• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1310-1319
• /
• 2024

The reactor cavity cooling system (RCCS) is a passive reactor safety system commonly present in the designs of High-Temperature Gas-cooled Reactors (HTGR) that removes heat from the reactor pressure vessel by means of natural convection and radiation. It is one of the factors responsible for ensuring that the reactor does not melt down under any plausible accident scenario. For the simulation of accident scenarios, which are transient phenomena unfolding over a span of up to several days, intermediate fidelity methods and system codes must be employed to limit the models' execution time. These models can quantify radiation heat transfer well, but heat transfer caused by natural convection must be quantified with the use of correlations for the heat transfer coefficient. It is difficult to obtain reliable correlations for HTGR RCCS heat transfer coefficients experimentally due to such a system's size. They could, however, be obtained from high-fidelity steady-state simulations of RCCSs. The Rayleigh number in RCCSs is too high for using a Direct Numerical Simulation (DNS) technique; thus, a Reynolds-Averaged Navier-Stokes (RANS) approach must be employed. There are many RANS models, each performing best under different geometry and fluid flow conditions. To find the most suitable one for simulating an RCCS, the RANS models need to be validated. This work benchmarks various RANS models against three experiments performed on the HTTR RCCS Mockup by the Japanese Atomic Energy Agency (JAEA) in 1993. This facility is a 1/6 scale model of a vessel cooling system (VCS) for the High Temperature Engineering Test Reactor (HTTR), which is operated by JAEA. Multiple RANS models were evaluated on a simplified 2d-axisymmetric geometry. They were found to reproduce the experimental temperature profiles with errors of up to 22% for the lowest temperature benchmark and 15% for the higher temperature benchmarks. The results highlight that the pragmatic turbulence models need to be validated for high Rayleigh natural convection-driven flows and improved accordingly, more publicly available experimental data of RCCS resembling experiments is needed and indicate that a 2d-axisymmetric geometry approximation is likely insufficient to capture all the relevant phenomena in RCCS simulations.

• Journal of the Korean Geosynthetics Society
• /
• v.23 no.1
• /
• pp.17-25
• /
• 2024

The Voids in the Mineral Aggregate (VMA) within asphalt mixtures play a crucial role in defining the mixture's structural integrity, durability, and resistance to environmental factors. Accurate prediction and optimization of VMA are essential for enhancing the performance and longevity of asphalt pavements, particularly in varying climatic and environmental conditions. This study introduces a novel machine learning framework leveraging ensemble machine learning model for predicting VMA in asphalt mixtures. By analyzing a comprehensive set of variables, including aggregate size distribution, binder content, and compaction levels, our framework offers a more precise prediction of VMA than traditional single-model approaches. The use of advanced machine learning techniques not only surpasses the accuracy of conventional empirical methods but also significantly reduces the reliance on extensive laboratory testing. Our findings highlight the effectiveness of a data-driven approach in the field of asphalt mixture design, showcasing a path toward more efficient and sustainable pavement engineering practices. This research contributes to the advancement of predictive modeling in construction materials, offering valuable insights for the design and optimization of asphalt mixtures with optimal void characteristics.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.4
• /
• pp.579-586
• /
• 2018

Short-term prediction of travel speed has been widely studied using data-driven non-parametric techniques. There is, however, a lack of research on the prediction aimed at urban areas due to their complex dynamics stemming from traffic signals and intersections. The purpose of this study is to develop a hybrid approach combining ensemble empirical mode decomposition (EEMD) and artificial neural network (ANN) for predicting urban travel speed. The EEMD decomposes the time-series data of travel speed into intrinsic mode functions (IMFs) and residue. The decomposed IMFs represent local characteristics of time-scale components and they are predicted using an ANN, respectively. The IMFs can be predicted more accurately than their original travel speed since they mitigate the complexity of the original data such as non-linearity, non-stationarity, and oscillation. The predicted IMFs are summed up to represent the predicted travel speed. To evaluate the proposed method, the travel speed data from the dedicated short range communication (DSRC) in Daegu City are used. Performance evaluations are conducted targeting on the links that are particularly hard to predict. The results show the developed model has the mean absolute error rate of 10.41% in the normal condition and 25.35% in the break down for the 15-min-ahead prediction, respectively, and it outperforms the simple ANN model. The developed model contributes to the provision of the reliable traffic information in urban transportation management systems.

• Geophysics and Geophysical Exploration
• /
• v.26 no.3
• /
• pp.114-125
• /
• 2023

The physics-informed neural network (PINN) has been proposed to overcome the limitations of various numerical methods used to solve partial differential equations (PDEs) and the drawbacks of purely data-driven machine learning. The PINN directly applies PDEs to the construction of the loss function, introducing physical constraints to machine learning training. This technique can also be applied to wave equation modeling. However, to solve the wave equation using the PINN, second-order differentiations with respect to input data must be performed during neural network training, and the resulting wavefields contain complex dynamical phenomena, requiring careful strategies. This tutorial elucidates the fundamental concepts of the PINN and discusses considerations for wave equation modeling using the PINN approach. These considerations include spatial coordinate normalization, the selection of activation functions, and strategies for incorporating physics loss. Our experimental results demonstrated that normalizing the spatial coordinates of the training data leads to a more accurate reflection of initial conditions in neural network training for wave equation modeling. Furthermore, the characteristics of various functions were compared to select an appropriate activation function for wavefield prediction using neural networks. These comparisons focused on their differentiation with respect to input data and their convergence properties. Finally, the results of two scenarios for incorporating physics loss into the loss function during neural network training were compared. Through numerical experiments, a curriculum-based learning strategy, applying physics loss after the initial training steps, was more effective than utilizing physics loss from the early training steps. In addition, the effectiveness of the PINN technique was confirmed by comparing these results with those of training without any use of physics loss.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.49-56
• /
• 1998

Seismic tomography has been widely used as high resolution subsurface imaging techniques in engineering applications. Although most of the techniques have been using travel time inversion, waveform method is being driven forward owing to the progress of computational environments. Although full-waveform inversion method has been known as the best method in terms of model resolving power without high-frequency restriction and weak scattering approximation, it has practical disadvantage that it is apt to get stuck in local minimum if the initial guess is far from the actual model and it consumes so much time to calculate. In this study, 2-D full-waveform inversion algorithm in acoustic medium is developed, which uses result of traveltime tomography as initial model. From the application on synthetic data, it is proved that this approach can efficiently reduce the problem of conventional approaches: our algorithm shows much faster convergence rate and improvement of model resolution. Result of application on physical modeling data also shows much improvement. It is expected that this algorithm can be applicable to real data.

• Korean Journal of Adult Nursing
• /
• v.12 no.1
• /
• pp.52-63
• /
• 2000

In Korea, most of the patients with chronic liver diseases have been using some kind of alternative therapies at home. however, the question is why do people turn to alternative therapy and how the patients are able to use the alternative therapies widely, though the effects have not been proven scientifically. Therefore, it is necessary to explore the process of the patients' experiences using the alternative therapies. The 16 participants were from internalmedical departments in hospital and the permission was received to participate in this study from the subjects. The data were collected with interviews and participants observations, analyzed by the grounded theory methodology of Strauss and Corbin(1990). With the analysis of the data, 15 categories were generated such as psychological pressures, barriers of role performances, distrusts of western medicine, blind obediences to the treatments, attitudes towards alternative therapies, supportive systems, obstacles to taking alternative therapies, financial burdens, collecting informations, pursuing alternative modalities, efforting diversities, analyzing by themselves, managing the body, accepting the disease, and ambivalence. The paradigm model was developed to identify the relationships of categories. The central phenomenon of the experiences of seeking alternative therapies was named jagi momdasrim. The central concept of jagi momdasrim is a mind-set to desire to wellness and to take more responsibility for one's own healing by pursuing alternate healing modalities rather than the western medical system. The process of jagi momdasrim evolved several stages such as seeking, finding, struggling, overcoming, fulfilling, and governing the diseases. Four patterns of taking alternative therapies were found as follows: the bulsin-chujong-hyung, the suyoung-hyung, the yangdari-gulchiki-hyung, the chamjae-hyung. In conclusion, the phenomenon of alternative therapies as consumer-driven force to heal the chronic liver diseases of the patients could be explained as an adaptive behavior through the process of jagi momdasrim. However, since most of the participants practicing some kind of alternative therapies had no evidences of its effects and never tried to consult with their medical doctors about alternative therapies, we should approach more actively. Therefore, it is recommended for nurses to listen and watch the patients behaviors of using alternative therapies and find out how to educate the patients about the proper and safe way to take the alternative therapies.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.2
• /
• pp.127-135
• /
• 2020

The purpose of this paper is to classify individual startups by growth stage based on data-based quantitative criteria. This is to provide a basis for systematic support for government startups based on accurate statistics on the startup growth process. This startups were the TIPS (Tech Incubator Program for Startup) support company, which used a relatively reliable startup. We found seed money to complete MVP (Minimum Viable Product) within 1.5 years after establishment, verified PMF (Product-Market Fit) within 1 year, attracted Series A investment within 2.5 years after establishment, and successfully commercialized it. It attracted Series B investment for stable growth within 1.5 years (Series B investment within 4 years from start-up). The results of the study, the division of government programs that support stage-based startup commercialization, that is, within three years and within seven years of establishment, is significant to date. Three directions are suggested for future research. First, develop indicators for monitoring startup growth stages. Second, it continuously updates the annual changes and tracks the growth stages of individual startups. Third, we discover the successful growth law of technology-based startups by applying in-depth case analysis of successful startups to the model.

• Journal of Korea Water Resources Association
• /
• v.53 no.8
• /
• pp.569-582
• /
• 2020

Recently, Korea has faced a change in the pattern of water use due to urbanization, which has caused difficulties in understanding the rainfall-runoff process and optimizing the allocation of available water resources. In this perspective, spatially downscaled analysis of the water balance is required for the efficient operation of water resources in the National Water Management Plan and the River Basin Water Resource Management Plan. However, the existing water balance analysis does not fully consider water circulation and availability in the basin, thus, the obtained results provide limited information in terms of decision making. This study aims at developing a novel water circulation analysis model that is designed to support a quasi-real-time assessment of water availability along the river. The water circulation model proposed in this study improved the problems that appear in the existing water balance analysis. More importantly, the results showed a significant improvement over the existing model, especially in the low flow simulation. The proposed modeling framework is expected to provide primary information for more realistic hydrological drought monitoring and drought countermeasures by providing streamflow information in quasi-real-time through a more accurate natural flow estimation approach with highly complex network.

• Asia pacific journal of information systems
• /
• v.17 no.3
• /
• pp.131-146
• /
• 2007

Recently, the role of IT service providers has been enlarged from managing a single function or system to reconstructing entire information management processes in new ways to contribute to shareholder value across the enterprise. This movement toward extensive and complex outsourcing agreements has been driven by the assumption that outsourcing information technology functions is a reliable approach to maximizing resource productivity. Hiring external IT service providers to manage part or all of its information-related services helps a firm focus on its core business and provides better services to its clients, thus obtaining sustainable competitive advantage. This practice of focusing on the strategic aspect of outsourcing is referred to as strategic sourcing where the focus is capability sourcing, not procurement. Given the importance of the strategic outsourcing, however, to our knowledge, there is little empirical research on the relationship between the strategic outsourcing orientation and outsourcing performance. Moreover, there is little research on the factor that makes the strategic outsourcing effective. This study is designed to investigate the relationship between strategic IT outsourcing orientation and IT outsourcing performance and the process through which strategic IT outsourcing orientation influences outsourcing performance, Based on the framework of strategic orientation-performance and core competence based management, this study first identifies core competency orientation as a proper strategic orientation pertinent to IT outsourcing and IT outsourcing process management capability as the mediator to affect IT outsourcing performance. The proposed research model is then tested with a sample of 200 firms. The findings of this study may contribute to the literature in two ways. First, it draws on the strategic orientation - performance framework in developing its research model so that it can provide a new perspective to the well studied phenomena. This perspective allows practitioners and researchers to look at outsourcing from an angle that emphasizes the strategic decision making to outsource its IT functions. Second, by separating the concept of strategic orientation and outsourcing process management capability, this study provides practices with insight into how the strategic orientation can work effectively to achieve an expected result. In addition, the current study provides a basis for future studies that examine the factors affecting IT outsourcing performance with more controllable factors such as IT outsourcing process management capability rather than external hard-to-control factors including trust and relationship management. This study investigates the major factors that determine IT outsourcing success. Based on strategic orientation and core competency theories, we develop the proposed research model to investigate the relationship between core competency orientation and IT outsourcing performance and the mediating role of IT outsourcing process management capability on IT outsourcing performance. The model consists of two independent variables (core-competency-orientation and IT outsourcing process management capability), and two dependent variables (outsourced task complexity and IT outsourcing performance). Comprehensive data collection was conducted through an outsourcing association. The survey data were analyzed using a structural analysis method. IT outsourcing process management capability was found to mediate the effect of core competency orientation on both outsourced task complexity and IT outsourcing performance. Further analysis and findings are discussed.

• Journal of Korea Water Resources Association
• /
• v.54 no.11
• /
• pp.969-983
• /
• 2021

Evapotranspiration, one of the hydrometeorological components, is considered an important variable for water resource planning and management and is primarily used as input data for hydrological models such as water balance models. The FAO56 PM method has been recommended as a standard approach to estimate the reference evapotranspiration with relatively high accuracy. However, the FAO56 PM method is often challenging to apply because it requires considerable hydrometeorological variables. In this perspective, the Hargreaves equation has been widely adopted to estimate the reference evapotranspiration. In this study, a set of parameters of the Hargreaves equation was calibrated with relatively long-term data within a Bayesian framework. Statistical index (CC, RMSE, IoA) is used to validate the model. RMSE for monthly results reduced from 7.94 ~ 24.91 mm/month to 7.94 ~ 24.91 mm/month for the validation period. The results confirmed that the accuracy was significantly improved compared to the existing Hargreaves equation. Further, the evaporative demand drought index (EDDI) based on the evaporative demand (E₀) was proposed. To confirm the effectiveness of the EDDI, this study evaluated the estimated EDDI for the recent drought events from 2014 to 2015 and 2018, along with precipitation and SPI. As a result of the evaluation of the Han-river watershed in 2018, the weekly EDDI increased to more than 2 and it was confirmed that EDDI more effectively detects the onset of drought caused by heatwaves. EDDI can be used as a drought index, particularly for heatwave-driven flash drought monitoring and along with SPI.