• 한국표면공학회지
• /
• 제31권1호
• /
• pp.34-44
• /
• 1998

Stainless steel is being used widely lor various purposes due to its good corrosion resistance. There has becn much research to produce colored stainless sterl by several methods. In this experiment, we coated TixN film on the SUS304 substrate with thc DC magnetron sputtering system and studied the internal structurc and adhesive strength of the films as a function of the coating conditions. Before lhe specimen was coated, a sputter etching was very effective in removing the$\delta$ Fe(BCC) phase as well as the contaminant and oxide layer as well as increasing rotghness. Five-stage failure mode appeared with increased scratch load with the TIN films coated on the SUS304 in this manner ; tensile failure-,conformal failure-,buckling failure->chipping failurc and spalling Failure. When the failure was terminated at the initial stage, the film will have good adhesion. But, if syalling failure has occurred at the initial scratch, then the adhesion will be poor. The interlayer between thc coated film and thc substratc was homogeneously adhcsive when the $\gamma'-Fe_4N$ phase wasn't detected in the XRD analysis and the adhesive strength only was reduced by surPace defects. But, when the ,$\gamma'-Fe_4N$N phasc was detected in the XRD analysis, the adhesive strength was very poor.

• 한국표면공학회지
• /
• 제41권4호
• /
• pp.142-146
• /
• 2008

Trivalent ions(Ga, Al, In) doped ZnO films were deposited by DC magnetron sputtering on non-alkali glass substrate at substrate temperature of $300^{\circ}C$. We used the different three types of high density($95%{\sim}$) ceramic sintered disks(doped with $Ga_2O_3$; 6.65 wt%, $Al_2O_3$; 3.0 wt%, $In_2O_3$; 9.54 wt%). This study examined the effect of different dopants(Ga, Al, In) on the electrical, structural, and optical properties of the films. The lowest resistivity of $5.14{\times}10^{-4}{\Omega}cm$ and the highest optical band gap of 3.74 eV were obtained by Ga doped ZnO(GZO) film. All the films had a preferred orientation along the(002) direction, indicating that the growth orientation has a c-axis perpendicular to the substrate surface. The average transmittance of the films was more than 85% in the visible range.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.92-92
• /
• 2011

IZTO and ITO thin films with a thickness of 200nm were deposited on Corning glass substrate to investigate the effects of substrate temperature on their electrical and optical properties by using pulsed DC magnetron sputtering with a sintered ceramic target of IZTO (In2O3 70 wt.%, ZnO 15 wt.%, SnO2 15 wt.%) and ITO (In2O3 90 wt.%, SnO2 10 wt.%). We investigated the structural, electrical, and optical properties of IZTO and ITO films. The structural and electrical properties of both films are sensitive on the substrate temperature. As the substrate temperature is increased, the electrical resistivity of ITO films is improved, but that of IZTO film increase over than $100^{\circ}C$. All IZTO and ITO thin films have good optical properties, which showed an average of transmittance over 80%. As a result, IZTO films can be a possible material for flexible display due to the low processing temperature.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.93-93
• /
• 2011

The Indium Zinc Tin Oxide (IZTO) and Indium Tin Oxide (ITO) thin films are grown on PI substrate at different substrate temperature by pulsed DC magnetron sputtering with a sintered ceramic target of IZTO (In2O3 70 wt.%, ZnO 15 wt.%, SnO2 15 wt.%) and ITO (In2O3 90wt.%, SnO2 10wt.%). The structural, electrical, and optical properties are investigated. The IZTO thin films deposited at low temperature showed relatively low electrical resistivity compared to ITO thin films deposited at low temperature. As a result, we could prepare the IZTO thin films with the resistivity as low as $5.6{\times}10^{-4}({\Omega}{\cdot}m)$. Both of the films deposited on PI substrate showed an average transmittance over 80% in visible range (400.800nm). Overall, IZTO thin film is a promising candidate as an alternative TCO material to ITO in flexible and OLED devices.

• 한국세라믹학회지
• /
• 제32권7호
• /
• pp.799-808
• /
• 1995

Transparent conductive films of aluminium doped zinc oxide (AZO) have been prepared by using the DC magnetron sputtering with the ZnO : Al (Al2O3 2 wt%) oxide target oriented to c-axis. Electrical and optical properties depended upon the O2/Ar gas ratio. The optical transmittance and sheet resistance of the AZO coated glass was 60~65% and 75Ω/$\square$, respectively at the O2/Ar gas ratio of 0. With the increase of the oxygen partial pressure to 2.0$\times$10-2, they were increased to the values of 81% and 1kΩ/$\square$, respectively. The films with the resistivities of 1.2~1.4$\times$10-3 Ω.cm, mobilities of 11~13 $\textrm{cm}^2$/V.sec and carrier concentrations of 3.5$\times$1020~4.0$\times$1020/㎤ were produced at the optimum O2/Ar gas ratio, which was 0.5$\times$10-2~1.0$\times$10-2. According to XRD analysis, the films have only one peak corresponding to the (002) plane, which indicates that there is a strong preferred orientation of the films. The grain size of ZnO films were calculated to 200~320 $\AA$, which was increased with the O2/Ar gas ratio and Ar gas flowrate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.419-420
• /
• 2008

In this study, high quality (Al,N)-codoped p-type ZnO thin films were obtained by DC magnetron sputtering. The film on buffer layer grown in 80% $N_2$ ambient shows highest hole concentration of $2.93\times10^{17}cm^{-3}$. The films show hole concentration in the range of $1.5\times10^{15}$ to $2.93\times10^{17}cm^{-3}$, resistivity of 131.2 to 2.864 $\Omega$cm, mobility of 3.99 to 31.6 $cm^2V^{-1}s^{-1}$. The films on Si show easier p-doping in ZnO than those on buffer layer. The film on Si shows the highest quality of optical photoluminescence (PL) characteristics. The donor energy level $(E_d)$ of (Al,N)-codoped ZnO films is about 50 meV and acceptor energy level $(E_a)$ is in the range of 63 to 71 meV. It will help to improve p-type ZnO films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.468-468
• /
• 2008

IZO(Indium zinc oxide) 박막은 화학적으로 안정하면서, 가시광 영역 (380~780 nm)에서 80% 이상의 높은 투과도와 낮은 전기비저항, 3.5 eV 이상의 넓은 밴드갭 특성을 가진다. IZO 박막의 이러한 특성 때문에 평판표시소자 (Flat Panel Display; FPD) 및 태양전지와 같은 광전소자들의 차세대 투명전도성 산화물(Transparent Conducting Oxide; TCO) 박막 재료로 주목 받고 있다. 특히 평판표시소자(FPD)들의 고해상도, 대면적화 및 경량화로 인해 투명전극용 박막의 고품위 특성이 요구되고 있다. 현재 투명 전극으로 널리 사용되고 있는 고가의 ITO(indium tin oxide)를 대체할 다성분계 산화물 투명 전극 중에서 투광성과 전기전도도가 좋은 IZO 박막에 대한 많은 연구가 진행되고 있다. 이러한 IZO 박막의 광학적, 전기적 특성은 박막 내의 조성 차이와 미세구조에 의해 결정된다. 따라서 고품위의 IZO 박막 형성을 위해서 결정구조와 미세구조에 대한 분석이 필수적이다. 본 연구에서는 Si(100) 기판 위에 DC-sputtering으로 증착한 IZO 박막의 열처리 온도에 따른 구조적 특성을 알아보기 위해 300~$600^{\circ}C$ 공기분위기에서 1시간 동안 열처리 하였다. 표면 형상(surface morphology)은 원자현미경(AFM). 결정구조는 X-선 회절(XRD)로 분석하였고, 미세구조는 투과전자현미경(TEM)으로 관찰하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제10권3호
• /
• pp.89-92
• /
• 2009

High-quality Al-N doped p-type ZnO thin films were deposited on Si and buffer layer/Si by DC magnetron sputtering in a mixture of $N_2$ and $O_2$ gas. The target was ceramic ZnO mixed with $Al_2O_3$ (2 wt%). The p-type ZnO thin films showed a carrier concentration in the range of $1.5{\times}10^{15}{\sim}2.93{\times}10^{17}\;cm^{-3}$, resistivity in the range of 131.2${\sim}$2.864 ${\Omega}cm$, mobility in the range of 3.99${\sim}$31.6 $cm^2V^{-1}s^{-l}$, respectively. It was easier to dope p-type ZnO films on Si substrates than on buffer layer/Si. The film grown on Si showed the highest quality of photoluminescence (PL) characteristics. The Al donor energy level depth $(E_d)$ of Al-N codoped ZnO films was reduced to about 50 meV, and the N acceptor energy level depth $(E_a)$ was reduced to 63 meV.

• 한국표면공학회지
• /
• 제50권2호
• /
• pp.119-124
• /
• 2017

Due to the high saturation magnetization (~2.4 T), $Fe_{16}N_2$ is interesting for the thin film application such as an actuator, data record storage and sensor etc. In this study, Fe-N thin films were deposited on Si(001) substrate with various power and deposition time by DC magnetron sputtering, in order to get high portion of $Fe_{16}N_2$ phase. Surface morphology, phase formation and magnetic properties were measured. As a result, Saturation magnetization and Remanence magnetization reach to ~2.45 T and 1.41T. But, Coercivity was not enough in this experiments. Its value lower than 100 Oe. Which is very close to theoretical value.

• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.738-746
• /
• 2004

Recently zinc oxide(ZnO) has emerged as one of the most promising transparent conducting films with a strong demand of low cost and high performance optoelectronic devices, ZnO film has many advantages such as high chemical and mechanical stabilities, and abundance in nature. In this paper, in order to obtain the excellent transparent conducting film with low resistivity and high optical transmittance for Plasma Display Pannel(PDP), aluminium doped zinc oxide films were deposited on Corning glass substrate by dc magnetron sputtering method. The effects of the discharge power and doping amounts of $Al_2$$O_3$ on the electrical and optical properties were investigated experimentally. Particularly in order to lower the electrical resistivity, positive and negative bias voltages were applied on the substrate, and the effect of bias voltage on the electrical properties of ZnO:Al thin film were also studied and discussed. Films with lowest resistivity of $4.3 \times 10 ^{-4} \Omega-cm$ and good transmittance of 91.46 % have been achieved for the films deposited at 1 mtorr, $400^{\circ}C$, 40 W, Al content of 2 wt% with a substrate bias of +30 V for about 800 nm in film thickness.