• 한국지반공학회논문집
• /
• 제20권6호
• /
• pp.75-83
• /
• 2004

본 논문에서는 사질토의 취성적 응력-변형률 관계와 전단시 체적팽창을 고려할 수 있는 구성모델에 대한 연구를 수행하였다. 제안된 모델은 일반등방경화규칙에 의거한 비등방 경화규칙을 적용하였으며, 항복면의 형태는 응력공간에서 원통형으로 나타나는 단순한 형태로 실용적으로 적용하기 편리하도록 하였다. 또한 유동규칙을 단순화하여 구체적인 팽창률 함수를 이용하여 정의하였다. 또한 가상적인 첨두응력비를 정의하여 취성적 응력-변형률 관계를 모델링하는 것이 가능하였다. 이러한 구성모델은 수학적 정식화를 한 후 실험자료와 비교하도록 프로그램을 구현하였다. 동반논문에서는 삼축실험결과와 비교하여 검증할 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.484-489
• /
• 2003

The mass flow rate of gas flow through critical nozzle depends on the nozzle supply conditions and the cross-sectional area at the nozzle throat. In order that the critical nozzle can be operated at a wide range of supply conditions, the nozzle throat diameter should be controlled to change the flow passage area. This can be achieved by means of a variable critical nozzle. In the present study, both experimental and computational works are performed to develop variable critical nozzle. A cone-cylinder with a diameter of d is inserted into conventional critical nozzle. It can move both upstream and downstream, thereby changing the cross-sectional area of the nozzle throat. Computational work using the axisymmetric, compressible Navier-Stokes equations is carried out to simulate the variable critical nozzle flow. An experiment is performed to measure the mass flow rate through variable critical nozzle. The present computational results are in close agreement with measured ones. The boundary layer displacement and momentum thickness are given as a function of Reynolds number. An empirical equation is obtained to predict the discharge coefficient of variable critical nozzle.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.87-96
• /
• 1996

The proportional pressure control valve(PCV) is an essential component in the open loop controlled rear wheel steering gear of the four wheel steering(4WS) system on the passenger car. The valve should have versatile functions and higher performance. But, it is hard to find the proportional pressure control valve suitable for the 4WS system. In this paper, the determination of the valve parameters was studied by the stability discrimination and the characteristic analysis for the purpose of the development of a new PCV for the 4WS. The mathematical model of the valve was derived from the valve-cylinder system and the programme for numerical computation was developed. The transfer function of the system was obtained from the mathematical model. The characteristics of the valve were inspected through the experiment and compared to those obtained by numerical method. And then the stability discrimination of the system was done by root locus and the analysis of characteristics was done by the developed programme. From the experiment and the analysis of characteristics was done by the developed programme. From the experiment and the inspection, the appropriation of mathematical model and the usefulness of the programme were confirmed. And the parameters which might affect the performance of the valve can be determined by considering the stability discrimination, the characteristics analysis and required functions.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.30-39
• /
• 2001

The direct injection into the cylinders has been regarded as a way of the reduction in fuel consumption and pollutant emissions. The spray produced by the high pressure injector is of paramount importance in DISI(Direct Injection Spark Ignition) engines in that the primary atomization process must meet the requirement of quick and complete evaporation, mixing with air and combustion especially to prohibit the excessive HC emissions. The interaction between air flow and fuel spray was investigated in a steady flow system embodied in a wind tunnel to simulate the variety of flow inside the cylinder of the DISI engine. The direct Mie scattered and shadowgraph images presented the macroscopic view of the liquid sprays and vapor fields. The velocity and particle size of fuel droplets were investigated by phase doppler anenometer(PDA) system. The processes of atomization and evaporation with a DISI injector were observed and consequently utilized to construct the data-base for the spray and fuel-air mixing mechanism as a function of the flow characteristics.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.703-708
• /
• 2002

An elastomeric bushing is a device used in automotive suspension systems to reduce the load transmitted from the wheel to the frame of the vehicle. A bushing is an elastomeric hollow cylinder which is bonded to a solid steel shaft at its inner surface and a steel sleeve at its outer surface. The relation between the load applied to the shaft or sleeve and the relative deformation of Elastomeric bushing is nonlinear and exhibits features of viscoelasticity. A load-displacement relation fur elastomeric bushing is important fur dynamic numerical simulations. A boundary value problem for the bushing response leads to the load-displacement relation which requires complex calculations and is hence unsuitable. Therefore, by modifying the constitutive equation for a nonlinear viscoelastic incompressible material developed by Lianis, the data fur the elastomeric bushing material was obtained and this data was used to derive the new load-displacement relation fur radial response of the bushing. After the load relaxation function for the bushing is obtained from the step displacement control test, Pipkin-Rogers model was developed. Solutions were allowed for comparison between the results of Modified Lianis model and those of the proposed model. It is shown that the proposed Pipkin-Rogers model is in very good agreement with Modified Lianis model.

• 한국분무공학회지
• /
• 제10권3호
• /
• pp.38-44
• /
• 2005

The direct injection into the cylinders has been regarded as a way of the reduction in fuel consumption and pollutant emissions. The spray produced from the injector of DIS(Direct Injection Spark Ignition) engine is of paramount importance in DISI engines. Fan-spray injector as well as swirl-spray injector was developed and utilized to the DISI engines. The interaction between air flow and fuel spray was investigated in a steady flow system embodied in a wind tunnel to simulate the variety of flow inside the cylinder of the DISI engineer. The direct Mie scattered images presented the macroscopic view of the liquid spray fields interacted with crossflow. Particle sizes of fuel droplets were measured with phase Doppler anemometer(PDA) system. A faster cross-flow field made SMD larger and $D_{10}$ smaller. The experiments show the interaction of air flow field and the fuel spray field of fan-spray. The results can be utilized to construct the data-base for the spray and fuel-air mixing mechanism as a function of the flow characteristics.

• 전산구조공학
• /
• 제11권1호
• /
• pp.161-170
• /
• 1998

길이가 긴 원통형 실린더를 구성하는 데에 사용될 조인트 부재에 대한 공차설계를 수행하였다. 즉, 원통형 실린더를 체결할 때 사용되는 조인트 부품 가운데 스터드 볼트를 최소 민감도해석에 의해 공차설계를 하였다. 조인트 부재의 공차설계를 위한 최소 민감도 해석에 의한 정식화는 목적함수가 폰 마이세스 응력의 공차에 대한 민감도이고, 여러 부등호 제약식 중에서 자중이 부등호 제안식에 포함된다. 조인트 부재의 경우 자중에 대한 타당한 부등호 제안식을 설정하기 위하여 우선 확정적인 경우에 대한 최적설계를 수행하여 그 범위값을 선정하였다. 원통형 부재의 구조 응답은 축대칭 유한요소로서 구조해석을 수행하여 제안식을 설정하였으며, 직접미분에 의해서 설계 민감도를 구하여 ,최적화 알고리즘과 결합하여 최적의 공차를 제시하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.531-536
• /
• 2004

In-arm type hydropeumatic suspension unit(ISU) is an equipment of armed tracked vehicle to absorb impact load and vibration from the irregular ground. During the operation of ISU, main piston moves forward and backward and oil flowing through damper transmits the external impact load to floating piston. Heat is generated in ISU by the oil pressure drop through the damper orifice and the friction between cylinder wall and two pistons. On the other hand, internal heat dissipatis outside via heat convection. Occurrence of high temperature can deteriorate durability of major components and basic function of ISU. And, it can cause fatal problem in the ISU life time and the sealing performance of piston rings. As well, the spring constant change of nitrogen gas that is caused by the temperature rise exerts the negative effect to the vehicle stability. Therefore, in this paper, we analyze the heat transfer analysis of the entire ISU unit, by finite element method, with the outside flow velocities 8m/s and 10m/s.

• 기계저널
• /
• 제31권4호
• /
• pp.332-340
• /
• 1991

본 글에서는 속이 찬 실린더(solid cylinder)에서의 비대칭 탄성파전파 문제를 풀기 위한 해석적 방법의 일부를 소개하고자 한다. 속이찬 실린더에 있어서는 측면벽의 경계조건에 상관없이 평 판에서의 Fourier 시리즈와 유사한 단순해가 존재하지 않는다고 밝혀져 왔다(1). 그러나 최근 발표된 본인의 논문(2)에서 지적된 것처럼, 매우 특별한 측면 경계조건을 갖는 경우에만 정해가 존재한다. 특히 탄성파전파에 관한 한, 이러한 정해는 물리적으로 볼 때 팽창파(dilatational wave)와 전단파(shear wave)가 서로 얽히지 않는 상태에 해당되기 때문에, 소위 "비혼합 해(uncoupled solution)"라 불린다. 이 "비혼합해(uncoupled solution)"의 실제 사용 예를 들면, 상술된 바와 같이 일반적인 측면 경계조건을 갖는 속이 찬 실린더 문제를 풀기 위한 시도함 수(trial function)로 사용될 수 있을 것이다. 주지하는 바와 같이 자유측면벽(traction-free cylindrical wall)을 갖는 속이 찬 실린더는 공학적으로 매우 중요한 구조요소이다. 이 경우에는 측면벽의 경계조건으로 말미암아, 해가 정해의 형태로 존재하지 않는다. 특히 이 구조물에서의 탄성파전파 문제를 다루고자 할 때, 먼저 분산관계식(dispersion relation)을 구한 다음, 이를 이 용해 경계문제를 푸는 것이 상용적으로 사용되는 방법이다. 이 분산 관계식은 파장과 주파수 와의 관계를 나타내는 것으로, 그 복잡성으로 말미암아 이 식을 사용되는 수치해법으로 정확하게 구하는 것은 거의 불가능하다. 따라서, 본 글에서는 특별한 측면벽을 갖는 속이 찬 실린더의 비혼합해를 활용하여 자유측면벽을 갖는 속이 찬 실린더의 분산관계식(pochhammer의 분산관 계식이라 불린다)을 구하는 법을 설명하고자 한다. 이를 위해 비혼합해가 존재하는 측면경계조 건에 대해 먼저 살펴보고자 한다.조 건에 대해 먼저 살펴보고자 한다.

• Advances in Computational Design
• /
• 제4권4호
• /
• pp.367-379
• /
• 2019

Multiple Inputs and Multiple Outputs (MIMO) Fuzzy logic model is developed to predict the engine performance and emission characteristics of pongamia pinnata biodiesel with hydrogen injection. Engine performance and emission characteristics such as brake thermal efficiency (BTE), brake specific energy consumption (BSEC), hydrocarbon (HC), carbon monoxide (CO), carbon dioxide ($CO_2$) and nitrous oxides ($NO_X$) were considered. Experimental investigations were carried out by using four stroke single cylinder constant speed compression ignition engine with the rated power of 5.2 kW at variable load conditions. The performance and emission characteristics are measured using an Exhaust gas analyzer, smoke meter, piezoelectric pressure transducer and crank angle encoder for different fuel blends (Diesel, B10, B20 and B30) and engine load conditions. Fuzzy logic model uses triangular and trapezoidal membership function because of its higher predictive accuracy to predict the engine performance and emission characteristics. Computational results clearly demonstrate that, the proposed fuzzy model has produced fewer deviations and has exhibited higher predictive accuracy with acceptable determination correlation coefficients of 0.99136 to 1 with experimental values. The developed fuzzy logic model has produced good correlation between the fuzzy predicted and experimental values. So it is found to be useful for predicting the engine performance and emission characteristics with limited number of available data.