• 제목/요약/키워드: deceleration rate

검색결과 95건 처리시간 0.019초

설계일관성을 반영한 감가속도 프로파일 개발 - 지방부 다차로도로를 중심으로 - (Acceleration and Deceleration Profile Development of Reflecting Road Design Consistency)

  • 최재성;이종학;정상민;조원범;김상엽
    • 한국도로학회논문집
    • /
    • 제15권6호
    • /
    • pp.103-111
    • /
    • 2013
  • PURPOSES : Previous Speed Profile reflects the patterns of speeds in sections of tangents to curves in the roads. However these patterns are uniform of speeds and Acceleration/Deceleration. In oder to supplement these shortcomings. this study made a new profile which can contain factors of Acceleration/Deceleration through theories of Previous Speed Profiles. METHODS : For sakes, this study developed the speed prediction model of Rural Multi-Lane Highways and calculated Acceleration/Deceleration by appling a Polynomial model based on developed speed prediction model. Polynomial model is based on second by second. Acceleration/Deceleration Profile is developed with the various scenarios of road geometric conditions. RESULTS : The longer an ahead tangent length is, The higher an acceleration rate in curve occurs due to wide sight distance. However when there are big speed gaps between two curves, the longer tangent length alleviate acceleration rate. CONCLUSIONS : Acceleration/Deceleration Profile can overview th patterns of speeds and Accelerations/Decelerations in the various road geometric conditions. Also this result will help road designer have a proper guidance to exam a potential geometric conditions where may occur the acceleration/deceleration states.

도로 설계 지역 구분 (Area Identification for Road Design)

  • 김용석
    • 한국도로학회논문집
    • /
    • 제16권6호
    • /
    • pp.181-189
    • /
    • 2014
  • PURPOSES : Ambiguous decision on whether rural or urban area for road design can increase the construction cost and restrict the land use of surrounding area. However, administrative classification on rural and urban area is not directly related to road design because of this classification is not based on the engineering viewpoint, so method which can explain the road design context is required. METHODS : Method which enables to identify the area for road design is suggested based on the deceleration expected to be experienced by drivers who use the road section concerned. Deceleration rate corresponding to the area such as rural or urban suggested in Road Design Guideline is used as the criteria to identify the area by comparing this value with the estimated deceleration rate at the road section concerned. Speed profile method is utilized to derive the deceleration rate, and speed estimation way for reflecting both road geometry and intersection is suggested using stopping sight distance concept. RESULTS : The procedure of the method application is suggested, and the design example utilizing the method is provided. CONCLUSIONS : The method is expected to be used to identify the area for road design with engineering viewpoint, and design consistency among the roads with similar driving environment can be made.

교차로에서 운전자별 온실가스 발생 경향 (Greenhouse Gas Emission Patterns at Intersections by Drivers)

  • 이윤석;유혜민;오흥운
    • 한국도로학회논문집
    • /
    • 제15권4호
    • /
    • pp.147-154
    • /
    • 2013
  • PURPOSES: To analyze the specific factors of drivers behaviors that amount of cause the greenhouse gas emissions per vehicle. METHODS: Drivers behaviors at intersections are analyzed on the conditions of acceleration and deceleration. RESULTS : First, it is resulted greenhouse gas emissions per vehicle is produced more at intersections than at the main lines of highway. Second, it is resulted that the average speed, the average acceleration rate and the maximum speed are three major factors to produce greenhouse gas per vehicle in acceleration sections. Third, it is resulted that rapid deceleration 20m before entering intersections is the major factor to produce greenhouse gas per vehicle in deceleration sections. CONCLUSIONS: At intersections, sudden acceleration and deceleration is not good for greenhouse gas emissions. Thus, and the average speed, the average acceleration rate and the maximum speed are the chosen as factors to be controlled for drivers' behavior to reduce vehicles' greenhouse gas at intersections.

ESTIMATION AND SENSITIVITY OF GOMPERTZ PARAMETERS WITH MORTALITY DECELERATION RATE

  • PITCHAIMANI M.
    • Journal of applied mathematics & informatics
    • /
    • 제18권1_2호
    • /
    • pp.311-320
    • /
    • 2005
  • Studies in the evolutionary biology of aging require good estimates of the age-dependent mortality rate coefficient (one of the Gompertz parameters). In this paper we introduce an alternative algorithm for estimating this parameter. And we discuss the sensitivity of the estimates to changes in the other model parameters.

제동시 브레이크 소음 개선에 관한 연구 (A Study for the Improvement of the Brake Squeal Noise)

  • 김동우;이희욱
    • 한국자동차공학회논문집
    • /
    • 제4권6호
    • /
    • pp.223-228
    • /
    • 1996
  • The frequency of the brake squeal noise can be changed during braking, and this frequency shifting is due to variation of braking deceleration rate. The natural frequency of the brake system also shifted according to deceleration rate. It makes difficult to treat this problem. This paper shows an experimental study on the brake squeal noise having main frequencies of about 450~500Hz. And it shows how to improve the brake squeal noise problem.

  • PDF

신호교차로 황색현시에서의 운전자 형태 및 딜레마 구간 연구방안 (A Study on Driver Behavior and Dilemma Zone during Yellow Interval at Signalized Intersections)

  • 이승환;이성호;박주남
    • 대한교통학회지
    • /
    • 제21권4호
    • /
    • pp.7-16
    • /
    • 2003
  • 본 연구는 딜레마구간 제거를 위한 기초연구로서, 황색신호 등화시 신호교차로에 접근하는 차량들의 운전자 행태를 분석하는데 그 목적이 있다. 이를 위해 도시부 2개 지점(송탄, 수원 영통)과 지방부 1개 지점(용인)의 신호교차로를 대상으로 차량들의 정지 감속률과 운전자 인지반응시간, 그리고 딜레마 구간과 정지율과의 관계를 고찰하고 이를 바탕으로 신호교차로의 정지율과 이에 따른 딜레마구간의 범위를 도출하였다. 본 연구를 통해 우리나라 운전자들의 정지감속율과 운전자인지반응시간(PRT)은 각각 1.61m/sec$^2$과 1.27초를 보였다. 이러한 값들은 그동안 우리나라에서 사용되어왔던 ITE 기준보다 큰 값들로서 향후 신호교차로에서의 안전을 고려한 설계시 매우 중요하게 다루어야 할 것으로 보여진다. 또한 본 연구는 향후 조사 대상 범위를 더욱 확대하여 다양한 운전자 행태에 대한 자료를 수집하여 향후 신호교차로 안전시스템 개발시 적극 활용될 수 있으리라 판단된다.

High Cell Density Culture of Anabaena variabilis with Controlled Light Intensity and Nutrient Supply

  • Yoon, Jong-Hyun;Shin, Jong-Hwan;Ahn, Eun-Kyung;Park, Tai-Hyun
    • Journal of Microbiology and Biotechnology
    • /
    • 제18권5호
    • /
    • pp.918-925
    • /
    • 2008
  • Controlling the light energy and major nutrients is important for high cell density culture of cyanobacterial cells. The growth phase of Anabaena variabilis can be divided into an exponential growth phase and a deceleration phase. In this study, the cell growth in the deceleration phase showed a linear growth pattern. Both the period of the exponential growth phase and the average cell growth rate in the deceleration phase increased by controlling the light intensity. To control the light intensity, the specific irradiation rate was maintained above $10\;{\mu}mol/s/g$ dry cell by increasing the incident light intensity stepwise. The final cell density increased by controlling the nutrient supply. For the control of the nutrient supply, nitrate, phosphate, and sulfate were intermittently added based on the growth yield, along with the combined control of light intensity and nutrient concentration. Under these control conditions, both final cell concentration and cell productivity increased, to 8.2 g/l and 1.9 g/l/day, respectively.

A Study on the design of separation force measuring system for improvement of semiconductor productivity

  • Park, Kun-Jong
    • 한국컴퓨터정보학회논문지
    • /
    • 제22권10호
    • /
    • pp.1-7
    • /
    • 2017
  • In this paper, the separation force measuring system is developed. The separation force aries due to adhesive strength between semiconductor epoxy molding compound(EMC) and the metal plate in semiconductor formed plate. In general, when removing the metal plate in semiconductor formed plate from semiconductor epoxy molding compound, excessive strength can result in a increase in semiconductor defect rates, or conversely, if too little force is exerted on the metal plate in semiconductor formed plate, the semiconductor production rates can decrease. In this study, the design criteria for the selection of the AC servo motor, the role of the ball screw, the relationship between the load cell and the ball screw, and the rate of deceleration are given. In addition, minimizing the reject rate of semiconductors and maximizing the semiconductor production rate are achieved through the standardization of the collected separation force data measured by the proposed system.

Tractor-Semitrailer 차량의 제동특성 프로그램 개발 (A Simulation Program for the Braking Characteristics of Tractor-Semitrailer Vehicle)

  • 서명원;박윤기;권성진;양승환;박병철
    • 한국자동차공학회논문집
    • /
    • 제9권2호
    • /
    • pp.152-167
    • /
    • 2001
  • Recently safety systems for the commercial vehicle have been rapidly developed. However, we still have many problems in the vehicle stability and the braking performance. Especially, a commercial vehicle may meet a dangerous braking condition when the vehicle is lightly loaded or empty and when the road is wet or slippery. Under these conditions, the truck can spin out or the tractor can jackknife or the trailer can swing out. To design the air brake system for the commercial vehicle, since the air brake system has many design variables, there must have been intensive researches on a method how to prevent dynamic instability and how to maximize the vehicle deceleration. In this study, mathematical models about the tractor-semitrailer and the air brake system including an ABS controller have been constructed for computer simulation. Also, simple examples are applied to show the usefulness of the program. Designers can use this simulation program for understanding the braking characteristics such as trajectory, braking distance, longitudinal deceleration, lateral deceleration, and yaw rate on various road conditions.

  • PDF

Effects of traffic characteristics on pavement responses at the road intersection

  • Yang, Qun;Dai, Jingwang
    • Structural Engineering and Mechanics
    • /
    • 제47권4호
    • /
    • pp.531-544
    • /
    • 2013
  • Compared with pavement structures of ordinary road sections, pavement structures in the intersection are exposed to more complex traffic characteristics which may exacerbates pavement distresses such as fatigue-cracking, shoving, shear deformation and rutting. Based on a field survey about traffic characteristics in the intersection conducted in Shanghai China, a three dimensional dynamic finite-element model was developed for evaluating the mechanistic responses in the pavement structures under different traffic characteristics, namely uniform speed, acceleration and deceleration. The results from this study indicated that : (1) traffic characteristics have significant effects on the distributions of the maximum principal strain (MPS) and the maximum shear stress (MSS) at the pavement surface; (2) vehicle acceleration or deceleration substantially impact the MPS and MSS at pavement surface and could increase the magnitude of them by 20 percent to 260 percent; (3) in the vertical direction, with the increase of vehicle deceleration rate, the location of the MPS peak value and the MSS peak value changes from the sub-surface layer to the pavement surface.