• 한국표면공학회지
• /
• 제36권2호
• /
• pp.141-147
• /
• 2003

Silicon carbide thin film was deposited in APCVD and LPCVD system with 1,3-DSB precursor 1,3-DSB is the single precursor to deposit SiC on Si at low temperature. SiC film was deposited at $850^{\circ}C$ lower than ordinary temperature ($1000~1200^{\circ}C$) in CVD process. SiC thin film glowed to high oriented (111) plane in APCVD system. In LPCVD system, SiC film groved to preferred (220) plane at same temperature. This discrepancy between preferred planes can be described by the difference of deposition mechanism. Amorphous phase and crystal defect were observed in APCVD system with the main growth mechanism of mass transport limited region. But in LPCVD system, we got the SIC film of uniform, faceted structure and high quality.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권4호
• /
• pp.770-783
• /
• 2015

Lately, high production rate welding processes for Al alloys, which are used as LNG FPSO cargo containment system material, have been developed to overcome the limit of installation and high rework rates. In particular, plasma-metal inert gas (MIG) hybrid (PMH) welding can be used to obtain a higher deposition rate and lower porosity, while facilitating a cleaning effect by preheating and post heating the wire and the base metal. However, an asymmetric undercut and a black-colored deposit are created on the surface of PMH weld in Al alloys. For controlling the surface defect formation, the wire feeding speed and nozzle diameter in the PMH weld was investigated through arc phenomena with high-speed imaging and metallurgical analysis.

• 한국표면공학회지
• /
• 제48권3호
• /
• pp.126-130
• /
• 2015

A high-pressure depletion method using plasma chemical vapor deposition (CVD) is often used to deposit hydrogenated microcrystalline silicon (${\mu}c-Si:H$) films of a low defect density at a high deposition rate. To understand proper deposition conditions of ${\mu}c-Si:H$ films for a high-pressure depletion method, Si films were deposited in a combinatorial way using a multi-hollow discharge plasma CVD method. In this paper the substrate temperature dependence of ${\mu}c-Si:H$ film properties are demonstrated. The higher substrate temperature brings about the higher deposition rate, and the process window of device quality ${\mu}c-Si:H$ films becomes wider until $200^{\circ}C$. This is attributed to competitive reactions between Si etching by H atoms and Si deposition.

• Clinics in Shoulder and Elbow
• /
• 제27권2호
• /
• pp.263-266
• /
• 2024

We present a case of calcific tendinitis in the shoulder, where calcifications were observed within both the tendon and the adjacent bone. At the time of acute onset, radiographs (including a plain radiograph) and magnetic resonance imaging revealed calcific tendinitis with intraosseous migration. The patient's symptoms did not improve after 5 months of conservative treatment. The patient underwent arthroscopic debridement of the calcific deposits, and the defect was repaired using the double-row repair technique. The patient's symptoms improved 3 months after arthroscopic treatment. We share our unusual experience with arthroscopic debridement in the treatment of chronic calcific tendinitis with intraosseous migration.

• 전기화학회지
• /
• 제4권2호
• /
• pp.41-46
• /
• 2001

황산과 황산구리 수용액을 전해질로 사용하여 다공성 그물구조 금속을 전기화학적으로 제조하였으며, 이때 균질 전착에 영향을 미치는 첨가제 PEG, MPS의 영향에 대해 살펴보았다. 분극실험과 기공의 평균 직경이 $250{\mu}m$의 그물구조 전극을 여러장 적층하여 throwing power를 정량화 한 결과, PEG의 경우 분극 초기에 전극에서 탈착됨으로써 오히려 throwing power를 감소시키고 MPS는 500ppm까지 용액 중 첨가량의 증가와 함께 throwing power를 향상시키는 결과를 보였다 또한 MPS와 PEG가 동시에 혼합된 용액에서는 MPS의 효과가 우선적으로 나타나며 PEG의 효과는 무시할 정도였다 그러나 MPS의 첨가는 전착층의 균열을 유도하여 기계적 강도에 좋지 못한 영향을 미치며 균열을 피하려면 50ppm 이하가 적정함을 SEM 관찰을 통해 확인할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.121-121
• /
• 2000

반도체 산업의 발달에 따라 소자의 보다 빠른 동작 속도와 큰 집적도를 갖은 ULSI 구조를 얻기 위해, 새로운 금속배선 재료가 요구되고 있다. 기존의 금속 배선인 Al 및 Al 합금은 비교적 낮은 비저항과 박막형성의 용이함으로 인하여 현재까지 금속배선 재료로 사용되고 있으나, 고집적화에 따라 RC Time Delay와 Electromigration의 문제점을 들어내었다. 이러한 문제를 해결할 새로운 배선 재료로 Al보다 낮은 비저항을 가지며, electromigration 저항성을 갖는 Cu 금속배선 재료가 활발히 연구되고 있다. 본 실험에서는 (100) Si 웨이퍼를 기판으로 사용하였으며, 각층은 SiO2/Si3N4/EP Cu/Seed Cu/ TaN/SiO2/Si wafer 상태로 증착하였다. 확산방지막으로 TaN을 사용하였고, seed Cu는 sputtering 으로 증착하였으며, seed Cu 만으로 된 박막과 seed Cu + electro plating Cu로 구성된 박막을 제작하였다. 제작 완료된 박막은 N2 분위기에서 20$0^{\circ}C$ 120 min, 45$0^{\circ}C$ 60min 동안 열처리하여 Cu 박막의 조직 변화를 TEM 및 여러 분석방법을 이용하여 분석하였다. Plan-view TEM결과, 45$0^{\circ}C$, 60min 열처리함에 따라 결정립 성장이 일어난 것을 확인 할 수 있었다. 그러나, 성장후에도 twin boundary, stacking fault, dislocation, small defect 등은 여전히 남아 있음이 관찰된다. 그림 1(a)는 as-deposit 상태이며, 그림 1(b)는 45$0^{\circ}C$, 60min 열처리한 plan-view TEM 사진이다.

• 한국전기전자재료학회논문지
• /
• 제20권7호
• /
• pp.615-619
• /
• 2007

MgO layer plays an important role for plasma display panels (PDPs). In this experiment, ion beam assisted deposition (IBAD) methode was uesed to deposit a MgO thin film and the assisting oxygen ion beam energy was varied from 100 eV to 500 eV. In order to investigate the relationship between the secondary electron emission and the defect levels of the MgO layer, we measured the cathodoluminescence (CL) spectra of the MgO thin films, and we analyzed the CL peak intensity and peak transition. The results showed that the assisting ion beam energy played an important role in the peak intensity and the peak transition of the CL spectrum. The properties of MgO thin film were also analyzed using XRD and SEM, these results showed the assisting ion beam energy had direct effect on characteristics of MgO thin film.

• 한국재료학회지
• /
• 제21권4호
• /
• pp.192-195
• /
• 2011

The electro-deposition of compound semiconductors has been attracting more attention because of its ability to rapidly deposit nanostructured materials and thin films with controlled morphology, dimensions, and crystallinity in a costeffective manner (1). In particular, low band-gap $A_2B_3$-type chalcogenides, such as $Sb_2Te_3$ and $Bi_2Te_3$, have been extensively studied because of their potential applications in thermoelectric power generator and cooler and phase change memory. Thermoelectric $Sb_xTe_y$ films were potentiostatically electrodeposited in aqueous nitric acid electrolyte solutions containing different ratios of $TeO_2$ to $Sb_2O_3$. The stoichiometric $Sb_xTe_y$ films were obtained at an applied voltage of -0.15V vs. SCE using a solution consisting of 2.4 mM $TeO_2$, 0.8 mM $Sb_2O_3$, 33 mM tartaric acid, and 1M $HNO_3$. The stoichiometric $Sb_xTe_y$ films had the rhombohedral structure with a preferred orientation along the [015] direction. The films featured hole concentration and mobility of $5.8{\times}10^{18}/cm^3$ and $54.8\;cm^2/V{\cdot}s$, respectively. More negative applied potential yielded more Sb content in the deposited $Sb_xTe_y$ films. In addition, the hole concentration and mobility decreased with more negative deposition potential and finally showed insulating property, possibly due to more defect formation. The Seebeck coefficient of as-deposited $Sb_2Te_3$ thin film deposited at -0.15V vs. SCE at room temperature was approximately 118 ${\mu}V/K$ at room temperature, which is similar to bulk counterparts.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.157-157
• /
• 2015

Recently, the growing interest in organic microelectronic devices including OLEDs has led to an increasing amount of research into their many potential applications in the area of flexible electronic devices based on plastic substrates. However, these organic devices require a gas barrier coating to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency OLEDs require an extremely low water vapor transition rate (WVTR) of $1{\times}10^{-6}g/m^2day$. The Key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required ($1{\times}10^{-6}g/m^2day$) is the suppression of defect sites and gas diffusion pathways between grain boundaries. In this study NBAS process was introduced to deposit enhanced film density single gas barrier layer with a low WVTR. Fig. 1. shows a schematic illustration of the NBAS apparatus. The NBAS process was used for the $Al_2O_3$ nano-crystal structure films deposition, as shown in Fig. 1. The NBAS system is based on the conventional RF magnetron sputtering and it has the electron cyclotron resonance (ECR) plasma source and metal reflector. $Ar^+$ ion in the ECR plasma can be accelerated into the plasma sheath between the plasma and metal reflector, which are then neutralized mainly by Auger neutralization. The neutral beam energy is controlled by the metal reflector bias. The controllable neutral beam energy can continuously change crystalline structures from an amorphous phase to nanocrystal phase of various grain sizes. The $Al_2O_3$ films can be high film density by controllable Auger neutral beam energy. we developed $Al_2O_3$ high dense barrier layer using NBAS process. We can verified that NBAS process effect can lead to formation of high density nano-crystal structure barrier layer. As a result, Fig. 2. shows that the NBAS processed $Al_2O_3$ high dense barrier layer shows excellent WVTR property as a under $2{\times}10^{-5}g/m^2day$ in the single barrier layer of 100nm thickness. Therefore, the NBAS processed $Al_2O_3$ high dense barrier layer is very suitable in the high efficiency OLED application.