• Journal of The Korean Association For Science Education
• /
• v.35 no.3
• /
• pp.487-498
• /
• 2015

This research is for acquiring implications to science education based on learner's characteristics by analyzing the relationship between contents on science learning and cognitive domain of students in elementary schools through TIMSS 2011-based academic achievement test. Forty one multiple choice items from by TIMSS 2011 were used on 317 primary school students, fourth to sixth grade, and according to grade and achievement level of research targets, test results were analyzed. With these data, the relationship between contents on science learning and the score by cognitive domains, and through correlation by items, we drew static and negative correlations, and then compared the value. The result are as follows: First, other fields except for 'physical science' and 'inference' revealed meaningful differences by learners' grade, and the interrelationship between all contents domains and cognitive fields also appeared statically different. Second, both achievement level of contents and cognition of learners presented significant differences, but the correlation between scientific contents and cognitive field of learners showed different aspects. Third, in static and negative correlation by items, the complexity and their aspects could be classified by targets' academic achievement levels.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.8 s.338
• /
• pp.15-26
• /
• 2005

In this paper, we propose an efficient $GF(2^m)$ multi-segment multiplier architecture and study its application to elliptic curve cryptography processors. The multi-segment based ECC datapath has a very small combinational multiplier to compute partial products, most of its internal data buses are word-sized, and it has only a single m bit multiplexer and a single m bit register. Hence, the resource requirements of the proposed ECC datapath can be minimized as the segment number increases and word-size is decreased. Hence, as compared to the ECC processor based on digit-serial multiplication, the proposed ECC datapath is more efficient in resource usage. The resource requirement of ECC Processor implementation depends not only on the number of basic hardware components but also on the complexity of interconnection among them. To show the realistic area efficiency of proposed ECC processors, we implemented both the ECC processors based on the proposed multi-segment multiplication and digit serial multiplication and compared their FPGA resource usages. The experimental results show that the Proposed multi-segment multiplication method allows to implement ECC coprocessors, requiring about half of FPGA resources as compared to digit serial multiplication.

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.289-295
• /
• 2006

A computational fluid dynamics (CFD) numerical model has been developed to effectively study the ventilation efficiency of multi-span greenhouses with internal crops. As the first step of the study, the internal plants of the CFD model had to be designed as a porous media because of the complexity of its physical shapes. In this paper, the results of the wind tunnel tests were introduced to find the aerodynamic resistance of the plant canopy. The Seogun tomato was used for this study which made significant effects on thermal and mass exchanges with the adjacent air as well as internal airflow resistance. With the main factors of wind speed, static pressure, and density of plant canopy, the aerodynamic resistance factor was statically found. It was finally found to be 0.26 which will be used later as an input data of the CFD model. Moreover, the experimental procedure of how to find the aerodynamic resistance of various plants using, wind tunnel was established through this study.

• Journal of Gifted/Talented Education
• /
• v.24 no.1
• /
• pp.113-147
• /
• 2014

This study is a case study of the process of emerging for creative products to lead world science and technology. The aim of the study is to understand the emerging process of scientific creative products, and is to provide the direction of gifted education that discovers and trains globally competitive science talents through this. To discuss the emerging process of creative products, this study has academically discussed the creativity of the complexity of dealing with theory of evolution, the real life settings, and self-organization of experience etc., and has methodologically adopted the qualitative research method through a case study to look at the structures and processes. Data collection has been formed through a discussion with 12 Korean scientists who have created selected creative products, greatly contributed for the world science and technology(12 areas). The analysis has been carried out by the latter part positivist methods. As a result, the emerging process of creative products in the field of science and technology were separated into four steps: (1)the foundation stage of knowledge, (2)the exploration stage of knowledge, (3)the construction stage of knowledge, and (4)the emerging stage of knowledge. Each stage has been revealed growing up through the macro-system and the self-organization of each micro-systems.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.1
• /
• pp.97-107
• /
• 2002

In this paper, we propose the realization of on-line handwritten Chinese character recognition for mobile personal digital assistants (PDA). We focus on the development of an algorithm having a high recognition performance under the restriction that PDA requires small memory storage and less computational complexity in comparison with PC. Therefore, we use index matching method having computational advantage for fast recognition and we suggest a unit reconstruction method to minimize the memory size to store the character models and to accomodate the various changes in stroke order and stroke number of each person in handwriting Chinese characters. We set up standard model consisting of 1800 characters using a set of pre-defined units. Input data are measured by similarity among candidate characters selected on the basis of stroke numbers and region features after preprocessing and feature extracting. We consider 1800 Chinese characters adopted in the middle and high school in Korea. We take character sets of five person, written in printed style, irrespective of stroke ordering and stroke numbers. As experimental results, we obtained an average recognition time of 0.16 second per character and the successful recognition rate of 94.3% with MIPS R4000 CPU in PDA.

• Journal of Software Engineering Society
• /
• v.27 no.1
• /
• pp.8-14
• /
• 2018

As cloud computing has emerged as a hot trend in the IT industry, various types of cloud services have emerged. In addition, cloud service broker (CSB) technology has emerged to alleviate the complexity of the process of selecting the desired service that user wants among the various cloud services. One of the key features of the CSB is to recommend the best cloud services to users. In general, CSB can use a method to evaluate a service by receiving feedback about a service from users in order to recommend a cloud service. However, since each user has different criteria for giving a rating, there is a problem that reliability of service evaluation can be low when the rating is only used. In this paper, a method is proposed to supplement evaluation of rating based service by applying machine learning based sentiment analysis to cloud service user's review. In addition, the CSB prototype is implemented based on proposed method. Further, the results of comparing the performance of various learning algorithms is proposed that can be used for sentiment analysis through experiments using actual cloud service review as learning data. The proposed service evaluation method complements the disadvantages of the existing rating-based service evaluation and can reflect the service quality in terms of user experience.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.323-333
• /
• 2015

Objective : The purpose of this study was to investigate the changes of gait patterns and muscle activations with increased loads during stair walking. Also, it can be used as descriptive data about continuous stair walking in a real life setting. Method : Twelve sedentary young male adults(Age: $27.0{\pm}1.8yrs$, Weight: $65.8{\pm}9.9kg$) without any lower extremity injuries participated in this study. Participants performed stair walking up 7 floors and their ascending and descending motion on each floor was analyzed. A wireless electromyography(EMG) were attached on the Rectus Femoris(RF), Biceps Femoris(BF), Gastrocnemius(GN), Tibialis Anterior(TA) muscle to calculate integrated EMG(iEMG), median frequency(MDF) and co-contraction index(CI). Chest and left heel accelerometer signal were recorded by wireless accelerometer and those were used to calculate approximate entropy(ApEn) for analyzing gait pattern. All analyses were performed with SPSS 21.0 and for repeated measured ANOVA and Post-hoc was LSD. Results : During ascending stairs, there were a statistically significant difference in Walking time between 1-2nd and other floors(p=.000), GN iEMG between 2-3th and 6-7th(p=.043) floor, TA MDF between 1-2nd and 5-6th(p=.030), 6-7th(p=.015) floor and TA/GN CI between 2-3th and 6-7th(p=.038) floor and ApEn between 1-2nd and 6-7th(x: p=.003, y: p=.005, z: p=.006) floor. During descending stairs, there were a statistically significant difference in TA iEMG between the 6-5th and 3-2nd(p=.026) floor, and for the ApEn between the 1-2nd and 6-7th(x: p=.037, y: p=.000, z: p=.000) floor. Conclusion : Subjects showed more regular pattern and muscle activation response caused by regularity during ascending stairs. Regularity during the first part of stair-descending could be a sign of adaptation; however, complexity during the second part could be a strategy to decrease the impact.

• Journal of agricultural medicine and community health
• /
• v.20 no.1
• /
• pp.51-60
• /
• 1995

This study was to examine the awareness of health and the utilization of primary health care in rural areas. The data were obtained from self-administered questionnaire conducted 450 parents of Mi Gum md Su Dong middle school students in Nam yang Ju city, Kyung Gi-Do, Korea, from December 15 to 20 in 1993. The results were as follows : 1) Among the causes of disease, 'insufficient health care' was the highest(39.1%), and 'bad environment'(28.9%), 'complexity of life style'(17.8%) in next order. 2) In the priority between 'daily farm work' and 'primary health care', only 45.6% of respondents answered that primary health care is more important than the daily farm work. The 29.8% of respondents answered 'daily farm work', and the 23.1% answered 'the equal of the both'. 3) The 63.6% of the respondents recognized correctly, the meaning of primary health care. And the rate of information source in primary health care were 'TV and Radio'(42.2%), 'medical facilities'(23.3%), and 'newspaper and magazine'(11.3%) in order. 4) In the choice rate of medical facilities for primary health care, 'drug store' was the highest(34.9%), and 'local private clinic'(34.7%), 'health (sub)center'(15.8%), 'hospital'(10.2%) in next order. 5) The 53.5% of the respondents had experienced to visit the health (sub)center more than once. And the disfavorite reasons of health (sub)center were 'insufficient equipment'(36.7%), 'inavailable time to visit'(26.9%), and 'poor treatment'(9.1%). 6) Among the preference of the physicians for primary health care, 'specialist' was the highest rate of the respondents(54.2%), and 'general practitioner'(32.4%), and 'family doctor'(9.8%) in next order. The major obstacles in utilizing the medical facilities for primary health care were 'daily farm work'(41.6%), 'distance'(21.1%) and 'medical cost'(10.4%) in order. 7) The weakened reasons in health (sub)center function were 'insufficient medical equipment'(44.4%), 'the lack of resident's understanding for health (sub)center'(21.8%), and 'short thought of duty in health (sub)center personnel'(16.9%) in order.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.3-12
• /
• 2015

Recently, various studies have been attempted to provide a biological information monitoring service through integrating with the web service. The medical information transmission standard ISO/IEEE 11073 PHD defines the optimized exchange protocol ISO/IEEE 11073-20601 based on the No-IP to exchange the biometric information between the ISO/IEEE 11073 agent and the manager. It's system structure based on the No-IP using ISO/IEEE 11073-20601 is not suitable for providing a remote biological information monitoring services. That is because it is difficult to provide to control and manage the biological information measurement devices, which have installed IP protocol stack at the remote. Furthermore, ACSE and CMDISE in ISO/IEEE 11073-20601 are not suitable to provide U-healthcare services based on IoT because they are complicated and difficult to implement it caused by the structural complexity. In order to solve the problems, in this paper, we propose the biological information monitoring architecture based on ISO/IEEE 11073 DIM/REST of IoT environment to provide the biological information monitoring service based on IoT. To do this, we designed biological information monitoring system architecture based on IoT and the message exchange protocol of ISO/IEEE 11073 DIM/REST between the ISO/IEEE 11073 agent and the ISO/IEEE 11073 manager. In order to verify the realistic possibility of the proposed system architecture, we developed the service prototype.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.46-51
• /
• 2013

In this paper, the optimum placement and shape of UHF antenna on the unmanned aerial vehicle (UAV) are analyzed by using the electromagnetic (EM) simulation on the various locations. The FEKO was used for the EM-simulation. In order to reduce the complexity of simulation and minimize the runtime and memory usage, the composite aircraft structure is simplified as the PEC model excluding the radome structure. The simulation was performed on the wing and ventral fin of UAV, and the antenna shape used the monopole, dipole, and bent monopole antennas. When the monopole antenna is mounted under the wing, two antennas need to be mounted under the right and left wings, and those antennas have to be switched as the direction of UAV wing to the line of sight (LOS) data-link (DL) ground antenna. In the case of mounting under the ventral fin, one antenna can be used regardless of the direction of UAV wing to the LOS DL ground antenna. Also, the antenna gain is improved by the blockage reduction. The antenna gain is further improved by using the bent monopole antenna. The optimum solution of UHF antenna placement and shape on UAV is to mount the bent monopole antenna under the ventral fin.