• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2005년도 추계학술발표회 논문집
• /
• pp.226-232
• /
• 2005

• 대한기계학회논문집
• /
• 제13권6호
• /
• pp.1292-1300
• /
• 1989

본 연구에서는 비원형관의 평판길이의 변화가 평판과 원관사이의 상호작용 으로 나타나는 온도장, 유동장, 국소 Nusselt 수 및 평균 Nusselt 수에 미치는 영향 에 대하여 고찰하였다.

• 대한기계학회논문집
• /
• 제8권4호
• /
• pp.351-359
• /
• 1984

본 연구에서는 열전달계수의 이와같은 변수의 영향에 대하여 연구하였다. 그리고 이론적 연구가 수행되지 않는 기하학적 형태에 대한 열전달 계수의 Rayleigh수 와 간격비 및 Prandtl수에 관한 간단한 상관관계식을 제시하였다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제18권2호
• /
• pp.107-127
• /
• 2014

The goal of this note is to describe the asymptotic behaviour of problems set in cylinders when the size of them is becoming infinite. This leads to consider problems in unbounded domains as well as new singular perturbations issues.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.369-374
• /
• 2012

Based on the structure feature of a tree, a cylindrical $Ti_2AlC$/graphite layered composite has been fabricated through heat treating a graphite column and six close-matched thin wall $Ti_2AlC$ cylinders bonded with the $Ti_2AlC$ powders at $1300^{\circ}C$ and low oxygen partial pressure. SEM examination reveals that the bond interlayers between cylinders or that between cylinder and column are not fully dense without any crack formation. During the compressive test, the strain of the $Ti_2AlC$/graphite layered composite is about twice higher than that of the monolithic $Ti_2AlC$ ceramic, and the compressive strength of the layered composite is 348 MPa. The layered composite show the noncatastrophic fracture behaviors due to the debonding and shelling off of the layers, which are different from the monolithic $Ti_2AlC$ ceramic. The mechanism of the improved deformation capacity and noncatastrophic failure modes are attributed to the presence of the central soft graphite column and cracks deflection by the bond interlayers.

• Wind and Structures
• /
• 제6권2호
• /
• pp.127-140
• /
• 2003

An investigation into the effect of corner cuts on the Strouhal number of rectangular cylinders with various dimensional ratios and various angles of attack is described. The Strouhal number given as a function of corner cut size is obtained directly from the aerodynamic behavior of the body in a uniform flow through a series of wind-induced vibration tests. For a quick verification of the validity of the Strouhal numbers obtained in this way, they are compared with the approximated the Strouhal numbers based on Shiraishi's early research. The test results show that the Strouhal number of the model with various corner cuts has a fluctuating trend as the angle of attack changes. For each cutting ratio as the angle of attack increases at each cutting ratio above $15^{\circ}$, the Strouhal number decreases gradually, and these trends are more evident for larger corner cut sizes. However, a certain corner cut size which is effective in reducing the wind-induced vibration can be identified by larger Strouhal numbers than those of other corner cut sizes. Three distinct characteristics of Strouhal number variation can be identified in three regions which are termed as Region I, II, and III based on the general trend of the test results. It is also found that the corner cut is effective in one region (Region-II) and less effective in another one (Region-III) when only the vortex-induced vibration occurs.

• Composites Research
• /
• 제26권4호
• /
• pp.235-244
• /
• 2013

체적 적분방정식법이라는 새로운 수치해석 방법을 이용하여, 다수의 임의로 경사진 등방성 타원형 장섬유를 포함하는 등방성 무한고체가 정적 인장하중을 받을 때 무한고체 내부에 발생하는 응력분포 해석을 수행하였다. 장섬유들과 기지 사이의 경계면은 완전결합이라고 가정하여, 평면 변형률 해석을 수행하였다. 즉, 등방성 기지에 다수의 임의로 경사진 등방성 타원형 장섬유의 중심이 1) 정사각형 배열 형태 또는 2) 정육각형 배열 형태로 포함되어 있는 경우에, 다양한 타원형 장섬유의 체적비와 다양한 경사각에 대하여, 중앙에 위치한 등방성 타원형 장섬유와 등방성 기지의 경계면에서의 인장응력 분포의 변화를 구체적으로 조사하였다. 또한, 체적 적분방정식법을 이용한 해를 해석하고, 유한요소법을 이용한 해와 비교해 봄으로서, 체적 적분방정식법을 이용하여 구한 해의 정확도를 검증하였다.

• 한국전산구조공학회논문집
• /
• 제19권3호
• /
• pp.259-269
• /
• 2006

원환균열과 원주균열을 지닌 축대칭 선형 점탄성 중실축과 중공축이 외력을 받을 때 파괴역학 변수로서 응력확대계수, 에너지방출률 그리고 균열개구변위의 수치해를 유한요소해법을 이용하여 구한다. 균열선단에서는 응력의 특이성을 지닌 1/4절점 삼각형 특이요소가 사용된다. 또한 수치해를 비교 검증하기 위해 탄성-점탄성 상응원리를 이용하여 선형파괴역학의 탄성해들로부터 점탄성 이론해가 유도 제시된다. 해석에 사용되는 점탄성 물성은 체적변형은 탄성적이고 전단변형은 표준선형고체처럼 거동한다고 가정한다. 제시된 수치해법과 이론해는 축대칭 점탄성 거동 연구에 중요한 자료가 된다.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.16-28
• /
• 2000

The steady rotating flows in eccentric annulus has been studied by a numerical method based on the spectral collocation method. The inner cylinder has a constant angular velocity while the outer on e is stationary. Flow between eccentric cylinders is of considerable technical importance as it occurs in journal bearings. In the present work, the governing equations for laminar flow are expressed as Navier-Stokes equations, including the non-linear convection terms. The solutions were utilized i, estimate the effects of the nonlinear terms on the load acting on the rotating cylinder. Based on the half and the full Sommerfeld methods, the load on the rotating cylinder is evaluated with eccentricity, by integrating the pressure and skin friction around the cylinder. The attitude angle and Sommerfeld reciprocal are calculated from the load. Also, the torque on the rotating inner cylinder was calculated. considering the skin friction. The attitude angle and Sommerfeld reciprocal are decreased with eccentricity. Viscous damping coefficient due to the skin friction becomes larger with decreasing the annular space. It is found the non-linear effects of the convection terms on the flow and the load are important. especially on the attitude angle, for relatively wide annular configurations however, the effects on those are minor for very narrow annular ones.

• Tribology and Lubricants
• /
• 제25권5호
• /
• pp.330-334
• /
• 2009

Hydraulic servo cylinders have been used to control accurately a large machine in power plant. Especially, Piston head and bush of servo cylinder is assembled sleeve and piston head and bush made of Cu alloy and pad sealing part. A damages of sleeve and piston head, bush are caused by friction and wear. Thus, It is necessary to examine friction and wear characteristics of Cu alloys for the piston head and bush. In this study, to be reliable on the piston and cylinder parts, dry friction and wear experiments were carried out with Cu alloys of four kinds of AlBC, PBC, BC and BS using reciprocating friction tester of pin on disk type. From this study, the result was shown that the AlBC and PBC with alloy elements were excellent to resistance wear. As the sliding speed was increased, the wear loss of PBC decreased than another Cu alloy.