• Journal of the Korean Society of Radiology
• /
• v.8 no.3
• /
• pp.97-103
• /
• 2014

Decommission of medical cyclotron give rise to a lot of low-level radioactive waste and costs. Decommissioning cost should be reasonably calculated according to the decommissioning activities and installed components of facilities. In this paper, we investigated the experience on the cyclotron relocation from SNUH(Seoul National University Hospital) to SKKU(Sungkyunkwan University) and analyzed radioactive waste management costs by applying the disposal scenarios. Also considerations for decommissioning cost estimation are reviewed. The results could be utilized as a basic data for establishment on the methodology of decommissioning cost estimation and evaluation.

• Journal of Information Technology Applications and Management
• /
• v.18 no.4
• /
• pp.81-93
• /
• 2011

By using GOSST theory, this paper models SSCFLP taking FLP, capacity of the facilities, single source capacitated limitation level and service enhancement issues into consideration. GOSST theory is strongly suggested as the solution procedure for these issues. We have used clustering of Center of Gravity method using the case study of the company S and then, took a heuristic GOSST measure in the alternative selection process. As a result, the research finds an alternative solution that both meets the satisfactory level of service and achieves consistent distribution capacity. When using this modeling, especially, to select the location of the logistics distribution center, the efficiency of current facilities is maximized while offering the minimum geometric distance for the alternative. Also, we can expect that the illustrated model and alternative solution can be applied to architecture of distribution system, to selection of telecommunication system locations for wireless network and to relocation of related facilities due to their sensitivities to location and weight.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.5
• /
• pp.583-591
• /
• 2004

In this study, methodologies for the rational organization of air pollution monitoring network were examined by understanding the characteristics of temporal and spatial distribution of secondary air pollution, whose significance would increase hereafter. The data on $O_3$ and $NO_2$ concentrations during high ozone period in 1998~1999 recorded at the nine air pollution monitoring station in Busan were analysed using principal component analysis (PCA) and cumulative semivariogram. It was found that the ozone concentration was deeply associated with the daily emission characteristics or the $O_3$ precusors, and nitrogen dioxide concentration largely depends on the emission strength of regional sources. According to the spatial distribution analysis of ozone and nitrogen dioxide in Busan using cumulative semivariograms, the number of monitoring stations for the secondary air pollution can be reduced in east-west direction, but reinforced in north-south direction to explain the spacial variability. More scientific and rational relocation of air pollution monitoring network in Busan would be needed to investigate pollution status accurately and to plan and implement the pollution reduction policies effectively.

• Journal of Environmental Science International
• /
• v.26 no.4
• /
• pp.543-547
• /
• 2017

Normalized Difference Vegetation Index (NDVI) has played an important role in assessing green plant biomass through remote sensing on global scale since the early 1970s. The concept of NDVI is based on the fact that green plants show higher reflection in near-infrared region than in visible region of the electromagnetic spectrum. However, it is well known that the relocation of chloroplasts in plant leaf cells may dramatically change the optical properties of plant leaves. In this study I traced the changes in the reflectance and transmittance properties of Tobacco leaves at the wavelengths of 660 and 800 nm after a sudden increase in light intensity. The results showed that NDVI of leaves gradually decreased from 72.7% to 69.9% when exposed to a sudden increase in light intensity from 30 to $1,200{\mu}mol/m^2{\cdot}s$. This means that the error resulting from the physiological status of the plant should be accounted for a more precise understanding of ground truth corresponding to the data from the remotely acquired images.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.2
• /
• pp.39-47
• /
• 2020

Purpose: Clinical laboratory of hospital has been demanded to extension or relocation regarding with the test number increase and analyzer development. Space area criteria per test numbers, lab functions, hospital bed and lab staffs are needed for draft space programing. So, the purpose of this study is to provide the space area guideline of clinical laboratory for space calculation in planning and design the spatial environment. Methods: Literature review has been used in checking the standards and guidelines. And questionnaire surveys to laboratory supervisors in hospitals have been conducted for the data collection. 60 answers have been analysed statistically by MS Excel program. Results: The result of this study can be summarized into three way calculations. The first one shows that the basic standard workspace and distance is applied in lab design. The second one shows that average space area criteria resulted from case studies is applied by 19㎡ per one staff, 0.9~1.0㎡ per one bed, and lastly linear length calculation of workbenches and analyzers on the bench top and floor mount, is multiplying it by the sum of the counter depth plus aisle width. Implications: In updating the space area calculation guidelines, it is necessary to cooperate with medical staffs and designers.

• Journal of Home Health Care Nursing
• /
• v.25 no.1
• /
• pp.37-46
• /
• 2018

Purpose: This descriptive study was conducted to identify burnout and factors influencing burnout in clinical nurses. Methods: A cross-sectional survey design was conducted by administering a structured questionnaire to 195 nurses working at hospitals, from August to September 2017. This study used scales to measure burnout (20 items), job satisfaction (16 items), and perfectionism (40 items). Data were analyzed using SPSS 22.0, descriptive statistics, t-test, ANOVA, Pearson's correlation coefficients, and multiple regression analysis. Results: Burnout of participants was correlated with job satisfaction and perfectionism. Factors identified to have influence on burnout were job satisfaction (${\beta}=-.35$, p<.001), perfectionism-fail avoidance (${\beta}=.26$, p=.001), perceived health status (${\beta}=-.26$, p<.001), and intention of department relocation (${\beta}=-.23$, p<.001). The regression model explained approximately 48% of nurses' burnout. Conclusion: Based on the results of this study, it is necessary to improve job satisfaction and organizational support to decrease dysfunctional perfectionism that could cause burnout in nurses. It is also necessary to establish a psychological support program in hospitals.

• Nuclear Engineering and Technology
• /
• v.32 no.4
• /
• pp.410-423
• /
• 2000

A two-dimensional numerical model is developed and applied to the LAVA-EXV tests performed at the Korea Atomic Energy Research Institute (KAERI) to investigate the external cooling effect on the thermal margin to failure of a reactor pressure vessel (RPV) during a severe accident. The computational program was written to predict the temperature profile of a two-dimensional spherical vessel segment accounting for the conjugate heat transfer mechanisms of conduction through the debris and the vessel, natural convection within the molten debris pool, and the possible ablation of the vessel wall in contact with the high temperature melt. Results of the sensitivity analysis and comparison with the LAVA-EXV test data indicated that the developed computational tool carries a high potential for simulating the thermal behavior of the RPV during a core melt relocation accident. It is concluded that the main factors affecting the RPV failure are the natural convection within the debris pool and the ablation of the metal vessel, The simplistic natural convection model adopted in the computational program partly made up for the absence of the mechanistic momentum consideration in this study. Uncertainties in the prediction will be reduced when the natural convection and ablation phenomena are more rigorously dealt with in the code, and if more accurate initial and time-dependent conditions are supplied from the test in terms of material composition and its associated thermophysical properties.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.5
• /
• pp.526-538
• /
• 2007

Since air quality monitoring data sets are important base for developing of air quality management strategies including policy making and policy performance assessment, the environmental protection authorities need to organize and operate monitoring network properly. Air quality monitoring network of Busan, consisting of 18 stations, was allocated under unscientific and irrational principles. Thus the current state of air quality monitoring networks was reassessed the effect and appropriateness of monitoring objectives such as population protection and sources surveillance. In the process of the reassessment, a GIS-based decision support system was constructed and used to simulate air quality over complex terrain and to conduct optimization analysis for air quality monitoring network with multi-objective. The maximization of protection capability for population appears to be the most effective and principal objective among various objectives. The relocation of current monitoring stations through optimization analysis of multi-objective appears to be better than the network building for maximization of population protection capability. The decision support system developed in this study on the basis of GIS-based database appear to be useful for the environmental protection authorities to plan and manage air quality monitoring network over complex terrain.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.1
• /
• pp.67-74
• /
• 2018

The rural areas are large residential space with fewer people than urban areas. That is why they are vulnerable to social services such as health care and security. This research analyzed the vulnerability of emergency relief service in rural village through text mining and the weighting value have been calculated. Based on the calculated statistics data, the police facilities are the most important, While the fire fighting and hospital facilities are important as well. In addition, the distance from the emergency relief service facility to the rural village was confirmed by using Open API. By combining these results, The vulnerable areas of the rural villages and the emergency relief service facilities were calculated and classified into 5 levels. For rural areas, the 1st class will have 33 places, following by 1,179 in 2nd class, 199 in 3rd class, 17 in 4th class and 8 in 5th class. Hence in order to further supplement the vulnerable areas to emergency relief service in villages, geographical relocation and policy approach of emergency relief service facilities are necessary.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1916-1938
• /
• 2019

The objective of this paper is to discuss the modeling principles of phenomena governing core degradation/melting and in-vessel melt relocation during severe accidents in light water reactors. The proposed modeling approach has been applied in the development of a new accident simulation package, COMPASS (COre Meltdown Progression Accident Simulation Software). COMPASS can be used either as a stand-alone tool to simulate in-vessel meltdown progression up to and including RPV failure, or as a component of an integrated simulation package being developed in Korea for the APR1400 reactor. Interestingly, since the emphasis in the development of COMPASS modeling framework has been on capturing generic mechanistic aspects of accident progression in light water reactors, several parts of the overall model should be useful for future accident studies of other reactor designs, both PWRs and BWRs. The issues discussed in the paper include the overall structure of the model, the rationale behind the formulation of the governing equations and the associated simplifying assumptions, as well as the methodology used to verify both the physical and numerical consistencies of the overall solver. Furthermore, the results of COMPASS validation against two experimental data sets (CORA and PHEBUS) are shown, as well as of the predicted accident progression at TMI-2 reactor.