• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.63-71
• /
• 2004

This research is to reconstruction of railway alignment using GPS data, an investigation is made on the method of optimum simplification for reduction of unnecessary linear data, improve the accuracy by using four simplification algorithms among the methods. By applying two measured of displacement between observed data and it's simplification methods have been evaluated. The results showed that the complexities of lines is not practical to investigate simplification algorithms, the Douglas-Peucker method produced a little displacement between observed data and it's simplification. Its by using the Douglas-Peucker method to observed linear GPS data in railway track, design elements of horizontal alignment have been calculated. Then we could know that obtain the good results fur reconstruction of alignment elements through the methods and algorithns of this study.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1312-1314
• /
• 2004

This paper proposes a new simplification algorithm that simplifies reconstructed polygonal mesh from 3D point set considering an original point set. Previous method computes error using mesh information, but it makes to increase error of difference between an original and a simplified model by reason of implementation of simplification. Proposed method simplifies a reconstructed model using an original point data, we acquire a simplified model similar an original. We show several simplified results to demonstrate the usability of our methods.

• Phonetics and Speech Sciences
• /
• v.1 no.1
• /
• pp.33-40
• /
• 2009

This study examines how young speakers of Seoul Korean produce tri-consonantal clusters /1kt/ and /1pt/ as in palk-ta ('to be bright') and palp-ta ('to step on'). Production data were collected from 20 speakers of Seoul Korean. The results of narrow transcription of the data showed that simplification is not obligatory as some speakers often preserve all three consonants. When simplified, there was a clear asymmetry between /1kt/ and /1pt/. Speakers showed no clear preference for either C1 preservation (C1=/1/) or C2 preservation (C2=/k/ in /1kt/ and /p/ in /1pt/) in production of /1kt/, but in production of /1pt/, strong preference was found for C1-preserved to C2-preserved variant. When compared with production data in Cho (1999), simplification patterns appear to have changed over the past 10 years, in a direction to preserve the first member of the cluster (/1/) more often, especially with /1kt/. There was no substantial between-item variation, indicating that simplification patterns are not lexically specified. Finally, the results suggest that the process of tri-consonantal simplification has not been fully phonologized in the grammar of the language as evident in substantial inter- and intra-speaker variation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.9_10 s.146
• /
• pp.1359-1368
• /
• 2005

When we develop the tight-fit 2D pattern from the 3D scan data, segmentation of the 3D scan data into several parts is necessary to make a curved surface into a flat plane. In this study, Garland's method of triangle simplification was adopted to reduce the number of data point without distorting the original shape. The Runge-Kutta method was applied to make triangular patch from the 3D surface in a 2D plane. We also explored the detailed arrangement method of small 2D patches to make a tight-fit pattern for a male body. As results, minimum triangle numbers in the simplification process and efficient arrangement methods of many pieces were suggested for the optimal 2D pattern development. Among four arrangement methods, a block method is faster and easier when dealing with the triangle patches of male's upper body. Anchoring neighboring vertices of blocks to make 2D pattern was observed to be a reasonable arrangement method to get even distribution of stress in a 2D plane.

• Journal of Multimedia Information System
• /
• v.4 no.4
• /
• pp.249-254
• /
• 2017

Digital vector maps must be compressed effectively for transmission or storage in Web GIS (geographic information system) and mobile GIS applications. This paper presents a polyline compression method that consists of polyline feature-based hybrid simplification and second derivative-based data compression. Experimental results verify that our method has higher simplification and compression efficiency than conventional methods and produces good quality compressed maps.

• Journal of Korea Multimedia Society
• /
• v.16 no.4
• /
• pp.418-429
• /
• 2013

This paper presents a GIS vector map data compression scheme based on hybrid polyline simplification method and SEC(spatial energy compaction). The proposed method extracts all layers which contain polylines in the GIS vector map and compress all polylines in extracted layers by the hybrid polyline simplification and SEC based on MAE(minimum area error) for each segment in the line. The proposed simplification and SEC increase the compression ratio while preserving the shape quality. We analyze the visual aspects and compression efficiency between the original GIS vector map and the compressed map. From experimental results, we verify that our method has the higher compression efficiency and visual quality than conventional methods.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.2
• /
• pp.132-139
• /
• 2012

Presented in the paper is a procedure to extract simplified triangular mesh from a height map (terrain data). The proposed algorithm works directly on a height map that extracts a simplified triangular mesh. For the simplification, the paper employs an iterative method of edge contractions. To determine an edge to be contracted, the contraction cost of an edge is evaluated through the QEM method. Normally, an edge contraction will remove two triangles sharing the edge. Although the edge contraction can be implemented easily on a triangular mesh, it is not viable to implement the operation on a height map due to the irregular topology. To handle the irregular topology during the simplification procedure, a new algorithm is introduced.

• Journal of Korean Society of Rural Planning
• /
• v.11 no.1 s.26
• /
• pp.9-15
• /
• 2005

Preservation of geometrical context of terrains in a digitized format is useful in handling and making modification to the data. Digitization of three-dimensional terrain still proves a great challenge due to heavy load of context required to retain details of topological and geometrical information. Methods of simplification, restoration and multi-level terrain generation are often employed to transform the original data into a compressed digital format. However, reduction of the stored data size comes at an expense of loss of details in the original data set. This article reports on an alternative scheme for simplification and restoration of terrain data. The algorithm utilizes the fact that the terrain formation and patterns can be predicted and modeled through the fractal algorithm. This method was used to generate multi-level terrain model based on NGIS digital maps with preserving geometrical context of terrains.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.355-356
• /
• 2011

LiDAR data is very large, which contains an amount of redundant information. The information not only takes up a lot of storage space but also brings much inconvenience to the LIDAR data transmission and application. Therefore, a simplified method was proposed for LiDAR data based on quad-tree structure in this paper. The boundary contour lines of the buildings are displayed as building extraction. Experimental results show that the method is efficient for point's simplification according to the rule of mapping.

• Journal of Korea Multimedia Society
• /
• v.18 no.3
• /
• pp.298-311
• /
• 2015

Vector data represents a map by its coordinate and Raster data represents a map by its pixel. Since these data types have very large data size, data compression procedure is a compulsory process. This paper compare the results from three different methodologies; GIS (Geographic Information System) vector map data compression using DP(Douglas-Peucker) Simplification algorithm, vector data compression based on Bin classification and the combination between two previous methods. The results shows that the combination between the two methods have the best performance among the three tested methods. The proposed method can achieve 4-9% compression ratio while the other methods show a lower performance.