• Geomechanics and Engineering
• /
• 제37권2호
• /
• pp.167-178
• /
• 2024

The natural frequency shift under cyclic environmental loads is a key issue in the design of monopile-based offshore wind power turbines because of their dynamic sensitivity. Existing evidence reveals that the natural frequency shift of the turbine system in sand is related to the varying foundation stiffness, which is caused by soil deformation around the monopile under cyclic loads. Therefore, it is an urgent need to investigate the effect of soil deformation on the system frequency. In the present paper, three generalized geometric models that can describe soil deformation under two-way cyclic loads are proposed. On this basis, the cycling-induced changes in soil parameters around the monopile are quantified. A theoretical approach considering three-spring foundation stiffness is employed to calculate the natural frequency during cycling. Further, a parametric study is conducted to describe and evaluate the frequency shift characteristics of the system under different conditions of sand relative density, pile slenderness ratio and pile-soil relative stiffness. The results indicate that the frequency shift trends are mainly affected by the pile-soil relative stiffness. Following the relevant conclusions, a design optimization is proposed to avoid resonance of the monopile-based wind turbines during their service life.

• 한국통신학회논문지
• /
• 제41권12호
• /
• pp.1700-1706
• /
• 2016

본 논문은 동시 전송 가능한 사물지능 통신 트래픽의 수를 늘리기 위하여 doubly truncated cyclic code shift keying (DTCCSK)을 활용한 대역 확산 알로하 기법을 제안한다. 제안하는 DTCCSK는 정사각형으로 표시되는 cyclic code shift keying 코드셋의 우측과 하단을 절삭함으로써 생성 가능하며, spreading factor와 심볼 길이를 자유롭게 설계할 수 있는 특징을 가진다. 또한 DTCCSK는 대역 확산 알로하의 변복조 기법으로 주로 사용되는 direct sequence 보다 높은 주파수 효율을 보이면서도 M-ary 시그널링 기법에 비해서는 낮은 구현 복잡도로 구현이 가능하다. 본 논문은 사물지능 통신을 위해 대역 확산 알로하를 채택한 S-band mobile interactive multimedia 표준을 참고하여 시뮬레이션 환경을 구성하였고 DTCCSK의 성능을 검증하였다.

• 호남수학학술지
• /
• 제26권2호
• /
• pp.147-153
• /
• 2004

We provide some sufficient conditions for the adjoint of a unilateral weighted shift operator on a Hilbert space to be cyclic.

• 전기전자학회논문지
• /
• 제16권1호
• /
• pp.51-55
• /
• 2012

본 논문에서는 순환천이변조 (CCSK: cyclic code shift keying) 시퀀스로 삼진 시퀀스를 적용하는 것을 제안하였다. 그리고 순환천이변조를 적용한 주파수도약대역확산/시분할다중접속 (FHSS/TDMA: frequency hopping spread spectrum/time division multiple access) 시스템에서 성능을 모의실험 하였다. 실험에서 무선 채널은 레일레이(Rayleigh) 페이딩 채널로 모델링하였다. 모의 실험 결과로부터 순환천이변조 시퀀스로 무작위 시퀀스를 사용한 시스템보다 삼진 시퀀스를 적용한 시스템이 더 높은 성능을 보이는 것이 증명되었다.

• 대한전자공학회논문지TC
• /
• 제47권6호
• /
• pp.42-48
• /
• 2010

군용 통합 전술 정보 통신 체계(JTIDS: Joint Tactical Information Distribution System)에서 사용하는 기저대역 변조 방식 중 하나인 순환 부호 편이 변조 (CCSK: Cyclic Code Shift Keying) 방식은 5개의 비트를 32개의 32칩 수열로 변환하는 일종의 직접 수열 기반 대역 확산 변조 방식이다. 순환 부호 편이 변조 방식은 총 32개의 비직교 수열을 사용한다. 본 논문에서는 CCSK를 기반으로 하는 비동기 검파 성능을 분석하였다. 또한, 보다 나은 성능을 가지는 32칩 수열을 제안하고, 종래의 32칩 수열과 성능을 비교하였다.

• 한국통신학회논문지
• /
• 제18권1호
• /
• pp.83-91
• /
• 1993

디지틀 전송 시스팀에서 순방향 에러 제어(Forward Error Control) 방식으로 에러를 검출할 수 있는 성능과 구현의 용이함에 의해 Cyclic Redundancy Chedk(CRC) code가 널리 사용도고 있다. 즉, 간단한 몇개의 shift register와 modulo2 가산기를 이용하여 회로를 구성하고 입력 데이터 열을 직렬로 입력하면 최종적으로 shift register에 남아 있는 값이 CRC code가 되어 입력 데이터 열을 전송한 뒤 shift register의 값들을 순차적으로 전송하는 방식으로 전성 사의 에러를 검출하고 수정한다. 그러나 전송속도가 높아짐에 따라 직렬 데이터를 이용하여 CRC code를 생성하는 회로를 구현하는 것은 반도체 소자의 속도 제약 때문에 많은 어려움이 따른다. 따라서 본 논문에서는 주문형 반도체 개발시 반도체 소자의 속도 제약 문제를 해소하기 위하여 입력데이터 열을 병렬로 입력하여 직렬로 수행하는 방식과 동일한 방식으로 동작하는 병렬 CRC code 생성방식 및 syndrome 계산방식을 제안하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권8호
• /
• pp.2879-2899
• /
• 2021

The tone reservation (TR) scheme is an attractive method to reduce peak-to-average power ratio (PAPR) in the filter bank multicarrier with offset quadrature amplitude modulation (FBMC-OQAM) systems. However, the high PAPR of FBMC signal will severely degrades system performance. To address this issue, a cyclic shift based TR (CS-TR) scheme with embedding side information (SI) is proposed to reduce the PAPR of FBMC signals. At the transmitter, four candidate signals are first generated based on cyclic shift of the output of inverse discrete Fourier transform (IDFT), and the SI of the selected signal with minimum peak power among the four candidate signals is embedded in sparse symbols with quadrature phase-shift keying constellation. Then, the TR weighted by optimal scaling factor is employed to further reduce PAPR of the selected signal. At the receiver, a reliable SI detector is presented by determining the phase rotation of SI embedding symbols, and the transmitted data blocks can be correctly demodulated according to the detected SI. Simulation results show that the proposed scheme significantly outperforms the existing TR schemes in both PAPR reduction and bit error rate (BER) performances. In addition, the proposed scheme with detected SI can achieve the same BER performance compared to the one with perfect SI.

• ETRI Journal
• /
• 제42권3호
• /
• pp.324-332
• /
• 2020

In this paper, a blind symbol timing offset (STO) estimation method is proposed for offset quadrature phase-shift keying (OQPSK) modulated signals, which also works for other linearly modulated signals (LMS) such as binary-PSK, QPSK, 𝜋/4-QPSK, and minimum-shift keying. There are various methods available for blind STO estimation of LMS; however, none work in the case of OQPSK modulated signals. The popular cyclic correlation method fails to estimate STO for OQPSK signals, as the offset present between the in-phase (I) and quadrature (Q) components causes the cyclic peak to disappear at the symbol rate frequency. In the proposed method, a set of close and approximate offsets is used to compensate the offset between the I and Q components of the received OQPSK signal. The STO in the time domain is represented as a phase in the cyclic frequency domain. The STO is therefore calculated by obtaining the phase of the cyclic peak at the symbol rate frequency. The method is validated through extensive theoretical study, simulation, and testbed implementation. The proposed estimation method exhibits robust performance in the presence of unknown carrier phase offset and frequency offset.

• 대한수학회보
• /
• 제60권2호
• /
• pp.443-460
• /
• 2023

A binary linear code is said to be a ℤ₂-double cyclic code if its coordinates can be partitioned into two subsets such that any simultaneous cyclic shift of the coordinates of the subsets leaves the code invariant. These codes were introduced in [6]. A ℤ₂-double cyclic code is called reversible if reversing the order of the coordinates of the two subsets leaves the code invariant. In this note, we give necessary and sufficient conditions for a ℤ₂-double cyclic code to be reversible. We also give a relation between reversible ℤ₂-double cyclic code and LCD ℤ₂-double cyclic code for the separable case and we present a few examples to show that such a relation doesn't hold in the non-separable case. Furthermore, we list examples of reversible ℤ₂-double cyclic codes of length ≤ 10.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권3호
• /
• pp.107-110
• /
• 2006

We fabricated the monolayers onto QCM by self-assembly using viologen, which has been widely used as electron acceptor. A gold electrode of the QCM was cleaned by piranha solution and prepared the ethanol-acetonitrile(1:1) solution with 2 m mol/l viololgen compounding of pure hi gas. We determined the time dependence to resonant frequency shift during self-assembly process and the electrochemical behavior of the self-assembled viologen monolayers by cyclic voltammetry. With increasing scan rate, the redox peak current of the viologen increased linearly. This was signified that the redox reaction was reversible. The EQCM measurements revealed the anions transfer during redox reactions, respectively. From the EQCM data, the well-defined shape peaks were nearly equal charges by cyclic voltammetry.