• Steel and Composite Structures
• /
• 제1권3호
• /
• pp.283-294
• /
• 2001

In the present work a constitutive model is developed which permits the assessment of the structural performance through a criterion based on cumulative damage. For it, a damage index is defined and is evaluated through the application of the Miner's rule in low-cycle fatigue. However, the damage index is not considered as a posteriori variable since is incorporated explicitly as an internal variable in the constitutive equations which produces a direct coupling between the damage and the structural mechanical behaviour allowing the possibility of considering as a whole different coupled phenomena. For the elaboration of this damage model, the concepts of the mechanics of continuum medium are applied on lumped dissipative models in order to obtain a coupled simplified model. As a result an elastoplastic model coupled with damage and fatigue damage is obtained.

• Geomechanics and Engineering
• /
• 제12권2호
• /
• pp.269-294
• /
• 2017

This study aimed to realize the creation of fuzzy stochastic damage to describe reliability more essentially with the analysis of harmony of damage conception, probability and fuzzy degree of membership in interval [0,1]. Two kinds of fuzzy behaviors of damage development were deduced. Fuzzy stochastic damage models were established based on the fuzzy memberships functional and equivalent normalization theory. Fuzzy stochastic damage finite element method was developed as the approach to reliability simulation. The three-dimensional fuzzy stochastic damage mechanical behaviors of Jianshan mine slope were analyzed and examined based on this approach. The comprehensive results, including the displacement, stress, damage and their stochastic characteristics, indicate consistently that the failure foci of Jianshan mine slope are the slope-cutting areas where, with the maximal failure probability 40%, the hazardous Domino effects will motivate the neighboring rock bodies' sliding activities.

• 한국해양환경ㆍ에너지학회지
• /
• 제11권2호
• /
• pp.86-91
• /
• 2008

연근해를 운항하는 선박의 경우, 선저가 암초 상에 올라앉는 정지형 좌초(stranding)를 당할 확률이 상대적으로 높다. 손상을 입은 선박의 최종강도는 저하할 것이다. 본 논문에서는 시리즈 붕괴실험을 수행하여 선체구조의 최종강도에 대한 정지형 좌초손상의 영향을 파악하고자 하였다. 단면이 720 mm $\times$ 720 mm이고, 시험체의 길이가 900 mm인 5개의 박스 거더형 모형이 제작되었으며, 각 판 부재에는 종보강재가 부착되어 있다. 5개의 모델 중에는 1개의 비손상 모형과 암초 단면을 이상화한 마름모꼴 손상을 가진 4개의 손상 모형이 있다. 손상 모형 중 3개는 손상부의 판을 잘라 내었으며, 때는 보다 실제적인 좌초손상을 표현하기 위해 프레스 가공하였다. 최종강도 실험은 순수 굽힘 하중 하에서 수행되었으며, 작용하중과 선저판의 변위를 계측하였다. 실험 결과, 최종강도는 손상의 크기가 증가할수록 감소하였다. 손상이 선폭의 30%에 이르는 가장 큰 손상 모형의 최종강도는 비손상 모형에 비해 약 21%정도 감소되었다. 프레스 가공한 손상 모형의 최종강도는 손상부를 잘라 내어 제거한 모형에 비해 낮았다 이는 프레스 가공한 손상부의 판이 최종강도를 떨어뜨리는 쪽으로 작용한 것으로 생각된다.

• 한국터널지하공간학회 논문집
• /
• 제25권3호
• /
• pp.187-200
• /
• 2023

본 연구에서는 주변 환경에 따른 굴착식 터널의 지진취약도 변화에 대한 분석을 진행하고 대표 지진취약도 모델을 제시하였다. 기 개발된 굴착식 터널의 지진취약도 모델들에 대한 분석을 진행한 후 각 모델들에 가중치를 부여하여 주변 환경에 맞게 새로 가중조합한 모델을 개발하였다. 주변 환경은 굴착식 터널 주변의 지반조건과 매설 깊이를 고려하였다. 지진취약도 곡선의 피해 발생 확률은 최대지반가속도(PGA)를 매개변수로 하여 결정된다. PGA가 0.3 g일 때 매설 깊이가 50 m이하의 조건에서는 경미한 손상을 초과하는 피해 확률이 20%, 매설 깊이가 50 m 이상 100 m 이하의 조건에서는 피해 확률이 10%, 매설 깊이 100 m 이상의 조건에서는 피해 확률이 3% 이하로 매설 깊이에 따라 피해 확률이 점차 낮아지는 것을 확인하였다. 또한 주변 지반이 토양으로 되어있을 때보다 암반으로 되어있을 때 동일한 지표의 PGA에 대해 같은 매설 깊이에서 피해 확률이 크게 나타나며, 매설 깊이가 깊어질수록 피해 확률이 작아진다. 이 연구는 향후 터널의 종합적 지진취약도 함수 개발에 유용하게 사용될 것으로 기대된다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1996년도 학술발표회
• /
• pp.37-42
• /
• 1996

The assessment of catastrophic accidents such as BLEVE, vapor cloud explosion, and toxic material releases in the chemical process industries(CPI) shall be carried out according to the Requirement of PSM/SMS enforced by Korea Government Agencies, but reasonable models are not proposed for the practical application. The traditional models, TNT Equivalency Model, are well-known and helpful for the assessment of vapor cloud explosion. However, the estimated-damage-area using the traditional model has much more deviations comparing to the real damage caused by vapor cloud explosion suffered before. These are why an expert system for the assessment of vapor cloud explosion has been developed, which is based on theoretical, statistical and experimental data, and it would be helpful for CPI to evaluate the damage-area in case of vapor cloud explosion.

• 한국군사과학기술학회지
• /
• 제19권4호
• /
• pp.424-434
• /
• 2016

A few blast experiments are conducted to investigate the behavior of one-way reinforced concrete(RC) slabs under blast loading. Reflected blast characteristics as well as displacements and damage patterns of RC slabs are measured. Numerical models are also established in the software ANSYS AUTODYN to reproduce the experiments on RC slabs. The numerical models are distinguished from each other by different boundary conditions at the edges of RC slabs, which are assumed to reproduce displacements and damage patterns resulted from the experiments. The boundary condition of the experimental tests is estimated from the numerical simulation results. From the numerical simulation results, the boundary condition should be improved in order to measure the accurate maximum displacement in the experimental tests.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1142-1147
• /
• 2004

In this study, two damage detection techniques are applied to the railway tunnel liner based on the static deformation data. Models based on uniform reduction of stiffness and smeared crack concept are both employed, and the efficiency and relative advantage are compared with each other. Numerical analyses are performed on the idealized tunnel structure and the effect of white noise, common in most measurement data, is also investigated to better understand the suitability of the proposed models. As a result, model 1 based on uniform stiffness reduction method is shown to be relatively insensitive to the noise, while model 2 with the smeared crack concept is proven to be easily applied to the field situation since the effect of stiffness reduction is rather small. Finally, real deformation data of a rail tunnel in which health monitoring system is in operation are introduced to find the possible damage and it is shown that the prediction shows quite satisfactory result.

• Structural Monitoring and Maintenance
• /
• 제4권4호
• /
• pp.365-379
• /
• 2017

This paper presents a comparison of the black-box and the physics based derived gray-box models for subspace identification for structures subjected to support-excitation. The study compares the damage detection capabilities of both these methods for linear time invariant (LTI) systems as well as linear time-varying (LTV) systems by extending the gray-box model for time-varying systems using short-time windows. The numerically simulated IASC-ASCE Phase-I benchmark building has been used to compare the two methods for different damage scenarios. The efficacy of the two methods for the identification of stiffness parameters has been studied in the presence of different levels of sensor noise to simulate on-field conditions. The proposed extension of the gray-box model for LTV systems has been shown to outperform the black-box model in capturing the variation in stiffness parameters for the benchmark building.

• Computers and Concrete
• /
• 제12권5호
• /
• pp.585-612
• /
• 2013

The paper presents quasi-static numerical simulations of the behaviour of short reinforced concrete beams without shear reinforcement under mixed shear-tension failure using the FEM and four various constitutive continuum models for concrete. First, an isotropic elasto-plastic model with a Drucker-Prager criterion defined in compression and with a Rankine criterion defined in tension was used. Next, an anisotropic smeared crack and isotropic damage model were applied. Finally, an elasto-plastic-damage model was used. To ensure mesh-independent FE results, to describe strain localization in concrete and to capture a deterministic size effect, all models were enhanced in a softening regime by a characteristic length of micro-structure by means of a non-local theory. Bond-slip between concrete and reinforcement was considered. The numerical results were directly compared with the corresponding laboratory tests performed by Walraven and Lehwalter (1994). The advantages and disadvantages of enhanced models to model the reinforced concrete behaviour were outlined.

• 한국지진공학회논문집
• /
• 제21권6호
• /
• pp.311-322
• /
• 2017

In this study, the seismic performance of concrete-steel composite moment frame structures equipped with seismic retrofitting systems such as seismic reinforcement, base isolators, and bracing members, which are typical earthquake damage mitigation systems, is evaluated through nonlinear dynamic analyses. A total of five frame models were designed and each frame model was developed for numerical analyses. A total of 80 ground acceleration data were used to perform the nonlinear dynamic analysis to measure ground shear force and roof displacement, and to evaluate the behavioral performance of each frame model by measuring inter-story drift ratios. The analysis results indicate that the retrofitting device of the base isolator make a significant contribution to generating relatively larger absolute displacement than other devices due to flexibility provided to interface between ground and column base. However, the occurrence of the inter-story drift ratio, which is a relative displacement that can detect the damage of the structure, is relatively small compared with other models. On the other hand, the seismic reinforced frame model enhanced with the steel plate at the lower part of the column was found to be the least efficient.