• Journal of Korean Society of Disaster and Security
• /
• v.13 no.2
• /
• pp.53-63
• /
• 2020

In this study, the two-dimensional flow analysis model Hydro_AS-2D model was used to simulate the situation of flooding in Seongsangu and Uichang-gu in Changwon in the event of rising sea levels and extreme flooding, and the results were expressed on three-dimensional topography and the optimal evacuation path was derived using BIM technology. Climate change significantly affects two factors in terms of flood damage: rising sea levels and increasing extreme rainfall ideas. The rise in sea level itself can not only have the effect of flooding coastal areas and causing flooding, but it also raises the base flood level of the stream, causing the rise of the flood level throughout the stream. In this study, the rise of sea level by climate change, the rise of sea level by storm tidal wave by typhoon, and the extreme rainfall by typhoon were set as simulated conditions. The three-dimensional spatial information of the entire basin was constructed using the information of topographical space in Changwon and the information of the river crossing in the basic plan for river refurbishment. Using BIM technology, the target area was constructed as a three-dimensional urban information model that had information such as the building's height and location of the shelter on top of the three-dimensional topographical information, and the results of the numerical model were expressed on this model and used for analysis for evacuation planning. In the event of flooding, the escape route is determined by an algorithm that sets the path to the shelter according to changes in the inundation range over time, and the set path is expressed on intuitive three-dimensional spatial information and provided to the user.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.613-620
• /
• 2021

A flow channel shape of PEMFC has an influence on the internal flow uniformity. If the reactant distribution in a flow path is not uniform during operation, both catalyst deactivation and mechanical damage of membrane could occur resulting in decreasing the membrane electrode assembly (MEA) durability. Numerous studies concerning flow design have been conducted to make smooth supply and uniform distribution of reactants in fuel cells. The baffle of flow path could improve fuel cell performance through the forced convection effect. A sub-channel, as an additional air flow path, could increase the reactant concentration and reduce the mass transfer loss via a smooth water discharge. In this study, computational fluid dynamics (CFD) was used to analyze the effect of blocks and sub-channels on the current density and oxygen concentration of the fuel cell. As a result, the limit current density and oxygen concentration at a rear block increased when using blocks and sub-channels in a flow channel. In particular, the current density increased significantly when the sub-channel was placed between two blocks. Also, the sub-channel position was optimized by analyzing the oxygen concentration, and the oxygen concentration was recovered at a rear block in the fuel cell.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.1
• /
• pp.25-38
• /
• 2022

Urban problems are constantly occurring around the world due to rapid industrialization and population decline. In particular, as the number of vacant houses is gradually increasing as the population decreases, it is necessary to prepare countermeasures. A plan to utilize vacant houses has emerged to restore the natural environment of the urban ecosystem where forest destruction, damage to habitats of wild animals and plants, and disconnection have occurred due to large-scale development. Through connectivity analysis, it is possible to understand the overall ecosystem flow based on the movement of species and predict the effect when vacant houses are converted into green spaces. Therefore, this study analyzed the green area network to confirm the possibility of greening of vacant houses neglected in Jeonju based on circuit theory. Using Circuitscape and Least-cost path, we tried to identify the connectivity of green areas and propose an ecological axis based on the analysis. In order to apply the resistance values required for analysis based on previous studies, the 2020 subdivision land cover data were integrated into the major classification evaluation items. When the eight forests in the target site were analyzed as the standard, the overall connectivity and connectivity between forests in the area were high, so it is judged that the existing green areas can perform various functions, such as species movement and provision of habitats. Based on the results of the connectivity analysis, the importance of vacant houses was calculated and the top 20 vacant houses were identified, and it was confirmed that the higher the ranking, the more positive the degree of landscape connectivity was when converted to green areas. In addition, it was confirmed that the results of analyzing the least-cost path based on the resistance values such as connectivity analysis and the existing conceptual map showed some differences when comparing the ecological axes in the form. As a result of checking the vacant houses corresponding to the relevant axis based on the width standards of the main and sub-green areas, a total of 30 vacant houses were included in the 200m width and 6 vacant houses in the 80m width. It is judged that the conversion of vacant houses to green space can contribute to biodiversity conservation as well as connectivity between habitats of species as it is coupled with improved green space connectivity. In addition, it is expected to help solve the problem of vacant houses in the future by showing the possibility of using vacant houses.

• Convergence Security Journal
• /
• v.12 no.1
• /
• pp.3-8
• /
• 2012

MANET composed wireless nodes without fixed infrastructure provides high flexibility, but it has weak disadvantage to various attack. It has big weakness to DDoS attack because every node perform packet forwarding especially. In this paper, packet transmission information control technique is proposed to reduce damage of DDoS attack in MANET and search location of attacker when DDoS attacks occur. Hierarchical structure using gateway node is adopted for protect a target of attack in this study. Gateway node in cluster is included like destination nodes surely when source nodes route path to destination nodes and it protects destination nodes. We confirmed efficiency by comparing proposed method in this study with CUSUM and measured the quantity consumed memory of cluster head to evaluate efficiency of information control using to location tracing.

• Corrosion Science and Technology
• /
• v.12 no.5
• /
• pp.227-232
• /
• 2013

A number of components installed in the secondary system of nuclear power plants are exposed to aging mechanisms such as FAC (Flow-Accelerated Corrosion), Cavitation, Flashing, and LDIE (Liquid Droplet Impingement Erosion). Those aging mechanisms can lead to thinning of the components. In April 2013, one (1) inch small bore piping branched from the main steam line experienced leakage resulting from wall thinning in a 1,000 MWe Korean PWR nuclear power plant. During the normal operation, extracted steam from the main steam line goes to condenser through the small bore piping. The leak occurred in the downstream of an orifice. A control valve with vertical flow path was placed on in front of the orifice. This paper deals with UT (Ultrasonic Test) thickness data, SEM images, and numerical simulation results in order to analyze the extent of damage and the cause of leakage in the small bore piping. As a result, it is concluded that the main cause of the small bore pipe wall thinning is liquid droplet impingement erosion. Moreover, it is observed that the leak occurred at the reattachment point of the vortex flow in the downstream side of the orifice.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.127-131
• /
• 1999

Typhoons were known by contributing to transporting plus heat or kinetic energy from equatorial region to midlatitude region. Due to the strong damage from typhoon, we acknowledged the theoretical study and the importance of accurate forecast about typhoon. In this study, typhoon forecasting system was developed to search the tracks of past typhoons or to display similar track of past typhoon in comparison with the path of current forecasting typhoon. It was programmed using Interactive Data Language(IDL), which was a complete computing environment for the interactive analysis and visualization of data. Typhoon forecasting system was also included satellite image and auxiliary chart. IR, Water Vapor, Visible satellite images helped users analyze an accurate forecast of typhoon. They were further refined the procedures for generating water vapor winds and gave an initial indication of their utility for numerical weather prediction(NWP), in particular for typhoon track forecasting where they could provide important information. They were also available for its utility in typhoon tracer or intensity.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.1
• /
• pp.43-50
• /
• 2014

This paper introduces a robot platform which can do weeding while traveling between rice seedlings stably against irregular land surface of a paddy field. Also, an autonomous navigation technique that can track on stable state without any damage of the seedlings in the working area is proposed. Detection of the rice seedlings and avoidance knocking down by the robot platform is achieved by the sensor fusion of a laser range finder (LRF) and an inertial measurement unit (IMU). These sensors are also used to control navigating direction of the robot to keep going along the column of rice seedling consistently. Deviation of the robot direction from the rice column that is sensed by the LRF is fed back to a proportional and derivative controller to obtain stable adjustment of navigating direction and get proper returning speed of the robot to the rice column.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.7
• /
• pp.1721-1736
• /
• 2013

Black and gray hole attack is one kind of routing disturbing attacks and can bring great damage to the network. As a result, an efficient algorithm to detect black and gray attack is important. This paper demonstrate an adaptive approach to detecting black and gray hole attacks in ad hoc network based on a cross layer design. In network layer, we proposed a path-based method to overhear the next hop's action. This scheme does not send out extra control packets and saves the system resources of the detecting node. In MAC layer, a collision rate reporting system is established to estimate dynamic detecting threshold so as to lower the false positive rate under high network overload. We choose DSR protocol to test our algorithm and ns-2 as our simulation tool. Our experiment result verifies our theory: the average detection rate is above 90% and the false positive rate is below 10%. Moreover, the adaptive threshold strategy contributes to decrease the false positive rate.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.28-34
• /
• 2018

Recently, various engineering approaches have been widely used in the accident investigation field to identify the cause of the accident and to predict damage by accident. Computational analysis is the most commonly used method of accident investigation technique. This technique is mainly used to identify the mechanism of the accident generation and to determine the cause when it is difficult to reproduce the situation at the time of the accident or when it is impossible to perform a reproduction experiment. In this study, The computational fluid dynamics analysis for nitrogen asphyxiation accident generated by defect of building structural between diffusion outlet and cooling tower was performed to determine the inflow path of the suffocation gas, death possibility by concentration of suffocation gas and predicted the time of death due to the accident using 3D modeling and FLACS program. We can quantify diffusion concentration of asphyxiation gas and predict mechanism of death occurrence by accident and evaluate the consequence Analysis through this study. In the future, This method can be widely used in the field of gas safety by improving the reliability and validity of the analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1594-1597
• /
• 2005

A rapid development and a wide use of the Internet have expanded a network environment. Further, the network environment has become more complex due to a simple and convenient network connection and various services of the Internet. However, the Internet has been constantly exposed to the danger of various network attacks such as a virus, a hacking, a system intrusion, a system manager authority acquisition, an intrusion cover-up and the like. As a result, a network security technology such as a virus vaccine, a firewall, an integrated security management, an intrusion detection system, and the like are required in order to handle the security problems of Internet. Accordingly, a router, which is a key component of the Internet, controls a data packet flow in a network and determines an optimal path thereof so as to reach an appropriate destination. An error of the router or an attack against the router can damage an entire network. This paper relates to a method for RSMS (router security management system) for secure networking based on a security policy. Security router provides functions of a packet filtering, an authentication, an access control, an intrusion analysis and an audit trail in a kernel region. Security policy has the definition of security function against a network intrusion.