• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.436-439
• /
• 2007

This paper describes the optimization of PGS(Patterned Ground Shield) of 5.5 turns rectangular spiral inductor using Taguchi's method. PGS is decrease method of parasite component by silicon substrate among dielectric loss reduction method. By using the taguchi's method, each parameter is fixed upon that PGS high poison(A), slot spacing(B), strip width(C) and overlap turn number(D) of PGS design parameter. Then we verified that percentage contribution and design sensitivity analysis of each parameter and level by signal to noise ratio of larger-the-better type. We consider percentage contribution and design sensitivity of each parameter and level, and then verify that model of optimization for PGS is lower inductance decreasing ratio and higher Q-factor increasing ratio by EM simulation.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.4
• /
• pp.816-824
• /
• 2017

Human noroviruses are widespread and contagious viruses causing nonbacterial gastroenteritis. Real-time reverse transcription quantitative PCR (real-time RT-qPCR) is currently the gold standard for the sensitive and accurate detection of these pathogens and serves as a critical tool in outbreak prevention and control. Different surveillance teams, however, may use different assays, and variability in specimen conditions may lead to disagreement in results. Furthermore, the norovirus genome is highly variable and continuously evolving. These issues necessitate the re-examination of the real-time RT-qPCR's robustness in the context of accurate detection as well as the investigation of practical strategies to enhance assay performance. Four widely referenced real-time RT-qPCR assays (Assays A-D) were simultaneously performed to evaluate characteristics such as PCR efficiency, detection limit, and sensitivity and specificity with RT-PCR, and to assess the most accurate method for detecting norovirus genogroups I and II. Overall, Assay D was evaluated to be the most precise and accurate assay in this study. A ZEN internal quencher, which decreases nonspecific fluorescence during the PCR, was added to Assay D's probe, which further improved the assay performance. This study compared several detection assays for noroviruses, and an improvement strategy based on such comparisons provided useful characterizations of a highly optimized real-time RT-qPCR assay for norovirus detection.

• Journal of Navigation and Port Research
• /
• v.43 no.3
• /
• pp.186-196
• /
• 2019

Berthing energy is majorly influenced by the berthing velocity. It is necessary to design an appropriate berthing velocity for each pier, since excessive berthing velocity can cause berthing accident causing damage to the ship and pier. In this study, as a statistical approach for berthing velocity, the probability distributions suitable for the berthing velocities were confirmed using the K-S test, the A-D test and the Q-Q plot. As a result, the frequency distribution of the berthing velocity was found to be suitable using the Weibull distribution as well as the lognormal distribution. Additionally, the predicted values obtained through estimation of the berthing velocity using the concept of probability of exceedance in this study is proposed as a reference of design berthing velocity. It can be observed that the design berthing velocity is set to be somewhat low so that it does not practically match with the reality. This study and its results can be expected to contribute to the development of a proper design velocity calculation method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.3
• /
• pp.296-301
• /
• 2005

This paper proposing the use of the Instantaneous reactive power method as a harmonic detection method for a single phase active filter system. This method is to detect harmonic components through d-q frame approach. The conventional use of d-q frame approach for a 3-phase system Is extended to the single phase system. The proposed system uses a multi-level inverter for harmonic compensation and the inverter is connected to the input side without using transformers. The proposed algorithm is verified by simulation and experiment.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.11a
• /
• pp.45-48
• /
• 2000

본 논문은 현재 고성능 가역압축 부호화의 표준이 되는 JPEG-LS의 예측오차에 대한 확률분포를 결정하는 컨텍스트 모델링(context modelling)에서 컨텍스트 정수의 결정 방법에 관해 기술한다. 먼저, 압축률 향상을 위해 낮은 대비(low contrast)를 적용하는 전처리 과정을 도입한다. 둘째로, 낮은 복잡도(low complexity)를 위해 주목화소와 주변화소 사이의 차분을 양자화하고, 그 값 Q$_1$,Q$_2$, Q$_3$로부터 컨텍스트 정수(Q)의 결정을 위해 우선 순위를 정한 후, 3차원 가상좌표 위로의 할당을 고려한다. 또한, 제안 방법과 JPEG-LS의 near-lossless부분을 비교하여, 다양한 영상에 대하여 적용시켜 본 결과, 제안한 방법의 압축률과 손실이득이 훨씬 좋음을 보인다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.3
• /
• pp.289-295
• /
• 2013

It is important to know exact values of Interior Permanent Magnet Synchronous Motors(IPMSM)' parameters such as stator resistance and inductance in order to have their high performance. This paper proposes a novel motor parameter(stator resistance, d&q axis inductance) estimation algorithm for IPMSM. The proposed estimation method utilizes back-EMF equations and model reference adaptive system(MRAS). The algorithm using back-EMF estimates d and q axis inductances in the constant torque region, and the stator resistance is estimated by using MRAS with the estimated inductance regardless of speed regions. The validity of the proposed algorithm is verified by simulations and experiments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.4
• /
• pp.333-341
• /
• 2013

In this paper, a feedback linearization control is proposed to regulate the output voltages of a three-phase four-wire inverter under the unbalanced and nonlinear load conditions. First, the nonlinear model of system including the output LC filters is derived in the d-q-0 synchronous reference frame. Then, the system is linearized by the multi-input multi-output feedback linearization. The tracking controllers for d-q-0-components of three-phase line-to-neutral load voltages are designed by linear control theory. The experimental results have shown that the proposed control method gives the good performance in response to the load conditions.

• Journal of applied mathematics & informatics
• /
• v.26 no.3_4
• /
• pp.471-479
• /
• 2008

Let $R\;{\in}\;C^{m{\times}m}$ and $S\;{\in}\;C^{n{\times}n}$ be nontrivial unitary involutions, i.e., $R^*\;=\;R\;=\;R^{-1}\;{\neq}\;I_m$ and $S^*\;=\;S\;=\;S^{-1}\;{\neq}\;I_m$. We say that $G\;{\in}\;C^{m{\times}n}$ is a generalized reflexive matrix if RGS = G. The set of all m ${\times}$ n generalized reflexive matrices is denoted by $GRC^{m{\times}n}$. In this paper, an efficient method for the least squares solution $X\;{\in}\;GRC^{m{\times}n}$ of the matrix equation AXB = D with arbitrary coefficient matrices $A\;{\in}\;C^{p{\times}m}$, $B\;{\in}\;C^{n{\times}q}$and the right-hand side $D\;{\in}\;C^{p{\times}q}$ is developed based on the canonical correlation decomposition(CCD) and, an explicit formula for the general solution is presented.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.159-165
• /
• 1998

In bitrate control of MPEG-2 TM5, $Q_{j}$, N-act, and mquant, of present macroblock are predicted from those of previous macroblock. It results in poor image quality because of abrups change of them. We proposed a method predicting $Q_{j}$, N-act, and mquant, of present macroblock by averaging those parameters of adjacent previous macroblocks. As a results, it shows improved PSNR compared to bitrate control of MPEG-2 TM5.TM5.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.326-331
• /
• 2019

In the real world, there are both dynamic objects and static objects, but an autonomous vehicle or mobile robot cannot distinguish between them, even though a human can distinguish them easily. It is important to distinguish static objects from dynamic objects clearly to perform autonomous driving successfully and stably for an autonomous vehicle or mobile robot. To do this, various sensor systems can be used, like cameras and LiDAR. Stereo camera images are used often for autonomous driving. The stereo camera images can be used in object recognition areas like object segmentation, classification, and tracking, as well as navigation areas like 3D world reconstruction. This study suggests a method to distinguish static/dynamic objects using stereo vision for an online autonomous vehicle and mobile robot. The method was applied to a 3D world map reconstructed from stereo vision for navigation and had 99.81% accuracy.