• 제목/요약/키워드: decaying

검색결과 359건 처리시간 0.027초

PID 제어기를 이용한 확장 적분 제어 (Extended Integral Control with the PID Controller)

  • 문영현;정기영;류헌수;송경빈
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 C
    • /
    • pp.1063-1066
    • /
    • 1999
  • This paper presents an extended integral control with the PID controller by introducing the delay and decaying factors. The convolution integral control scheme is developed by substituting proportional convolution integral controls for the proportional-integral control. So far, the integral part of the PI controller produces a signal that is proportional to the time integral of the input of the controller. The steady-state operation points are affected forever by the errors in the past due to the input signal containing the information of the errors in the past. These phenomina may cause some disturbances for other control purposes related to the given PI control. Introduction of forgetting factors of the error in the past can resolve the disturbance problems. Various forgetting factors are developed using the delay, the decaying factors, and the combination of the delay and the decaying factors. The proposed various extended integral control schemes can be applicable to corresponding PI control designs in which the error in the past may badly affect to the current steady-state operation points and may cause some disturbances for other control purposes.

  • PDF

속도미분비대칭도를 고려한 초기난류 속도장 생성방법 연구 (A Study on the Generation of Initial Turbulent Velocity Field with Non-zero Velocity Derivative Skewness)

  • 고범용;박승오
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2002년도 학술대회지
    • /
    • pp.819-822
    • /
    • 2002
  • It is necessary for the numerical simulation of 3-dimensional incompressible isotropic decaying turbulence to construct 3-dimensional initial velocity field which resembles the fully developed turbulence. Although the previous velocity field generation method proposed by Rogallo(1981) satisfies continuity equation and 3-dimensional energy spectrum, it has limitation, as indicated in his paper, that it does not produce the higher velocity moments(e. g. velocity derivative skewness) characteristic of real turbulence. In this study, a new velocity field generation method which is able to control velocity derivative skewness of initial velocity field is proposed. Brief descriptions of the new method and a few parameters which is used to control velocity derivative skewness are given. A large eddy simulation(LES) of isotropic decaying turbulence using dynamic subgrid-scale model is carried out to evaluate the performance of the initial velocity field generated by the new method. It was shown that the resolved turbulent kinetic energy decay curve and the resolved enstrophy decay curve from the initial field of new method were more realistic than those from the initial field of Rogallo's method. It was found that the dynamic model coefficient from the former was initially half the stationary value and experienced relatively short transition period, though that from the latter was initially zero and experienced relatively longer transition period.

  • PDF

지수 감쇄하는 DC 옵셋 영향을 제거한 푸리에 변환 기반 페이져 연산 기법 기법 (Fourier Transform-Based Phasor Estimation Method Eliminating the Effect of the Exponentially Decaying DC offsets)

  • 이동규;김철훈;강상희
    • 전기학회논문지
    • /
    • 제57권9호
    • /
    • pp.1485-1490
    • /
    • 2008
  • This paper proposes a new Fourier transform-based phasor estimation method to eliminate the adverse influence of the exponentially decaying dc offsets when Discrete Fourier Transform (DFT) is used to calculate the phasor of the fundamental frequency component in a relaying signal. By subtracting the result of odd-sample-set DFT from the result of even-sample-set DFT, the information of dc offsets can be obtained. Two dc offsets in a relaying signal are treated as one dc offset which is piecewise approximated in one cycle data window. The effect of the dc offsets can be eliminated by the approximated dc offset. The performance of the proposed algorithm is evaluated by using computer-simulated signals and EMTP-generated signals. The algorithm is also tested on a hardware board with TMS320C32 microprocessor. The evaluation results indicate that the proposed algorithm has the stable and accurate eliminating performance even if the input signal contains two decaying dc components having different time constants.

태풍 강도와 발생지역의 상관성 연구: ENSO 발달과 소멸의 영향 (On the Relationship between Typhoon Intensity and Formation Region: Effect of Developing and Decaying ENSO)

  • 장새롬;하경자
    • 한국지구과학회지
    • /
    • 제29권1호
    • /
    • pp.29-44
    • /
    • 2008
  • 본 연구에서는 El $Ni{\tilde{n}}o$-Southern Oscillation(ENSO) 발달과 소멸의 영향에 따른 태풍 강도와 태풍 발생지역의 상관성을 살펴보았다. 1950년부터 2006년까지의 장기간 자료를 이용하였으며, 먼저 엘니뇨 발달해와 정상해를 정의하였다. 엘니뇨 발달해 동안에 태풍 강도와 태풍 발생지역이 높은 상관성을 나타내고 이는 누적 저기압 에너지와 태풍 에너지 강도가 증가한 결과이다. $Ni{\tilde{n}}o$ 3.4 지역의 해수면 온도를 기준으로 한 경우 엘니뇨 발달해에는, category 4+5에 해당하는 태풍의 발생지역이 동쪽으로 치우쳐 나타난다. 태풍 발생 잠재 함수와 하층의 저기압성 회전성은 태풍급에 해당하는 강도로 발달할 수 있는 강한 열대성 저기압의 발생에 중요한 요소가 된다. 본 논문에서는 역학적 잠재력[DP, Gray(1977)]과 MJO의 EOF 첫 번째 모드와 두 번째 모드의 시계열에 해당하는 RMM1, RMM2 (Wheeler and Hendon, 2004)를 이용하여 태풍 발생의 잠재함수와 대기 하층의 저기압성 회전성을 측정하였다. ENSO가 발달하는 해와 소멸하는 해와 영향을 찾아보기 위하여 엘니뇨가 소멸이 급격히 일어나 라니냐로 전환되는 Type I과 정상해로 회복하는 Type II를 정의하였다. Type I의 엘니뇨 소멸기간 동안에는 DP값과 RMM1, RMM2의 발달이 현저하게 서쪽으로 치우쳐 나타나며 강한 태풍의 발달을 지체시킴을 알 수 있었다.

Hall Effect on Couette Flow with Heat Transfer of a Dusty Conducting Fluid Between Parallel Porous Plates Under Exponential Decaying Pressure Gradient

  • Attia Hazem A.
    • Journal of Mechanical Science and Technology
    • /
    • 제20권4호
    • /
    • pp.569-579
    • /
    • 2006
  • In the present study, the unsteady Couette flow with heat transfer of a dusty viscous incompressible electrically conducting fluid under the influence of an exponential decaying pressure gradient is studied without neglecting the Hall effect. The parallel plates are assumed to be porous and subjected to a uniform suction from above and injection from below while the fluid is acted upon by an external uniform magnetic field is applied perpendicular to the plates. The governing equations are solved numerically using finite differences to yield the velocity and temperature distributions for both the fluid and dust particles.

직접수치해법을 이용한 난류 예혼합 화염전파속도 연구 (Roles of displacement speed of premixed flame embedded in isotropic turbulent decaying flow)

  • 한인석;허강열
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.177-186
    • /
    • 2006
  • Flame surface area is a critical parameter determining turbulent flame speed. Three-dimensionaldirect numerical simulations (DNS) were conducted to figure out the evolution process of flame surface area. Fully compressible Navier-Stokes equations are solved to reproduce premixed flame embedded in isotropic decaying turbulent flow. The tangential straining and curvature of propagating surface affect development of flame area. In this study, four different turbulent intensity flows and three different Le number flames are investigated to force changes in straining and curvature effects. Consistent results are obtained for the probability density functions (PDF) of strain and curvature with previous researches. It is revealed that displacement speed, which is a speed of flame surface relative to unburnt flow, controls the balance between sink and source of flame surface area.

  • PDF

Spatial moment analysis of multispecies contaminant transport in porous media

  • Natarajan, N.;Kumar, G. Suresh
    • Environmental Engineering Research
    • /
    • 제23권1호
    • /
    • pp.76-83
    • /
    • 2018
  • Spatial moment analysis has been performed on the concentration of the first species in a multispecies solute transport in porous media. Finite difference numerical technique was used in obtaining the solute concentration. A constant continuous source of contaminant was injected at the inlet of the domain. Results suggest that the decaying of solute mass increases as the magnitude of mean fluid velocity increases. The dispersion coefficient is highly time dependent under decaying of solutes with a complex behavior of mixing of solutes. The solute mobility and mixing varies non-linearly with time during its initial period, while the same ceases with higher decay rates of the first species much faster.

터보팬엔진의 터보팬과 파일론 유동장 간섭에 관한 수치적 연구 (Turbofan and Pylon Flowfields Interaction in Turbofan Engines)

  • 주원구
    • 대한기계학회논문집B
    • /
    • 제22권8호
    • /
    • pp.1164-1172
    • /
    • 1998
  • The three dimensional numerical method using actuator disk blade row model is applied for calculating the flowfield interaction between an outlet guide vane (OGV) and a pylon in a typical civil turbofan engine. The static pressure distortion produced by the pylon is decaying upstream but is still felt at the turbofan exit, and hence can significantly affect the fan performance. The OGV amplifies the static pressure perturbation decaying upstream. The calculation results show that cyclic OGV which consists of three types of blades with different exit angles can reduce more than half of the asymmetries of total pressure and static pressure propagated through the OGV with uniform exit blade angle.

직접수치해법을 이용한 난류 예혼합 화염전파속도 연구 (Roles of Displacement Speed of Premixed Flame Embedded in Isotropic Turbulent Decaying Flow)

  • 한인석;허강열
    • 한국연소학회지
    • /
    • 제12권2호
    • /
    • pp.10-19
    • /
    • 2007
  • Flame surface area is a critical parameter determining turbulent flame speed. Three-dimensional direct numerical simulations(DNS) were conducted to figure out the evolution process of flame surface area. Fully compressible Navier-Stokes equations are solved to reproduce premixed flame embedded in isotropic decaying turbulent flow. The tangential straining and curvature of propagating surface affect development of flame area. In this study, four different turbulent intensity flows and three different Le number flames are investigated to force changes in straining and curvature effects. Consistent results are obtained for the probability density functions (PDF) of strain and curvature with previous researches. It is revealed that displacement speed, which is a speed of flame surface relative to unburnt flow, controls the balance between sink and source of flame surface area.

  • PDF