• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.3
• /
• pp.62-68
• /
• 2012

In this paper, we propose an efficient transmission scheme for flight data. It is important to reduce amount of flight data transmitted effectively for timely transmission in airplane that the safety is very importantly recognized. Thus, this paper shows the improved technique transmitting after compressing flight data by the lossless compression technique. Because the proposed method improves the transmission speed of the flight data effectively. The processing of flight data and handling can be easily performed in the time to be restricted. The simulation results show that the proposed scheme achieves 25% data transfer gain compared to the ARINC 429 based transmission method.

• The KIPS Transactions:PartD
• /
• v.16D no.3
• /
• pp.371-380
• /
• 2009

Recently, lots of research on automated test data generation has been actively done. However, techniques for automated test data generation presented so far have been proved ineffective for programs with flag variables. It can present problems when considering embedded systems such as engine controllers that make extensive use of flag variables to record state information concerning devices. This paper introduces a technique for generating test data effectively for programs with flag variables. The presented technique transforms the test data generation problem into a SAT(SATisfiability) problem and makes advantage of SAT solvers for automated test data generation(ATDG). For the ends, we transform a program under test into Alloy which is the first-order relational logic and then produce test data via Alloy analyzer.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.22 no.1
• /
• pp.15-28
• /
• 2018

Recently Machine Learning algorithms are widely used to process Big Data in various applications and a lot of these applications are executed in run time. Therefore the speed of Machine Learning algorithms is a critical issue in these applications. However the most of modern iteration Machine Learning algorithms use a successive iteration technique well-known in Numerical Linear Algebra. But this technique has a very low convergence, needs a lot of iterations to get solution of considering problems and therefore a lot of time for processing even on modern multi-core computers and clusters. Tchebychev iteration technique is well-known in Numerical Linear Algebra as an attractive candidate to decrease the number of iterations in Machine Learning iteration algorithms and also to decrease the running time of these algorithms those is very important especially in run time applications. In this paper we consider the usage of Tchebychev iterations for acceleration of well-known K-Means and SVM (Support Vector Machine) clustering algorithms in Machine Leaning. Some examples of usage of our approach on modern multi-core computers under Apache Spark framework will be considered and discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.67-69
• /
• 2021

Weather radar images can be used in a variety of ways because of their high visibility in terms of visuals. In other words it has the advantage of being able to grasp the flow of weather phenomena using not only the raw data of the weather radar, but also the change characteristics between consecutive images. In particular image processing techniques are gradually expanding in the field of meteorological research, and in the case of image data having high resolution such as weather radar images it is expected to produce useful information through a new approach called image processing techniques. In this study the weather phenomena flow was calculated as a vector from the change of the weather radar image according to time interval with the optical flow method, one of the image processing techniques. The characteristics of the weather phenomena to be analyzed were derived through vector analysis resolution suitable for the scale of weather, vector interpolation in regions where no radar echo exists, and the removal of relative flow vectors to distinguish the flow of specific weather and the entire atmosphere. Through this study, it is expected that not only the use of raw data of weather radar, but also the widening of the application area of weather radar, such as the use of unique characteristics of image data, and the active use of image processing techniques in the field of meteorology in the future.

• Journal of KIISE:Databases
• /
• v.33 no.3
• /
• pp.342-352
• /
• 2006

Current studies on storing XML data are focused on either mapping XML data to existing RDBMS efficiently or developing a native XML storage. Some native XML storages store each XML node with parsed object form. Clustering, the physical arrangement of each object, can be an important factor to increase the performance with this storing method. In this paper, we propose re-clustering techniques that can store an XML document efficiently. Proposed clustering technique uses path similarities among data nodes, which can reduce page I/Os when returning query results. And proposed technique can process a path query only using small number of clusters as possible instead of using all clusters. This enables efficient processing of path query because we can reduce search space by skipping unnecessary data. Finally, we apply existing clustering techniques to store XML data and compare the performance with proposed technique. Our results show that the performance of XML storage can be improved by using a proper clustering technique.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.5
• /
• pp.433-437
• /
• 2006

Objectives: The aim of this study is to develop a methodology for estimating a nationwide statistic for hernia operations with using the claim database of the Korea Health Insurance Cooperation (KHIC). Methods: According to the insurance claim procedures, the claim database was divided into the electronic data interchange database (EDI_DB) and the sheet database (Paper_DB). Although the EDI_DB has operation and management codes showing the facts and kinds of operations, the Paper_DB doesn't. Using the hernia matched management code in the EDI_DB, the cases of hernia surgery were extracted. For drawing the potential cases from the Paper_DB, which doesn't have the code, the predictive model was developed using the data mining technique called SEMMA. The claim sheets of the cases that showed a predictive probability of an operation over the threshold, as was decided by the ROC curve, were identified in order to get the positive predictive value as an index of usefulness for the predictive model. Results: Of the claim databases in 2004, 14,386 cases had hernia related management codes with using the EDI system. For fitting the models with applying the data mining technique, logistic regression was chosen rather than the neural network method or the decision tree method. From the Paper_DB, 1,019 cases were extracted as potential cases. Direct review of the sheets of the extracted cases showed that the positive predictive value was 95.3%. Conclusions: The results suggested that applying the data mining technique to the claim database in the KHIC for estimating the nationwide surgical statistics would be useful from the aspect of execution and cost-effectiveness.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.3
• /
• pp.41-50
• /
• 2012

In the monitoring system based on web service application, it is faced with the problems like code reproduction, difficult scalability and error recovery derived from the frequent change of data structure. So we propose a technique of monitoring system by DTD(Document Type Definition) automatic generation. This technique is to use dynamic server-side script to cope with the change of sensor data structure, generate the DTD dynamically. An it also adapt the AJAX(Asynchronous JavaScript and XML) for XML data parsing, it can support mass data transmission and exception processing for data loss and damage. This technique shows the result of recovery time is decreased about 44.8ms in case of temporary data failure by comparing to the conventional XML method.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1088-1097
• /
• 2021

Vibration data of mechanical equipment inevitably have noise. This noise adversely af ects the maintenance of mechanical equipment. Accordingly, the performance of a learning model depends on how effectively the noise of the data is removed. In this study, the noise of the data was removed using the Denoising Auto Encoder (DAE) technique which does not include the characteristic extraction process in preprocessing time series data. In addition, the performance was compared with that of the Wavelet Transform, which is widely used for machine signal processing. The performance comparison was conducted by calculating the failure detection rate. For a more accurate comparison, a classification performance evaluation criterion, the F-1 Score, was calculated. Failure data were detected using the One-Class SVM technique. The performance comparison, revealed that the DAE technique performed better than the Wavelet Transform technique in terms of failure diagnosis and error rate.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.9
• /
• pp.349-354
• /
• 2014

Since Hadoop which is the Big-data processing platform was announced, SQL-on-Hadoop is the spotlight as the technique to analyze data using SQL on Hadoop. Tajo created by Korean programmers has recently been promoted to Top-Level-Project status by the Apache in April and has been paid attention all around world. Despite a sensible change caused by Hadoop's appearance in DW market, researches of those performance is insufficient. Thus, this study has been conducted to help choose a DW solution based on SQL-on-Hadoop as progressing the test on comparison analysis of RDBMS and Tajo. It has shown that Tajo based on Hadoop is more superior than RDBMS if it is used with accurate strategy. In addition, open-source project Tajo is expected not only to achieve improvements in technique due to active participation of many developers but also to be in charge of an important role of DW in the filed of data analysis.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.11
• /
• pp.319-328
• /
• 2023

Unlike cloud computing, edge computing technology analyzes and judges data close to devices and users, providing advantages such as real-time service, sensitive data protection, and reduced network traffic. EdgeX Foundry, a representative open source of edge computing platforms, is an open source-based edge middleware platform that provides services between various devices and IT systems in the real world. EdgeX Foundry provides a service for handling camera devices, along with a service for handling existing sensed data, which only supports simple streaming and camera device management and does not store or process image data obtained from the device inside EdgeX. This paper presents a technique that can store and process image data inside EdgeX by applying some of the services provided by EdgeX Foundry. Based on the proposed technique, a service pipeline for object detection services used core in the field of autonomous driving was created for experiments and performance evaluation, and then compared and analyzed with existing methods.