• 보존과학연구
• /
• s.33
• /
• pp.99-108
• /
• 2012

The white-rot fungus (Trametes versicolor) and brown-rot fungus (Tyromyces palustris), which cause damage to a variety of wooden cultural properties and buildings, such as drying of the wood tissue, decay and cracks, sponge, and discoloration, give rise to serious structural and aesthetic problems. Moreover, pest termites (Reticulitermes speratus kyushuensis Morimoto) can cause damages like hollowing the outdoor beams or pillars of wooden buildings and finally causing such buildings to collapse due to the termites' destruction of the inside of the beams or pillars, leaving only a thin layer on their surfaces. This study was conducted to determine the impact of the wood-decay fungus, a representative damage-causing microorganism, and of insects and termites on the termite ecology. The damage ratio was calculated as the weight of the timber, and the overall total mass was reduced from two kinds of rot fungi. The white-rot fungi reduced the total wood mass, but the brown-rot fungi were observed to have had an increasing tendency to do so. The wood mass was measured after drying to determine the destruction capacity of termites. As a result, the wood mass consumed by the brown-rot fungi was shown to be greater.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.26-32
• /
• 2017

We studied the effects of dip treatments of natural extracts (Camellia sinensis, Angelica gigas, Astragalus membranaceus, Glycyrrhiza uralensis: 1% extract) on the quality of peeled 'Daebo' chestnut. After dipping treatment peeled chestnuts were vacuum packaged with $75{\mu}m$ PE+Nylon 7-layer film then stored in $4^{\circ}C$ incubator for 35days. The quality changes including the surface color and off-odor were evaluated for storage days. The natural extracts dipping treatment on peeled chestnut was effective on skin browning inhibition. Especially, Astragalus membranaceus and Glycyrrhiza uralensis extract treatments was significantly effective in reducing surface browning. The color change (${\Delta}E$) of peeled chestnut was the highest (5.6) in control, whereas that was the lowest (3.4) under Astragalus membranaceus extract treatment at 35 storage day. The natural exteacts treatments had no effect on the weight, the mositure loss rate, the firmness and the soluble solid contencts of peeled chestnuts during storage after treatment. The decaying rate of peeled chestnut was 9.0% in control, 9.0% in Camellia sinensis extract treatment, 9.0% in Angelica gigas extract treatment, 21.0% in Astragalus membranaceus extract treatment, and 7.0% Glycyrrhiza uralensis extract treatment at 35 storage day. Sensory evaluation revealed significant differences in off-odor and color attributes. After all, the score of overall sensory evaluation was the lowest in Astragalus membranaceus extract treatment and the highest in Glycyrrhiza uralensis extract treatment. As the results, the natural extract treatments, especially with vacuum packing after Glycyrrhiza uralensis extract treatment, extended the shelf-life of the peeled chestnut by inhibiting the surface browning.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.3
• /
• pp.234-253
• /
• 2021

The Quercus mongolica has a high utilization value in industrial economic sector. The species is distributed throughout Korea, however, the damage caused by deterioration such as discoloration and decay is severe. For this reason, the deterioration of Q. mongolica is an obstacle to its use as wood, but research on deterioration factors is insufficient. In this study, we focused on fungi as a factor influencing the deterioration of Q. mongolica, and isolated and identified the fungi from the deteriorated Q. mongolica. In additions, in order to confirm whether the identified fungi actually affects wood deterioration, enzyme activities of the identified fungi were evaluated and related mass loss of wood treated with the fungi was measured by wood decay test. As a result of sequencing analysis using the ITS region of the genomic DNA of the fungi isolated from Q. mongolica, Mucor circinelloides, Cunninghamella elegans, and Umbelopsis isabellina 3 species belonging to Mucoromycota phylum, and Ophiostoma piceae and Aureobasidium melanogenum 2 species belonging to Ascomycota phylum were identified. These five fungi had enzyme (i.e. cellulase, laccase) activities related to wood decay and reduced the mass of heartwood and sapwood of Q. mongolica in practice. In particular, O. piceae and A. melanogenum, which have both cellulase and laccase activities, showed 6.9% and 1.5% mass loss, respectively. These results indicated that five fungi identified in this study influence the deterioration of Q. mongolica and are wood decaying fungi for Q. mongolica potentially.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.485-491
• /
• 2022

The traditional economic order quantity (EOQ) model is analyzed under the basic assumption that the purchase price is paid immediately upon receiving the product. However, product suppliers may allow a certain period of deferral of payment for product purchase costs in order to differentiate themselves from competitors. From the distributor's point of view, such a credit transaction can temporarily divert product purchase costs, resulting in a reduction in inventory investment costs, and ultimately, a factor that lowers the selling price for the purpose of increasing end-customer demand can be. In addition, in that credit transactions are provided for the purpose of increasing the demand of suppliers as a means of differentiation from competitors, it is more general to be allowed flexibly according to the transaction volume. In this regard, assuming that the end customer's demand is represented by a linear decreasing function of the distributor's selling price, this study analyzes a model for determining the distributor's pricing and ordering policies under order-size-dependent delay in payments. For the analysis, we also assume that the inventory is depleted not only by customer's demand but also by decaying.

• Journal of the Korean Society of Tobacco Science
• /
• v.18 no.1
• /
• pp.66-75
• /
• 1996

This study was carried out to investigate the effects of high temperature and humidity on the ageing of processed leaf tobacco. Four(1993) or six(1994) grades (Both flued-cured and burley) of processed leaf packed in carton box were stored under the natural and artificial conditions. When the Processed leaf was stored in the controlled mom at 40℃ with 75% R.H.(1993) for 40 days, the leaf pH was decreased. The decreasing rate of leaf pH was similar to that of leaf stored under the natural warehouse condition for 15 months. The degree of lightness and yellowness of leaf also decreased, while the decaying or darkening of the leaf was observed. When the processed leaf was stored in the controlled room at 35℃ with 65% R.H.(1994) for 90 days, the pH of flue-cured was decreased 0.22, which was similar to that of the leaf stored under the natural warehouse condition for 15 months, and the lightness, and redness of the leaf were higher than those of the control. As compared with the leaf stored under the natural condition for 2 years, the smoking quality of leaf stored under this condition was similar or somewhat better. The pH of burley tobacco changed little compared to that of flue-cured during storage in this study.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.5
• /
• pp.334-340
• /
• 2003

Exponential window function Is widely used In impact hammer testing to reduce leakage error as well as to get a good S/N ratio. The larger its decaying rate is, the more effectively the leakage errors are reduced. But if the decay rate of the exponential window is too large, the FRF is distorted. And the modal parameters of the system can not be exactly identified by modal analysis technique. Therefore, it is a difficult problem to determine proper decay rate in impact hammer testing. In this paper, amount of the FRF distortion caused by exponential window is theoretically uncovered. A new circle fitting method is also proposed so that the modal parameters are directly extracted from impulse response spectrum distorted by the exponential-windowed impulse response data. The results by the conventional and proposed circle fitting method are compared through a numerical example.

• Journal of the Korean housing association
• /
• v.26 no.4
• /
• pp.33-44
• /
• 2015

The fast and competitive urbanization has accelerated unbalanced land utilization and housing, thereby producing large number of decaying areas and socially disadvantaged population, while generally promoted citizen's quality of life. Since rental housing policy, therefore, has emerged as a major important issue to solve these ever increasing problems, new concepts in leading examples need to be explored to stimulate creative ideas for future housing improvement. The purpose of this research is to extract successful factors of a leading rental housing 'Manhattan Plaza' in New York city, expecting useful implications for housing improvement in Korea. Field visit and in-depth interview for data collection and qualitative approach for analysis were carried out. As results, its successful sustainability and fame were found to be attributable to following concepts, such as, socially integrative mix of diverse residents, residents' participation in management, privacy respect administration, considerate planning and design features of physical environment. The latter, especially, were prominent in peripheral spaces, indoor and outdoor community spaces, and private spaces. Based on the results, suggestions were made for future Korean rental housing development.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.98-107
• /
• 2017

Electric components equipped with naval shipboards must endure mechanical shock caused by various mechanical impulsive sources. Thus the components must be designed carefully and reliability test is an essential procedure before use. In this study, a new design technology applicable to a large and heavy shock generation system which can generate various specific real mechanical shocks in specified time domain was introduced. Commonly, the shock transmitted through the wall of naval shipboard consists of dual shocks. The primary shock is of a very high amplitude and very short period half-sine form. The following shock is of an exponentially decaying harmonic form of relatively longer period. Based on the different dynamic characteristics of two shocks, we proposed a sequential design procedure to determine spring and damping coefficients of the generation system. Some numerical simulation results showed the feasibility of the proposed method.

• Mycobiology
• /
• v.45 no.1
• /
• pp.9-14
• /
• 2017

Most known species in the Physalacriaceae are saprotrophs that grow on decaying leaves and wood, and approximately 21 genera in the Physalacriaceae have been reported worldwide. During an ongoing survey of indigenous fungi in Korea, four specimens belonging to the Physalacriaceae were collected on Ulleung Island. These specimens were identified as three species based on morphological characteristics and molecular analysis of rDNA-internal transcribed spacer sequences. Three species in three genera were shown to be new records in Korea: Hymenopellis orientalis, Paraxerula hongoi, and Ponticulomyces orientalis. The latter two are the first records of these genera in Korea. In this study, we provide detailed morphological descriptions of these species and describe their phylogenetic position within the Physalacriaceae.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.6
• /
• pp.688-696
• /
• 2004

Nonlinear dynamic behavior of diffusive-thermal instability in diluted CH$_4$/O$_2$ diffusion flames is numerically investigated by adopting detailed chemistry and transport. Counterflow diffusion flame is adopted as a model flamelet. Particular attention is focused on the pulsating-instability regime, which arises for Lewis numbers greater than unity, and the instability occurs at high strain rate near extinction condition in this flame configuration. Once a steady flame structure is obtained for a prescribed value of initial strain rate, transient solution of the flame is calculated after a finite amount of strain-rate perturbation is imposed on the steady flame. Transient evolution of the flame depends on the initial strain rate and the amount of perturbed strain rate. Basically, the dynamic behaviors can be classified into two types, namely non-oscillatory decaying solution and diverging solution leading to extinction. The peculiar oscillatory solution, which has been found in the previous study adopting one-step chemistry and constant Lewis numbers, is net observed in this study, which is attributed to both convective flow and preferential diffusion effects.