area of the Tile back of the Bathroom of an Apartment House)

  • 김범수;송제영;오상근
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 봄 학술논문 발표대회
    • /
    • pp.14-15
    • /
    • 2021
  • Recently, the size of tiles used for bathroom walls in apartment houses is gradually increasing in size. The problem is that when these large-sized tiles are attached by the sticking method, due to the nature of the method, there is a concern about the stability of the attachment to the part (pupil) where the tile and the adhesive are not attached. The problem is serious as it leads to lawsuits in the outbreak court. In addition, it is urgent to verify the adhesion stability of the sticking method because secondary damage occurs due to a safety accident caused by the falling of the tile. Ministry of Land, Infrastructure and Transport [Investigation of defects in apartment houses, calculation of repair cost and defect determination criteria] ① The tile adhesion strength is 0.39N/mm2 or more and ② It is specified to fill 80% or more of the base area of the tile backside, but this is currently trendy. It is considered that large-sized tiles need to be verified from multiple angles, and as part of that, we intend to verify the adhesion stability according to the area to be attached to large-sized tiles.

  • PDF

영공(領空)과 우주공간(宇宙空間)의 한계(限界)에 관한 법적(法的) 고찰(考察) ("Legal Study on Boundary between Airspace and Outer Space")

  • 최완식
    • 항공우주정책ㆍ법학회지
    • /
    • 제2권
    • /
    • pp.31-67
    • /
    • 1990
  • One of the first issues which arose in the evolution of air law was the determination of the vertical limits of airspace over private property. In 1959 the UN in its Ad Hoc Committee on the Peaceful Uses of Outer Space, started to give attention to the question of the meaning of the term "outer space". Discussions in the United Nations regarding the delimitation issue were often divided between those in favour of a functional approach ("functionalists"), and those seeking the delineation of a boundary ("spatialists"). The functionalists, backed initially by both major space powers, which viewed any boundary as possibly restricting their access to space(Whether for peaceful or military purposes), won the first rounds, starting with the 1959 Report of the Ad Hoc Committee on the Peaceful Uses of Outer Space which did not consider that the topic called for priority consideration. In 1966, however, the spatialists, were able to place the issue on the agenda of the Outer Sapce Committee pursuant to Resolution 2222 (xxx1). However, the spatialists were not able to present a common position since there existed a variety of propositions for delineation of a boundary. Over the years, the funtionalists have seemed to be losing ground. As the element of location is a decisive factor for the choice of the legal regime to be applied, a purely functional approach to the regulation of activities in the space above the Earth does not offer a solution. It is therefore to be welcomed that there is clear evidence of a growing recognition of the defect inherent to such an approach and that a spatial approach to the problem is gaining support both by a growing number of States as well as by publicists. The search for a solution of the problem of demarcating the two different legal regimes governing the space above the Earth has undoubtedly been facilitated, and a number of countries, among them Argentina, Belgium, France, Italy and Mexico have already advocated the acceptance of the lower boundary of outer space at a height of 100km. The adoption of the principle of sovereignty at that height does not mean that States would not be allowed to take protective measures against space activities above that height which constitute a threat to their security. A parallel can be drawn with the defence of the State's security on the high seas. Measures taken by States in their own protection on the high seas outside the territorial waters-provided that they are proportionate to the danger-are not considered to infringe the principle of international law. The most important issue in this context relates to the problem of a right of passage for space craft through foreign air space in order to reach outer space. In the reports to former ILA Conferences an explanation was given of the reasons why no customary rule of freedom of passage for aircraft through foreign territorial air space could as yet be said to exist. It was suggested, however, that though the essential elements for the creation of a rule of customary international law allowing such passage were still lacking, developments apperaed to point to a steady growth of a feeling of necessity for such a rule. A definite treaty solution of the demarcation problem would require further study which should be carried out by the UN Outer Space Committee in close co-operation with other interested international organizations, including ICAO. If a limit between air space and outer space were established, air space would automatically come under the regime of the Chicago Convention alone. The use of the word "recognize" in Art. I of chicago convention is an acknowledgement of sovereignty over airspace existing as a general principle of law, the binding force of which exists independently of the Convention. Further it is important to note that the Aricle recognizes this sovereignty, as existing for every state, holding it immaterial whether the state is or is not a contracting state. The functional criteria having been created by reference to either the nature of activity or the nature of the space object, the next hurdle would be to provide methods of verification. With regard to the question of international verification the establishment of an International Satelite Monitoring Agency is required. The path towards the successful delimitation of outer space from territorial space is doubtless narrow and stony but the establishment of a precise legal framework, consonant with the basic principles of international law, for the future activities of states in outer space will, it is still believed, remove a source of potentially dangerous conflicts between states, and furthermore afford some safeguard of the rights and interests of non-space powers which otherwise are likely to be eroded by incipient customs based on at present almost complete freedom of action of the space powers.

  • PDF