• 지구물리
• /
• 제9권4호
• /
• pp.333-341
• /
• 2006

준공 후 상당한 시간이 경과한 댐에 대해서 안정성을 판단하거나 관리하는 방법은 극히 제한적이다. 댐체의 변형 특성을 확인하기 위해서는 침하계와 같이 1 point에 대한 거동만 분석을 실시하였으나, 댐체의 전체적인 변형특성을 파악 할 수 없었다. 따라서 본 연구에서는 지상 레이저 스캐닝을 이용하여 댐체의 전체적인 변형 특성을 분석하였으며, 댐체에 설치된 표면 침하계 결과와 비교하였다. 레이저 스캐닝 자료와 표면 침하계 결과를 분석한 결과 연구대상댐은 댐체의 자중에 의한 변형거동을 보이고 있다고 판단 할 수 있었고, 현시점에서의 댐체는 안정화 단계에 접어들고 있다는 것을 확인할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.528-541
• /
• 2007

To get the possible for management and maintenance, it was analyzed the deformation characteristics, such as crest of embankment and concrete face slab, and leakage of concrete faced rockfill dams (CFRD). There are trends that embankment deformation depends on intact strength used rockfills rather than dam height, deformation normal to concrete face slab during the first reservoir filling is occurred more than 80% of the total deformation in general, and the magnitude and trend of concrete face slab deformation is similar to post-construction crest settlement. The results showed that the range of post-construction crest settlement suggested by Sherard and Cooke (1987), and Clements (1984) had a good agreement in the cases using rockfill with very high intact strength, but it had a trend which underestimated crest settlement in the cases using rockfill with medium to high intact strength. The maximum leakage rate in general was observed during the first reservoir filling and long-term leakage rate was rapidly increased when the dam height exceeds approximately 120m.

• 한국지반환경공학회 논문집
• /
• 제14권11호
• /
• pp.33-46
• /
• 2013

본 연구는 최근 기상이변의 영향으로 활발히 진행 중인 댐 치수능력사업의 일환으로, 운영 중인 콘크리트 표면차수벽형석괴댐(Concrete Face Rockfill Dam, CFRD)에서 측정된 계측결과와 시간 의존적 점탄성모델인 Kelvin 모델을 회귀분석하여 댐완공 이후 추가적인 하중증가 없이도 발생되고 있는 크리프(Creep)와 같은 댐의 장기 변형특성을 예측하고, 이와 같은 댐의 변형특성이 댐 제체를 구성하는 재료의 물리적 특성치(E, G, K) 변화에 미치는 영향을 분석하였다. 또한 댐의 장기적인 변형거동에 따른 물리적 특성치 변화가 댐 안정성에 미치는 영향과 댐 증고 시 댐의 장기적인 안정성 확보를 위한 합리적인 댐 안정성 평가방법을 제시하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.663-666
• /
• 2008

For a fill dam, when a long time has passed since its completion, it is very hard to judge its safety and to maintain effectively it due to limitation and restriction in data showing safety status. Conventional method based on a specific point data by surface settlement gauge is commonly used to define deformation characteristic of dam. However, point data-based deformation analysis cannot provide deformation data of the entire dam. In this study a state-of-the-art terrestrial laser scanning technology is introduced to analyze the entire deformation of dam. As a result, it is known that 3D scanning technique can also be effectively used in evaluating dam safety and then establishing adequate maintain plan.

• Computers and Concrete
• /
• 제18권6호
• /
• pp.1153-1173
• /
• 2016

According to deformation data measured in some high concrete dams, for dam body deformation, there is a complex relationship with dam height and water head for different projects, instead of a simple monotonic relationship consistently. Meanwhile, settlement data of some large reservoirs exhibit a significant deformation of reservoir basin. As water conservancy project with high concrete dam and large storage capacity increase rapidly these decades, reservoir basin deformation problem has gradually gained engineers' attentions. In this paper, based on conventional analytical method, an improved analytical method for high concrete dam is proposed including the effect of reservoir basin deformation. Though establishing FEM models of two different scales covering reservoir basin and near dam area respectively, influence of reservoir basin on dam body is simulated. Then, forward and inverse analyses of concrete dam are separately conducted with conventional and proposed analytical methods. And the influence of reservoir basin deformation on dam working behavior is evaluated. The results of two typical projects demonstrate that reservoir basin deformation will affect dam deformation and stress to a certain extent. And for project with large and centralized water capacity ahead of dam site, the effect is more significant than those with a slim-type reservoir. As a result, influence of reservoir basin should be taken into consideration with conducting analysis of high concrete dam with large storage capacity.

• 한국지반공학회논문집
• /
• 제21권7호
• /
• pp.91-105
• /
• 2005

본 연구에서는 대곡댐의 계측자료에 의한CFRD의 축조에 따른 거동분석을 통하여 댐체가 받는 하중의 변화에 따른 침하 변형 거동을 분석하였으며, 외국의 CFRD 계측 결과와 비교 분석하였다. 대곡댐의 깊이에 따른 침하량 분석 결과, 전체적인 거동양상이 일반적인 CFRD 거동과 잘 일치하는 것으로 평가되었다. 또한, 38개 CFRD의 계측자료 분석 결과 변형계수, 간극비, 형상계수 등은 댐체의 침하 거동을 예측하는데 중요한 인자임을 확인하였으며 최대 층별 침하량이 작을수록 간극비는 낮게 나타났다. 최대 층별 침하량과 댐 높이의 관계에서 0.001에서 0.01사이에 상관계수를 갖는 댐이 26개로서, 일반적인 CFRD는 대략적으로 평균하였을 경우 최대 층별 침하량과 댐 높이는 0.005의 상관계수를 갖는 것으로 나타났다. 간극비가 낮은 경우 변형계수가 높았으며 형상계수는 4 이하로 나타났고 간극비가 높은 경우 상대침하율이 상대적으로 컸으며 형상계수도 4 이상으로 나타났다.

• Geomechanics and Engineering
• /
• 제29권6호
• /
• pp.683-696
• /
• 2022

Dams are inevitably planned to be built on thick overburden with high permeability and deformability. The connection part between concrete cut-off wall in overburden and earth core in dam body is not only a key part of the anti-seepage system, but also a weak position. Large uneven settlement will be aroused at the concoction part. However, the interaction behavior and the scope of the connection part cannot be determined effectively. In this paper, numerical analysis of a high earth core dam built on thick overburden was carried out with large deformation FE method. The mechanical behavior of the connection part was detail studied. It can be drawn that there is little differences in dam integral deformation for different analysis method, but big differences were found at the connection part. The large deformation analysis method can reasonably describe the process that concrete wall penetrates into soil. The high plasticity clay has stronger ability to adapt to large uneven deformation which can reduce stress level, and stress state of concrete wall is also improved. The scope of high plasticity clay zone in the connection part can be determined according to stress level of soils and penetration depth of concrete wall.

• Geomechanics and Engineering
• /
• 제24권5호
• /
• pp.443-456
• /
• 2021

Structural design of the vertical displacements and shear strains in the earth fill (EF) dams has great importance in the structural engineering problems. Moreover, far fault earthquakes have significant seismic effects on seismic damage performance of EF dams like the near fault earthquakes. For this reason, three dimensional (3D) earthquake damage performance of Oroville dam is assessed considering different far-fault ground motions in this study. Oroville Dam was built in United States of America-California and its height is 234.7 m (770 ft.). 3D model of Oroville dam is modelled using FLAC3D software based on finite difference approach. In order to represent interaction condition between discrete surfaces, special interface elements are used between dam body and foundation. Non-reflecting seismic boundary conditions (free field and quiet) are defined to the main surfaces of the dam for the nonlinear seismic analyses. 6 different far-fault ground motions are taken into account for the full reservoir condition of Oroville dam. According to nonlinear seismic analysis results, the effects of far-fault ground motions on the nonlinear seismic settlement and shear strain behaviour of Oroville EF dam are determined and evaluated in detail. It is clearly seen that far-fault earthquakes have very significant seismic effects on the settlement-shear strain behaviour of EF dams and these earthquakes create vital important seismic damages on the swelling behaviour of dam body surface. Moreover, it is proposed that far-fault ground motions should not be ignored while modelling EF dams.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.3.2-27
• /
• 2002

This paper presents the status of dam construction in Korea, along with a brief assessment of the dam design and construction practice. The assessment is based on publically available design and construction records of the major existing rockfill dams which have been constructed since early 1970's, and focussed in identifying geotechnical characteristics of design and construction parameters of the dams. Though the assessment, two representative dams, having unique geotechnical characteristics, are selected for comprehensive comparison of their geotechnical engineering behavior during construction and operation. The comparison yields very interesting findings on the effects of various design and construction parameters on dam behavior.

• 한국지반신소재학회논문집
• /
• 제8권2호
• /
• pp.31-39
• /
• 2009

본 연구에서는 준공 후 정부침하, 콘크리트 슬래브 변형, 누수량 등의 CFRD 거동 예측과 유지 관리 지표로 유용하게 활용될 수 있도록 하기 위해 국내외 27개의 콘크리트 표면차수벽형 석괴댐 (CFRD)의 사례를 분석하였다. 검토결과 Sherard와 Cooke(1987)과 Clements(1984) 등이 제안한 준공 후 정부침하 범위는 록필 재료의 강도가 매우 양호한 경우에는 적합하나, 보통에서 양호한 경우는 과소평가하는 경향이 있는 것으로 나타났다. 누수량 사례분석결과 CFRD에서 누수량의 주원인은 담수하중에 의한 슬래브의 변형이고, 최대 누수량은 주로 최초 담수중에 발생하고, 댐 높이가 125m보다 커지게 되면 누수량이 급증하는 경향이 있는 것으로 나타났다.