• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.956-963
• /
• 2002

A linearly polarized folded type and H-shape slit folded type microstrip patch antenna at GPS(center frequency:1.575 GHz) were designed and fabricated by folding a conventional single $\lambda_{g}/2(\lambda_{g}:wavelength)$ rectangular patch a half along the length direction at the center of patch and inserting ground plane in the middle. As a result, two types of omnidirectional radiation patterns for E-plane (for zx-plane) in the direction of the length of patch and H-plane (for xy-plane) have been acquired. The experimental results show that the average gains of folded type and slit folded type for omnidirectional E-plane and H-plane are -1.5 dBd (-2.4 dBd) and -3.27 dBd(-2.5 dBd). Slit folded type microstrip patch antenna was more miniaturized than folded type microstrip patch antenna by 27.5 %. In case of slit folded type antenna, average gains of omnidirectional radiation pattern for E & H-plane are almost same.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.117-131
• /
• 2007

Representation of building internal space is an active research area as the need for more geometrically accurate and visually realistic increases. 3 dimensional representation is common ground of research for disciplines such as computer graphics, architectural design and engineering and Geographic Information System (GIS). In many cases CAD plans are the starting point of reconstruction of 3D building models. The main objectives of building reconstruction in GIS applications are visualization and spatial analysis. Hence, CAD plans need to be preprocessed and edited to adapt to the data models of GIS SW and then georeferenced to enable spatial analysis. This study automated the preprocessing of CAD data using AutoCAD VBA (Visual Basic Application), and the processed data was topologically restructured for further analysis in GIS environment. Accuracy of georeferencing CAD data was also examined by comparing the results of coordinate transformation by using digital maps and GPS measurements as the sources of ground control points. The reconstructed buildings were then applied to visualization and network modeling.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1822-1829
• /
• 2016

DGPS Reference station is established in Korea for improvement of GPS navigation accuracy and needs of integrity. Recently, DGPS stations provide user positioning information on land as well as ocean. However, this paper investigated visibility and interference environment for performance degradation of Chung-ju DGPS reference station. In case of Young-do reference station, visibility and interference environment were satisfied with reference standard. In case of Chung-ju reference station, visibility was satisfied with 7 degree elevation angle. However, interference environment was not satisfied with reference standard of -50dBm. This paper proposed time differential measurement analysis method excluding error of signal noise for analyzing measurement error. Chung-ju reference station measurement analysis result is three times the error than on Young-do in Dec, 2015. In addition, this paper has confirmed measurement performance degradations because of reference station equipment problem. Future study will be carried out performance analysis of 17 DGPS reference station.

• The KIPS Transactions:PartD
• /
• v.11D no.5
• /
• pp.1167-1176
• /
• 2004

Along the advent of Internet technology, the computing environment has been considerably changed in many application domains. Especially, a lot of researches for e-Logistics have been done for the last 3 years. The e-Logistics means the virtual business activity and service architecture among the logistics companies based on the Internet technology. To construct effectively the e-Logistics framework, researches on the development of the Moving Object Technology(MOT) including GPS and GIS with spatiotemporal databases technique so far has been done The Moving Object Technology stands for the efficient management for the spatiotemporal objects such as vehicles, airplanes, and vessels which change continuously their spatial location along with time flows. However, most systems manage just only the location information detected lately by many reasons so that the uncertainty processing for the past and future location of the moving objects is still very hard. In this paper, we propose the moving object uncertainty model and system design for e-Logistics applications. The MOMS architecture in e-Logistics is suggested and the detailed explain of sub-systems including the uncertainty processor of moving objects is described. We also explain the comprehensive examples of MOMS and uncertainty processing in Delivery Parcel Application that is one of major application of e-Logistics domain.

• The KIPS Transactions:PartD
• /
• v.14D no.7
• /
• pp.707-718
• /
• 2007

Recently, much studies for providing mobile users with suitable and useful content services, LBS(Location Based Service) corresponding to the change of users' location, are actively going on. First and foremost, this is basically owing to the progress of location management technologies such as GPS, mobile communication technology and the spread of personal devices like PDA and the cellular phones. Besides, the research scope of LBS has been changed from vehicle tracking and navigation services to intelligent and personalized services considering the changing information of conditions or environment where the users' are located. For example, it inputs the information such as heavy traffic, pollution, and accidents. The query languages which effectively search the stored vehicle and environment information have been studied depending on the increase of the information utilization. However, most of existing moving object query languages are not enough to provide a recommendation service for a user, because they can not be tested and evaluated in real world and did not consider changed environment information. In order to retrieve not only a vehicle location and environment condition but also use them, we suggest a moving object query language for recommendation service and implement a moving object query process system for supporting a query language. It can process a nearest neighbor query for recommendation service which considers various attributes such as a vehicle's location and direction, environment information. It can be applied to location based service application which utilizes the recommended factors based on environmental conditions.

• Spatial Information Research
• /
• v.16 no.3
• /
• pp.373-383
• /
• 2008

LiDAR, unlike satellite imagery and aerial photographs, which provides irregularly distributed three-dimensional coordinates of ground surface, enables three-dimensional modeling. In this study, urban area was classified based on 3D information collected by LiDAR. Morphological and spatial properties are determined by the ratio of ground and non-ground point that are estimated with the number of ground reflected point data of LiDAR raw data. With this information, the residential and forest area could be classified in terms of height and density of trees. The intensity of the signal is distinguished by a statistical method, Jenk's Natural Break. Vegetative area (high or low density) and non-vegetative area (high or low density) are classified with reflective ratio of ground surface.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.907-916
• /
• 2018

This study presents a methodology that can integrate the information generated by the Busan taxi DTGs and Tachometers. Utilizing the results by the methodology, travel patterns of taxi users were analyzed. Also to verify the reliability of the methodology was conducted by comparing its results with those of O-D information of the National Transportation DB (KTDB). Despite the limited number of samples. the results of this study showed that DTG data, which can reflect changes in status and conditions in real time, can be used as a replacement for KTDB. It is expected that the results generated by the suggested methodology can be useful for developing and executing desirable taxi related policies.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.1
• /
• pp.133-148
• /
• 2016

Voices demanding a revision of the aviation law on the operating drones are continuously rising high with the increase of their applicability in various industry fields. According to the current regulations, drones are permitted to fly under very strict conditions, which include limited places and the line-of-sight visibility from pilots. Because of the strict regulations, it is almost impossible for drones to be used in many industries such as parcel delivery services. To improve the business value of drones, we have to improve the accuracy of drones' positions and provide the proper protection levels in order to detect and avoid any risks including the collisions with the other drones. SBAS(Satellite Based Augmentation System) can support the aviation requirements with the accuracy and integrity so as to reduce the position errors and to calculate the protection levels of drones. In this paper, we assign the flight heights of drones according to the decision heights as per LAAS(Local Area Augmentation System) landing categories and conduct a simulation to predict the SBAS available time of the day.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1549-1556
• /
• 2016

By increased moving speed of aircraft, estimating location of itself becomes more important than ever. This requirement is satisfied by appearance of GPS, however it is useless when signal reception from satellite is not good enough by interruption, for example, traffic jamming. Applying link for communication to additional positioning system is capable of providing relative position of aircraft. Estimating location with link for communication is done without additional equipment but with signal processing based on correlation of received signal. ESPRIT is one of the representative algorithm among them. Estimating correlation matrix is possible to have error since it includes average operation needs enough number of samples not impractical. Therefore we propose algorithm that defines, estimates and removes error matrix of correlation. Proposing algorithm shows better performance than previous one when transmitters are close.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1305-1312
• /
• 2006

This study is about the development of measurement system using ubiquitous wireless communication for river flow monitoring. The system can acquire water depth, quality (temperature, pH, conductivity, turbidity etc.) while a GPS module for getting the location data of measurement points. Also this system is able to acquire the field data via RF connection and can be controlled same time. The acquired data is transmitted to a gateway system from the remote buoy using Zigbee wireless connection. And the gateway system is able to monitor the data through GIS monitoring tool. Finally the data are transmitted to a server computer using CDMA wireless connection by gateway system. The D/B of server computer are constructed automatically and monitored the project web site. The resulting system can be used for scour monitoring, environment monitoring and the other monitoring purposes such as a river flow monitoring system.