• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.1
• /
• pp.49-58
• /
• 2003

This study was conducted to determine the effect of seeding times and mixture rates of oat and forage rape on the growth characteristics and forage yields during rest periods from March to June after the harvest of potatoes in potato cultivation fields located in the areas about 600m above the sea level in Jeju. The experiment was a split plot desist with seeding times(early, middle and late March) sown . at intervals of ten days from early March to late March as the nam plots and mixture rates as subplots, consisted of oat single(150kg/ha), forage rape single(15kg/ha), oat/rape mixtures 75 : 25% (112.5kg/ha of oat and 3.75kg/ha of rape), oat/rape mixtures 50 : 50％(75kg/ha of oat and 7.5kg/ha of rape) and oat/rape mixtures 25 : 75％(37.5kg/ha of oat and 11.3kg/ha of rape). The germination and establishment of eat and rape were not significantly different among seeding times and mixture rates. The plant heights were higher when seeded middle March compared to seeding times of early and late March. The growth stage of the oats seeded early March was dough stage, while that of oats seeded middle or late March was milk stage. The dry matter yields per ha were higher(p<0.05) when seeded middle March than those of seeding time of early and late March. The crude protein contents of rape single, mixtures and oat single treatments were 15.9, 12.4∼14.5 and 8.5％, respectively.

• Journal of Sericultural and Entomological Science
• /
• no.12
• /
• pp.21-36
• /
• 1970

This studies have been carried out to 3nd various causes of cleanness defects on raw silk which has been increased since 1967 in Korea, so that this treatise may be a guide inform action to improve such a defect in future. The cocoon treatment for the proposed work was carried starting with in worst condition to find the critical limit of degrading through such a work. And various analysis have been also worked out using the annual silk testing data past a few years. The results obtained are as follows. 1. There was a great relationship between cleanness and neatness result. 2. Cleanness result is greatly influenced by mounting conditions and handling of cocoons, which brought 40 percent lower as cleanness result than standard ones in which caused minor defects, especially loops and split ends, so the bad mounting conditions and handling of fresh cocoons degraded raw silk from 4A grade to E. 3. The use of good water quality brought the difference of 1.04 percent in cleanness result rather than the use of bad one. 4. Well technical work brought the difference of 0.86 percent in cleanness result rather than poor technical work. 5, Satisfactory cocoon drying installation brought the difference of 1.97 percent in cleanness result rather than insufficient one. 6. Automatic reeling machine marked lower 1,55 percent in cleanness result than multi-end reeling machine. 7. The degrading of cleanness result from 1965 year silk to 1969 year silk marked 1.99 percent, which almost responds to the degrading rate from good to poor cocoon drying installed cleanness results. In view of this result, nowadays, insufficient cocoon drying installation may be main factor to be worse cleanness result of Korean raw silk. 8. The factors of cleanness defect in raw silk once supplied with cocoon into factory are water quality, technique evaluation, cocoon drying capacity and s： reeling machine. The relationship between cleanness result and above factors are as follows. cleanness result＝neatness result＋1.6－1.04(1－a)－1.97(1－b)－0.86(1-c)＋1.55${\times}$d a： The successive we ratio of water quality (0\longrightarrowl) b： The successive ratio of satisfactory cocoon drying installation (0\longrightarrowl) c： The successive ratio of well technical work (0\longrightarrowl) d： 1 in case multi-end reeling machine o in case automatic reeling machine 9, It is not admitted that there is heavy relationship between cleanness occurrence and nonbreaking reel ability. That mal$.$ be sowed with silk reeling technique. 10. The bad mounting conditions caused the worse result on the cocoon quality as much as cleanness. 11. Besides mounting conditions, there may be another factors affecting on the low reel ability of cocoons in Korea.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.425-425
• /
• 2009

그라핀을 금속 촉매를 이용하여 상압 혹은 저진공 CVD로 성장할 경우 대형 기판을 쉽게 얻을 수 있으므로 최근 들어 금속 촉매를 이용한 CVD 기술이 재 각광받고 있다. 최근 MIT의 Jing Kong 그룹, Purdue 대학의 Yong P. Chen 그룹, 국내에서는 성균관대학에서 이에 대한 논문을 발표한 바 있다. CVD 방법의 가장 큰 장점은 그라핀 박막의 가장 큰 문제점 중 하나인 대형 기판에 매우 유리하다는 점이다. 본 연구에서는 결함 없는 대형 그라핀기판을 얻기위해 Si/$SiO_2$/Ni 박막위에 그라핀을 LPCVD로 성장하는 실험을 진행하였다. 우선 시료는 Si위에 $SiO_2$를 Sputtering으로 증착하였고, 그 위에 250nm, 300nm두께의 Ni 박막을 e-beam evaporator로 증착하였다. $0.5-1cm^2$ 크기의 샘플을 Thermal CVD 장비를 이용하여 그라핀을 성장하는 실험을 진행하였다. 성장 압력은 95 torr, 성장온도는 $800^{\circ}C$, $850^{\circ}C$, $900^{\circ}C$에서 Hydrocarbon ($C_2H_2$)을 5min, 10min으로 성장시간을 split하였다. Hydrocarbon을 흘리기 전에 Ni grain을 성장하기 위해 성장온도에서 30~60min정도 $H_2$분위기에서 Ni 산화막의 환원 및 어닐링을 진행하였다. 그림.1은 $850^{\circ}C$, 5분간 성장한 그라핀/Ni 샘플의 광학사진이다. 그림.2는 $850^{\circ}C$에서 5min, 10min 성장한 샘플의 Raman spectrum이다. (파장은 514.532nm). 850C 10min 샘플은 G>G' peak 이지만, 5min으로 성장한 샘플의 경우 G'>G peak 임을 알 수 있고, 따라서 5min의 조건에서는 층 두께가 4층 미만의 그라핀 박막을 얻을 수 있음을 보여준다. 또한 G' peak의 위치가 두께가 감소할수록 내려감을 확인할 수 있다. 다만 D peak가 실험한 대부분의 샘플에서 보여서 아직 성장한 그라핀의 결합이 많은 것으로 보인다. 이러한 이유는 성장온도가 낮은 것이 일차 원인으로 생각되며 박막의 균일도 향상과 결함을 줄이기 위한 추가적인 개선 실험을 진행 중이다.

• Applied Biological Chemistry
• /
• v.32 no.4
• /
• pp.350-356
• /
• 1989

The determinabilities of several lignan compounds by capillary-GC (F1D) were studied. The lignan compounds used were deoxyschizandrin, gomisin N, schizandrin, wuweizisu C, gomisin A, angeloylgomisin H and tigloylgomisin H which were isolated from fruits of Schisandra chinensis BAILLON and identified with GC/MS(EI, 70eV), 1H-NMR(300MHz) and IR. The GC column used was SPB-1 fused silica capillary$(0.25mm\;ID{\times}30m,\;Supelco)$, and the column oven temperature was programmed from $200^{\circ}C$ to $300^{\circ}C$ at the rate of $4^{\circ}C$ per minute. The linearities between concentration and FID response were maintained in $2{\sim}500ppm$ of deoxyschizandrin and wuweizisu C and in $5{\sim}500ppm$ of gomisin N, schizandrin, gomisin A, angeloylgomisin H and tigloylgomisin H. The contents of lignan compounds in fruits of S. chinensis BAILLON produced at Moo-ju area were analyzed by the GC method: the values obtained of schizandrin and gomisin N were 6.5 and 5.9mg/g respectively, and those of gomisin A, wuweizisu C, angeloylgomisin H, deoxyschizandrin and tigloylgomisin H were $0.5{\sim}1.6mg/g$.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.1
• /
• pp.30-37
• /
• 2006

Black rockfish and goldeye rockfish are commercially important fish species due to the increasing demand in Korea. When estimating the abundance of stocks for these species acoustically, it is of crucial importance to know the target strength(TS) to length dependence. In relation to these needs, TS measurement was conducted on black rockfish and goldeye rockfish in an acrylic salt water tank using 70kHz and 120kHz split beam echo sounders. The TS for these two species under the controlled condition was simultaneously measured with the swimming movement by DVR system and analyzed as a function of fish length(L). The results obtained are summarized as follows: The best fit regression of TS on fish length of black rockfish was TS=19.38 Log(L, cm)-70.46 ($r^2=0.71$) at 70kHz and TS=22.39 Log(L, cm)-70.40 ($r^2=0.64$) at 120kHz and in the standard form TS=20 Log(L, cm)-71.29 ($r^2 = 0.70$) at 70kHz and TS=20 Log(L, cm)-66.88 ($r^2=0.57$) at 120kHz. The best fit regression of TS on fish length of goldeye rockfish was TS=17.10 Log(L, cm)-68.28 ($r^2=0.37$) at 70kHz and TS=24.39 Log(L, cm)-73.74 ($r^2=0.59$) at 120kHz and in the standard form TS=20 Log(L, cm)-72.03 ($r^2=0.32$) at 70kHz and TS=20 Log(L, cm)-67.68 ($r^2=0.64$) at 120kHz. An empirical model for fish TS(dB) averaged over the dorsal aspect of 115 fishes of black rockfish and goldeye rockfish and which spans the fish length(L, m) to wavelength($\lambda$, m) ratio between 8 and 30 was derived : TS=34.12 Log(L)-14.12 Log($\lambda$)-23.83, ($r^2=0.90$).

• Analytical Science and Technology
• /
• v.26 no.1
• /
• pp.34-41
• /
• 2013

Split-flow thin cell (SPLITT) fractionation (SF) is a rapid separation technique capable of separating colloidal particles or macromolecules into two or more fractions. SF allows fractionations in a preparative scale as sample is fed continuously. Generally SF uses a thin ribbon-like channel equipped with two flow stream splitters at the inlet and outlet of the channel. Thus there exist two flow inlets and two flow outlets at the top and bottom of the inlet and outlet of the channel, respectively. There are two operating modes in SF, conventional mode and full-feed mode (FFD). Although the resolution in the FFD mode is lower than that in the conventional mode, FFD mode has some merits. The design of the channel and operation are simpler in the FFD mode, as it does not require the feeding of the solvent. Thus there is no flow stream splitter at the channel inlet, and only one pump is needed, unlike the conventional mode, where two pumps are required for the feedings of the sample and the solvent separately. Also the sample is not diluted in the FFD mode as there is no solvent feeding, which is important for fractionation samples with low colloidal concentrations such as environmental samples. For some of environmental samples, pre-concentration is often required. In this study, a new large-scale splitter-less FFD-SF channel was implemented, where there is no splitter at the outlet as well as at the inlet of the channel. It was possible to build the channel in a much larger dimension than conventional ones, allowing much higher sample throughput (TP). The new channel was tested and optimized with polyurethane (PU) latex beads, and then applied to large-scale separation of Polyacrylate (PA).

• Cartoon and Animation Studies
• /
• s.42
• /
• pp.241-262
• /
• 2016

British TV Channel 4 is one of the famous TV Channel in the world. Its station ID has also played a leading role in the developments of Motion Graphics including station IDs. This station ID's main visual design concept is its name and an iconic logo '4' at the same time. The first channel 4 station ID was designed by using modular typography to construct the iconic '4'. Modular typography is a technique of creating letters with similar elements. Channel 4's station ID was constructed from coloured polygons. The polygons split and converge at the same point in 3D space. Modularity in Channel 4's station ID is evidenced by the similar units of polygons. After the first station ID, Channel 4 was re-branded. Eventhough the station IDs which followed did not use coloured and geometrical polygons, modularity is seen in most of the station IDs especially between 2004 - 2011. In these station IDs, the iconic '4' is formed from similar natural and environmental objects like rocks, buildings, lights etc. In this analysis paper, there is a visual narrative on the history of Channel 4, the concept of modular typography in the original station ID and the application of modular typography in other Channel 4's station IDs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.4
• /
• pp.579-587
• /
• 2013

A total of 288 crossbred (Duroc${\times}$Landrace${\times}$Yorkshire) growing pigs were used in two experiments to investigate the effects of adding ${\beta}$-mannanase to corn-soybean meal-based diets on pig performance and apparent total tract digestibility (ATTD). Both experiments lasted 28 d and were split into two phases namely 1 to 14 days (phase 1) and 15 to 28 days (phase 2). In Exp. 1,144 pigs weighing $23.60{\pm}1.59$ kg BW were assigned to one of four corn-soybean meal-based diets containing 0, 200, 400 or 600 U/kg ${\beta}$-mannanase. Increasing the level of ${\beta}$-mannanase increased weight gain (quadratic effect; p<0.01) and feed efficiency (linear and quadratic effect; p<0.01) during the second phase and the overall experiment. However, performance was unaffected (p>0.05) by treatment during phase 1. Increasing the amount of ${\beta}$-mannanase in the diet improved (linear and quadratic effect; p<0.05) the ATTD of CP, NDF, ADF, calcium, and phosphorus during both phases. Based on the results of Exp. 1, the optimal supplementation level was determined to be 400 U/kg and this was the level that was applied in Exp. 2. In Exp. 2, 144 pigs weighing $23.50{\pm}1.86$ kg BW were fed diets containing 0 or 400 U/kg of ${\beta}$-mannanase and 3,250 or 3,400 kcal/kg digestible energy (DE) in a $2{\times}2$ factorial design. ${\beta}$-Mannanase supplementation increased (p<0.01) weight gain and feed efficiency while the higher energy content increased (p<0.01) feed intake and feed efficiency during both phases and overall. Increased energy content and ${\beta}$-mannanase supplementation both increased (p<0.05) the ATTD of DM, CP, NDF, ADF, phosphorus, and GE during both phases. There were no significant interactions between energy level and ${\beta}$-mannanase for any performance or digestibility parameter. In conclusion, the ${\beta}$-mannanase used in the present experiment improved the performance of growing pigs fed diets based on corn and soybean. The mechanism through which the improvements were obtained appears to be related to improvements in ATTD.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.9
• /
• pp.1233-1237
• /
• 2001

A study was conducted to determine the effects of maturity at harvest and wilting days on the quality of round baled rye (Secale cereale L.) silage. This study was a $3{\times}3$ factorial arrangement in a split plot design with 3 replicates. The main plot was 3 harvesting dates at the stage of boot (20 Apr.), heading (29 Apr.) and flowering (14 May). The subplot was wilting day : 0 (unwilted), 0.5 and 1 day (0, 1, and 2 days at boot stage). Acid detergent fiber (ADF) and neutral detergent fiber (NDF) contents of rye silage were significantly greater than those of rye before ensiling, but crude protein (CP) content and in vitro dry matter digestibility (IVDMD) were vice versa. Buffering capacity (BC) of rye harvested at flowering stage was decreased from 264 to 202 meq/kg at 1 day wilting, however, it was increased when harvested at boot or heading stage. The pH in wilted silage was the highest while that of flowering stage was the lowest. Water soluble carbohydrate (WSC) content of wilting rye was lower than that of unwilted, and the lowest at late harvesting stage. All plots had minimal WSC content for silage fermentation. Wilting treatment and delayed harvesting date caused an increase in dry matter (DM) content of round bale silage. The content of ammonia-N expressed as a portion of total N showed negative correlation with DM content. High quality silage according to ammonia-N content could be obtained from mid-harvest with wilting. There were highly significant differences in each organic acid between harvesting dates and wilting periods. Acetic and butyric acid contents were increased with delayed harvesting and prolonged wilting period, the lactic acid content, however, was decreased. This study demonstrated that harvest of rye from heading to flowering stage with wilting would be a recommendable method for making high quality rye silage using round bale system.

• Journal of the Korean Vacuum Society
• /
• v.2 no.2
• /
• pp.227-235
• /
• 1993

$SbS_{1-x}Se_xI,\;BiS_{1-x}Se_xI,\;Sb_{1-x}Bi_xSI,\;Sb_{1-x}Bi_xSeI,\;SbS_{1-x}Se_xI:Co,\;BiS_{1-x}Se_xI:Co,\;Sb_{1-x}Bi_xSI:Co$, and $Sb_{1-x}Bi_xSeI:Co$ single crystals were grown by the vertical Bridgman method using the ingots. It has been found that these single crystals have an orthorhombic structure and indirect optical transition. The composition dependences of energy gaps are given by $E_g(x)=E_g(0)-Ax+Bx^2$. The impurity optical absorption peaks due to cobalt deped with impurity are attributed to the electron transitions between the split energy levels of $Co^{2+}$ and $Co^{3+}$ ions sited at $T_d$symmetry of the host lattice.