DOI QR코드

DOI QR Code

Effects of traffic characteristics on pavement responses at the road intersection

  • Yang, Qun (Key Laboratory of Road and Traffic Engineering of the Ministry of Education, Tongji University) ;
  • Dai, Jingwang (Key Laboratory of Road and Traffic Engineering of the Ministry of Education, Tongji University)
  • 투고 : 2012.02.23
  • 심사 : 2013.08.16
  • 발행 : 2013.08.25

초록

Compared with pavement structures of ordinary road sections, pavement structures in the intersection are exposed to more complex traffic characteristics which may exacerbates pavement distresses such as fatigue-cracking, shoving, shear deformation and rutting. Based on a field survey about traffic characteristics in the intersection conducted in Shanghai China, a three dimensional dynamic finite-element model was developed for evaluating the mechanistic responses in the pavement structures under different traffic characteristics, namely uniform speed, acceleration and deceleration. The results from this study indicated that : (1) traffic characteristics have significant effects on the distributions of the maximum principal strain (MPS) and the maximum shear stress (MSS) at the pavement surface; (2) vehicle acceleration or deceleration substantially impact the MPS and MSS at pavement surface and could increase the magnitude of them by 20 percent to 260 percent; (3) in the vertical direction, with the increase of vehicle deceleration rate, the location of the MPS peak value and the MSS peak value changes from the sub-surface layer to the pavement surface.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Alshoaibi, A.M. (2010), "Finite element procedures for the numerical simulation of fatigue crack propagation under mixed mode loading", Structural Engineering and Mechanics, 35(3), 283-299. https://doi.org/10.12989/sem.2010.35.3.283
  2. Al-Qadi, I.L., Wang, H., Yoo, P.J. and Dessouky, S.H. (2009), "Dynamic analysis and insitu validation of perpetual pavement response to vehicular loading", Transportation Research Record: Journal of the Transportation Research Board, 2087, 29-39.
  3. Cebon, D. (1999), Handbook of Vehicle-Road Interaction, Swets&Zeitlinger Publishers.
  4. Dong, Z.J. and Sun, Z.J. er al. (2011), "Mechanism analysis of rutting ant urban intersections based on numerical simulation under moving vehicle loads", Advanced Materials Research, 152, 1192-1198.
  5. Elseifi, M.A., Al-Qadi, I.L. and Yoo, P.J. (2006), "Viscoelastic modeling and field validation of flexible pavement", Joural of Engineering Mechanics, 132(2), 172-178. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:2(172)
  6. Hernandez, J.A. (2010), "Evaluation of the response of perpetual pavement at accelerated pavement loading facility: finite element analysis and experimental investigation", Master dissertation, Ohio Uniyersity, Ohio.
  7. Hu, X.D. and Sun, L.J. (2006), "Mechanistic responses in asphalt pavement under different tyre types with different level loads", Journal of Tongji University, 34(1), 64-68.
  8. Hu, X.D. and Walubita. L.F. (2011), "Effects of layer interfacial bonding conditions on the mechanistic responses in asphalt pavements", Journal of Transportation Engineering, 137(1), 28-36. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000184
  9. Hutchinson. B.G., Rilett, L.R., Green, R. and Haas, R.C.G. (1989), "Axle load shifts during truck braking and their implications for bridge and pavement design", Canadian Journal of Civil Engineering, 16(2), 113-118. https://doi.org/10.1139/l89-026
  10. Jo, J.S., Jung, H.J. and Kim, H.J. (2008), "Finite element analysis of vehicle-bridge intersection by an interative method", Structural Engineering and Mechanics, 30(2), 165-176. https://doi.org/10.12989/sem.2008.30.2.165
  11. Lu, P.Z., Zhao, R.D. and Zhao, J.P. (2010), "EXpelimental and finite element studies of special-shap arch blidge for self-banlance", Structural Engineering and Mechanics, 35(1), 283-299. https://doi.org/10.12989/sem.2010.35.3.283
  12. MA, X., Guo, Z.Y. and Yang, Q. (2009), "3D finite element analysis on asphalt pavement dynamic response under moving load", Journal of Chong Qing Jiaotong University (Narural Science), 28(4), 702-707.
  13. Shan, J.S. er al. (2007), "Mechanistic responses in pavement structures considering moving load", Journal of Highway and Transportarion Research and Development, 24(1), 10-13.
  14. Siddharthan, R.Y., Yao, J. and Sebaaly, P.E. (1998), "Pavement strain from moving dynamic 3D load distribution", Journal of Transportation Engineering, 124(6), 557-566. https://doi.org/10.1061/(ASCE)0733-947X(1998)124:6(557)
  15. Siddharthan, R.V., Krishnamenon, N., El-Mously, M. and Sebaaly, P.E. (2002), "Investigation of tyre contact stress distribution on pavement response", Journal of Transportation Engineering, 128(2), 136-144. https://doi.org/10.1061/(ASCE)0733-947X(2002)128:2(136)
  16. Siddharthan, R.V., Yao, J. and Sebaaly, P.E. (1998), "Pavement strain from moving 3D load distribution", Journal of Transportation Engineering, 124(6), 557-566. https://doi.org/10.1061/(ASCE)0733-947X(1998)124:6(557)
  17. Tielking, J.T. and Roberts, A.M. (1987), "Tyre contact pressure and its effect on pavement strain", Journal of Transportation Engineering, 113(1), 56-71. https://doi.org/10.1061/(ASCE)0733-947X(1987)113:1(56)
  18. Wang, H. and Al-Qadi, I.L. (2009), "Combined effect of moving wheel loading and three-dimensional contact stress on perpetual pavement responses", Transportation Research Record: Journal of the Transportation Research Board, 2095, 53-61. https://doi.org/10.3141/2095-06

피인용 문헌

  1. Full-scale field testing on a highway composite pavement dynamic responses vol.4, 2015, https://doi.org/10.1016/j.trgeo.2015.05.002
  2. Effect of Panel Size and Radius of Relative Stiffness on Critical Stresses in Concrete Pavement vol.43, pp.10, 2018, https://doi.org/10.1007/s13369-018-3308-x
  3. Simplified approach for the evaluation of critical stresses in concrete pavement vol.61, pp.3, 2013, https://doi.org/10.12989/sem.2017.61.3.389