• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2014-2016
• /
• 2004

In order to obtain a low-loss ferroelectric phase shifter, the reflection-type phase shifter with ferroelectric defected ground structure (DGS) resonators has been designed in this paper. The proposed phase shifter is consist of a 3-dB $90^{\circ}$ branch-line hybrid coupler and terminated reflective circuit with tunable ferroelectric DGS resonator. The ferroelectric DGS unit structure can provide high Q resonator characteristic at high frequencies. The design parameters of equivalent circuit for the tunable DGS resonator are derived by using simple circuit analysis method and three-dimensional full wave finite element method. The fabricated phase shifter has an insertion loss of better than 3.4dB at 13.5GHz.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1773-1780
• /
• 2016

This paper proposes a wide air-gap control method for the multi-module permanent magnet linear synchronous motor (MM-PMLSM) based on independent vector control. In particular, the MM-PMLSM consists of symmetrical multi-module and multi-phase structures, which are basically three-phase configurations without a neutral point, unlike conventional three-phase machines. In addition, there are no additional magnetic levitation windings to control the normal force of the air-gap between each stator and mover. Hence, in this paper, a dq-axis current control applying a d-q transformation and an independent vector control are proposed for the air-gap control between the two symmetric stators and mover of the MM-PMLSM. The characteristics and control performance of the MM-PMLSM are analyzed under the concept of vector control. As a result, the proposed method is easily implemented without additional windings to control the air-gap and the mover position. The effectiveness of the proposed independent vector control algorithm is verified through experimental results.

• Applied Science and Convergence Technology
• /
• 제24권6호
• /
• pp.250-253
• /
• 2015

High contrast grating (HCG) is the structure made up of the sub-wavelength grating of high-index and the surrounding layer of low-index, which reveals high contrast between two materials. Its advantages include high reflectivity over a broad bandwidth, polarization and wavelength selectivity, optical high-Q resonator, and phase modulation. In this work, the HCG structure comprising of indium tin oxide (ITO) and Silicon (Si), for the surrounding layer and the grating layer respectively, was studied. Its theoretical model was established, and transmittance, phase and optical behavior were calculated by rigorous coupled-wave analysis and finite element method. Furthermore, the established structure was fabricated to validate its feasibility. The fabricated structure shows the focusing capability whose length is about $10{\mu}m$, and the feasibility of the structure was demonstrated. It is also meaningful that ITO layer can contribute to the fabrication of the HCG structure, leading to enable the structure to be electrical-driven.

• Current Optics and Photonics
• /
• 제1권1호
• /
• pp.65-72
• /
• 2017

We propose a nearly lossless, compact, electrically modulated vertical directional coupler, which is based on the controllable evanescent coupling in a previously proposed graphene-assisted total internal reflection (GA-FTIR) scheme. In the proposed device, two single-mode waveguides are separate by graphene-$SiO_2$-graphene layers. By changing the chemical potential of the graphene layers with a gate voltage, the coupling strength between the waveguides, and hence the coupling length of the directional coupler, is controlled. Therefore, for a properly chosen, fixed device length, when an input wave is launched into one of the waveguides, the ratio of their output powers can be controlled electrically. The operation of the proposed device is analyzed, with the dispersion relations calculated using a model of a one-dimensional slab waveguide. The supermodes in the coupled waveguide are calculated using the finite-element method to estimate the coupling length, realistic devices are designed, and their performance was confirmed using the finite-difference time-domain method. The designed $3{\mu}m$ by $1{\mu}m$ device achieves an insertion loss of less than 0.11 dB, and a 24-dB extinction ratio between bar and cross states. The proposed low-loss device could enable integrated modulation of a strong optical signal, without thermal buildup.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권6호
• /
• pp.550-555
• /
• 2011

Chromosomal loss of heterozygosity (LOH) is a common mechanism for the inactivation of tumor suppressor genes in human epithelial cancers. LOH patterns can be generated through allelotyping using polymorphic microsatellite markers; however, owing to the limited number of available microsatellite markers and the requirement for large amounts of DNA, only a modest number of microsatellite markers can be screened. Hybridization to single nucleotide polymorphism (SNP) arrays using Affymetarix GeneChip Mapping 10 K 2.0 Array is an efficient method to detect genome-wide cancer LOH. We determined the presence of LOH in oral SCCs using these arrays. DNA was extracted from tissue samples obtained from 10 patients with tongue SCCs who presented at the Hospital of Tokyo Dental College. We examined the presence of LOH in 3 of the 10 patients using these arrays. At the locus that had LOH, we examined the presence of LOH using microsatellite markers. LOH analysis using Affymetarix GeneChip Mapping 10K Array showed LOH in all patients at the 1q31.1. The LOH regions were detected and demarcated by the copy number 1 with the series of three SNP probes. LOH analysis of 1q31.1 using microsatellite markers (D1S1189, D1S2151, D1S2595) showed LOH in all 10 patients (100). Our data may suggest that a putative tumor suppressor gene is located at the 1q31.1 region. Inactivation of such a gene may play a role in tongue tumorigenesis.

• 대한전자공학회논문지TC
• /
• 제38권7호
• /
• pp.14-21
• /
• 2001

본 논문에서는 유전체가 삽입된 공진기를 이용하여 C-band용 대역통과 여파기를 설계, 제작하였다. 공진기의 높이는 인접 유전체 공진기의 도파관 차단 주파수로부터 결정된다. 공진기의 지름은 도체 손실을 고려하여 유전체의 두 배로 결정하였다. 유전체 공진기의 공진주파수는 비소멸(non-decaying) 모드 해석법으로 계산하였다. 일반적으로 원통형 유전체 공진기의 공진주파수는 Cohn 모델로 해석하였는데, 이것은 공진기의 벽과 유전체벽 사이에서 전자파가 소멸(decaying)된다는 가정 하에 해석한 방법이다. 그러나， 이 방법은 근사적인 해석방법이다. 외부양호도(external quality factor)인 $Q_{ex}$는 Ansoft의 Maxwell 시뮬레이션 툴을 사용하여 결정하였다. 유전율 45인 유전체를 사용하여 설계한 대역통과 여파기는 5.065GHz의 중심주파수를 가졌다. 삽입손실은 1dB, 밴드 폭은 20MHz, 감쇠 특성은 30dB$(f_0{\pm}15MHz)$)로 설계목표에 만족함을 알 수 있다.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1994년도 춘계학술대회 and 제3회 신약개발 연구발표회
• /
• pp.267-267
• /
• 1994

In order to obtain insight into the mechanism by which DNA containing a thymine photo-dimer is recognized by the excision repair enzyme, T$_4$ endonuclease V, we have taken NMR study of this protein and its complex with oligonucleotides. The conformations of five different DNA duplexes DNA I : d(GCGGATGGCG).d(CGCCTACCGC), DNA II d(GCGGTTGGCG) .d(CGCCAACCGC), DNA III : d(GCGGT ^ TGGCG) .d(CGCCAACCGC), DNA IV d(GCGGGCGGCG).d(CGCCCGCCGC) and DNA V d(GCGGCCGGCG) . d(CGCCGGCCGC) were studied by $^1$H NMR. The NMR spectra of these five DNA duplexes in the absence of the enzyme clearly show that the formation of a thymine dimer within the DNA induces only a minor distortion in the structure, and that the overall structure of B type DNA is retained. The photo-dimer formation is found to cause a large change in chemical shifts at the GC7 base pair, which is located at the 3'-side of the thymine dimer, accompanied by the major conformational change at the thymine dimer site. The binding of a mutant T$_4$ endonuclease V (E23Q), which is unable to digest DNA containing a thymine dimer, to the DNA duplex d(GCGGT ^ TGGCG)ㆍd(CGCCAACCGC) causes a large down-field shift in the imino proton resonance of GC7. Therefore, this position is thought to be either the crucial point of the interaction wi th T$_4$ endonuclease V, or the si to of a conformational change in the DNA caused by the binding of T$_4$ endonuclease V. Usually, it is very difficult to assign NMR peaks in DNA * protein complex because of severe peak overlaps. In order to overcome these peak overlaps, we used a method of deuterium incorporation.

• 한국재료학회지
• /
• 제2권6호
• /
• pp.452-460
• /
• 1992

공냉에 의한 중탄소 비조질강과 직접 소입 방법에 의한 저탄소 비조질강의 강도와 인성에 대하여 미량 첨가 원소와 온도 및 냉각 속도의 영향을 조사하였다. 공냉에 의한 중탄소 비조질강은 페라이트-펄라이트 조직으로 V+Nb 복합첨가로 강도와 인성의 조합을 이룰 수 있었으며 연구 결과 최적 조합은 0.40C+0.12V+0.07Nb에 의한 인장 강도 831MPa, 충격 52.1J이었다. 직접 소입 방법에 의한 저탄소 비조질강은 마르텐사이트 조직으로 Mo에 의한 강도와 인성의 조합을 이를 수 있었으며 가장 양호한 조합은 0.12C+0.10V+0.03Nb+1.13Mo에 의한 인장강도 855MPa, 충격인성 108J로써 중탄소 비조질강에 비해 충격 인성이 2배 정도 향상되었다. 가열온도 110$0^{\circ}C$가 120$0^{\circ}C$에 비해 더 양호한 강도 및 충격 인성을 나타내었고, 냉각속도는 1.$2^{\circ}C$/s가 가장 양호한 결과를 나타내었다. 또한 합금원소와 온도 및 냉각속도가 강도, 충격인성, 오스테나이트 결정립 크기 그리고 펄라이트 층간거리에 미치는 영향을 중회귀분석하여 계량화하였다.

• 전력전자학회논문지
• /
• 제4권4호
• /
• pp.357-367
• /
• 1999

매입형 영구자석 동기전동기와 인버터, 그리고 추진제어기로 구성된 추진시스템을 갖는 독립 구동형 전기자동차에 대하여 파라미터 변동특성을 반영하는 전동기 제어기법과 주행특성을 개선한 새로운 추진제어기 기법을 제시하였다. 기존의 방식과는 다르게 전동기의 등가파라미터인{{{{ { L}_{d } }} 와{{{{ { L}_{q } }} 의 변동을 전류의 크기뿐만 아니라 전류 위상각의 관점에서 고려하였으며, 해석적인 방법으로 전 영역에 대한 변동 곡선을 제시하였다. 그리고{{{{ { L}_{d } }}와 {{{{ { L}_{q } }}에 대한 변동을 신경회로망을 이용하여 추정기를 구성한 후 신경회로망 추정기를 갖는 매입형 영구자석 동기 전동기용 벡터제어 기법을 제시하였다. 또한, 추진제어기는 토크분배 기능과 토크약화제어 기능을 구비하도록 만들어졌으며, 선회 조종성과 슬립율이 안정 영역 내에서 운전 되도록 개선된 추진 제어기를 제시하였다. 제안된 제어기의 동특성을 실험과 모의 실험을 통하여 검증하였다.

• 전력전자학회논문지
• /
• 제7권2호
• /
• pp.205-213
• /
• 2002

본 논문에서는 직류모선에서 교류모선으로 회생되는 전력을 제어할 수 있는 3상 전압원 인버터 시스템을 구현하였다. 전체 시스템은 선간접압 및 선전류용 센서, d-q 변환방식을 사용한 실제전력 연산기. PI제어기법을 적용한 복소전력 제어기, 수정 ｑ도통방식을 구현하기 위한 게이팅신호 생성기, 주파수를 추종하기 위한 DPLL과 전력회로로 구성된다. 제어보드는 32비트 DSP인 TMS32C32, EFLD 2개, ACD 6개와 DAC로 구성하였다. 제안한 시스템의 성능을 검증하기 위해 교류 220V에서 5kVA 전력용량인 축소모델을 설계, 제작하였다. 실험결과, 회생 유효전력은 명령값으로 잘 제어되며 회생 무효전력은 운전동안 내내 거의 0의 값을 유지함을 확인하였다.