• 제목/요약/키워드: cyclic boundary condition

검색결과 29건 처리시간 0.022초

유한 단층 모델 및 순환 경계조건을 이용한 전지구 지진해일 예측 시스템 개발 (Development of the Global Tsunami Prediction System using the Finite Fault Model and the Cyclic Boundary Condition)

  • 이준환;박은희;박순천;우승범
    • 한국해안·해양공학회논문집
    • /
    • 제27권6호
    • /
    • pp.391-405
    • /
    • 2015
  • 본 연구에서는 원거리 지진해일에 대응하기 위한 기초 연구로써 유한 단층 모델과 순환 경계조건을 이용한 전지구 지진해일 예측 시스템을 제안하였다. 제안한 전지구 지진해일 예측 시스템을 2014년 칠레 지진해일에 적용하여 원거리 지진해일에 대한 대응 시스템으로써의 가능성을 검토하였다. 전지구 지진해일 예측 시스템의 경계조건, 지배방정식, 격자 크기, 단층 모델에 따른 지진해일 파고와 도달시각을 DART 부이, 조위관측소 관측 자료와 비교함으로써 유한 단층 모델과 순환 경계조건의 중요성을 확인하였다.

경북 고령군 강변여과 취수 지역의 지하수 유동 모사 및 민감도 분석 (Simulation of Groundwater Flow and Sensitivity Analysis for a Riverbank Filtration Site in Koryeong, Korea)

  • 원이정;구민호;김형수
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제11권2호
    • /
    • pp.45-55
    • /
    • 2006
  • 강변여과수 취수 방식의 도입이 고려되었던 경상북도 고령군 낙동강변의 충적대수층을 대상으로 2차원 지하수 유동모사를 수행하여, 취수정 및 주변 대수층에서의 지하수위와 하천수 유입량의 계절적 변화를 분석하였다. 개념모델의 하천 경계조건은 연평균 하천수위를 고정 수두로 설정하는 경우와 실제 관측된 시계열 자료를 이용하여 변동 수두로 설정하는 경우로 구분하여 모사를 수행하였다. 모사 결과 산정된 하천수 유입 비율은 고정하천수두 모사의 경우 연중 $74.3{\sim}87.0%$의 범위를 보이며 연평균 82.4%인 반면, 변동하천수두 모사의 경우 $52.7{\sim}98.1%$, 연평균 78.5%로 나타났다. 따라서 시기별로 변동하는 하천수위가 하천수 유입 비율에 큰 영향을 미치며, 하천수 유입 비율을 정확하게 산정하기 위해서는 변동하천수두 조건을 이용해야 하는 것으로 해석된다. 강변으로부터 취수정까지의 이격거리를 변화시키면서 모사를 반복 수행한 결과 취수정 이격거리가 커질수록 하천수 혼합 비율은 다소 감소하지만 그 영향이 수 % 정도로 매우 작게 나타났다. 강변여과 취수 시 지하수위 및 하천수 혼합비율에 영향을 미치는 인자인 대수층의 수리전도도 및 저유계수, 지하수 함양량, 취수량 등에 대한 민감도 분석을 수행하였다. 대수층의 평균 지하수위와 하천수 유입 비율은 취수량과 지하수 함양량 변화에 민감한 반면, 취수정의 지하수위는 수리전도도와 취수량에 민감한 것으로 나타났다.

비정렬 기반의 CFD 프로그램 개발 (DEVELOPMENT OF CFD PROGRAM BASED ON UNSTRUCTURED GRID SYSTEM)

  • 이정희;이상혁;이명성;허남건
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2010년 춘계학술대회논문집
    • /
    • pp.524-529
    • /
    • 2010
  • In the present study, a CFD program is developed for the Fluid-Structure Interaction(FSI) analysis. The non-staggered, non-orthogonal, and unstructured grid system was also used to handle the complicated geometries in the program. In order to validate the capabilities of the developed CFD program, various models are investigated by using unstructured and nonorthogonal meshes. The predicted results are a good agreement with analytic solution, experimental data and commercial software. And also PISO algorithm is applied for transient flow analysis. The cyclic boundary condition and baffle cell are developed in order to improve the effectiveness of the calculation for complex geometry.

  • PDF

3차원 천음속 원심압축기 디퓨저 성능연구 (Performance Analysis of Three-Dimensional Transonic Centrifugal Compressor Diffuser)

  • 김상덕;송동주
    • 한국유체기계학회 논문집
    • /
    • 제2권1호
    • /
    • pp.64-72
    • /
    • 1999
  • CSCM upwind flux difference splitting compressible Navier-Stokes method has been used to predict the transonic flows in a centrifugal compressor diffuser. The modified cyclic. TDMA and the mass flux boundary conditions were used as boundary conditions of the diffuser analysis. Broad flow separation on the suction surface near the hub and shroud was observed from the results of the mass flow rates 5.8, 6.0 and 6.2kg/s at 27000 rpm. The three-dimensional flow analysis predicted successfully that the static pressure increased and the total pressure decreased through the flow passage of the channel diffuser when compared to two-dimensional analysis due to the strong effect of the three-dimensional flow. The mass averaged loss coefficients and pressure coefficients were also studied.

  • PDF

Seismic demand estimation of electrical cabinet in nuclear power plant considering equipment-anchor-interaction

  • Cho, Sung Gook;Salman, Kashif
    • Nuclear Engineering and Technology
    • /
    • 제54권4호
    • /
    • pp.1382-1393
    • /
    • 2022
  • This paper investigates the seismic behavior of an electrical cabinet considering the influence of equipment-anchor-interaction (EAI) that is generally not taken into consideration in a decoupled analysis. The hysteresis behavior of an anchor bolt in concrete was thereby considered to highlight this interaction effect. To this end, the experimental behavior of an anchor bolt under reversed cyclic loading was taken from the recently developed literature, and a numerical model for the anchor hysteresis was developed using the component approach. The hysteresis properties were then used to calibrate the multi-linear link element that is implemented as a boundary condition for the cabinet incorporating the EAI. To highlight this EAI further, the nonlinear time history analysis was performed for a cabinet considering the hysteresis behavior comparative to a fixed boundary condition. Additionally, the influence on the seismic fragility was evaluated for the operational and structural condition of the cabinet. The numerical analysis considering the anchor hysteresis manifests that the in-cabinet response spectra (ICRS) are significantly amplified with the corresponding reduction in the seismic capacity of 25% and 15% for an operational and structural safety condition under the selected protocols. Considering the fixed boundary condition over a realistic hysteresis behavior of the anchor bolt is more likely to overestimate the seismic capacity of the cabinet in a seismic qualification procedure.

A SYUDY ON THE OPTIMAL REDUNDANCY RESOLUTION OF A KINEMATICALLY REDUNDANT MANIPULATOR

  • Choi, Byoung-Wook;Won, Jong-Hwa;Chung, Myung-Jin
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
    • /
    • pp.1150-1155
    • /
    • 1990
  • This paper proposes an optimal redundancy resolution of a kinematically redundant manipulator while considering homotopy classes. The necessary condition derived by minimizing an integral cost criterion results in a second-order differential equation. Also boundary conditions as well as the necessary condition are required to uniquely specify the solution. In the case of a cyclic task, we reformulate the periodic boundary value problem as a two point boundary value problem to find an initial joint velocity as many dimensions as the degrees of redundancy for given initial configuration. Initial conditions which provide desirable solutions are obtained by using the basis of the null projection operator. Finally, we show that the method can be used as a topological lifting method of nonhomotopic extremal solutions and also show the optimal solution with considering the manipulator dynamics.

  • PDF

Experimental and numerical analyses on axial cyclic behavior of H-section aluminium alloy members

  • Wu, Jinzhi;Zheng, Jianhua;Sun, Guojun;Chang, Xinquan
    • Structural Engineering and Mechanics
    • /
    • 제81권1호
    • /
    • pp.11-28
    • /
    • 2022
  • This paper considers the combination of cyclic and axial loads to investigate the hysteretic performance of H-section 6061-T6 aluminum alloy members. The hysteretic performance of aluminum alloy members is the basis for the seismic performance of aluminum alloy structures. Despite the prevalence of aluminum alloy reticulated shells structures worldwide, research into the seismic performance of aluminum alloy structures remains inadequate. To address this deficiency, we design and conduct cyclic axial load testing of three H-section members based on a reliable testing system. The influence of slenderness ratios and bending direction on the failure form, bearing capacity, and stiffness degradation of each member are analyzed. The experiment results show that overall buckling dominates the failure mechanism of all test members before local buckling occurs. As the load increases after overall buckling, the plasticity of the member develops, finally leading to local buckling and fracture failure. The results illustrate that the plasticity development of the local buckling position is the main reason for the stiffness degradation and failure of the member. Additionally, with the increase of the slenderness ratio, the energy-dissipation capacity and stiffness of the member decrease significantly. Simultaneously, a finite element model based on the Chaboche hybrid strengthening model is established according to the experiment, and the rationality of the constitutive model and validity of the finite element simulation method are verified. The parameter analysis of twenty-four members with different sections, slenderness ratios, bending directions, and boundary conditions are also carried out. Results show that the section size and boundary condition of the member have a significant influence on stiffness degradation and energy dissipation capacity. Based on the above, the appropriate material constitutive relationship and analysis method of H-section aluminum alloy members under cyclic loading are determined, providing a reference for the seismic design of aluminum alloy structures.

3차원 천음속 원심압축기 디퓨져 성능연구 (Performance Analysis of Three-Dimensional Transonic Centrifugal Compressor Diffuser)

  • 김상덕;송동주
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 1998년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.217-222
    • /
    • 1998
  • CSCM upwind flux difference splitting compressible Navier-Stokes method has been used to predict the transonic flows in centrifugal compressor diffuser. The modified cyclic TDMA and the mass flux boundary conditions were used as boundary conditions of the diffuser analysis. With the mass flux boundary condition and the $130{\times}80{\times}40$ grid, the compressible upwind Navier-Stokes method predicted the transonic diffuser flowfield successfully. Plow changes in the impeller exit region due to the strong interaction between impeller exit and vaned diffuser, broad flow separation on the suction surface near hub and shroud was observed from the results of the mass flow rates 6.0 and 6.2kg/s at 27000 rpm. The static pressure increased and the total pressure decreased through the flow passage of the channel diffuser, which were predicted better from the three-dimensional analysis than from the two-dimensional analysis due to the strong effect of the three-dimensional flow. The mass averaged loss coefficients and pressure coefficients were also studied.

  • PDF

교번흐름 조건에 따른 토목섬유 필터층의 재료분리 및 지오텍스타일의 피로영향 분석 (Fatigue Effect and Particle Rearrangement of Geosynthetics Filter Layer with Cyclic Flow Conditions)

  • 오영인;유전용;김현태
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.1554-1561
    • /
    • 2005
  • Geotextiles form one of the two largest groups of geosynthetics and it is consisted two major types of synthetic material (Woven, Non-woven). The functions of geotextiles are separation, reinforcement, filtration, drainage and as a moisture barrier. Within these functions, however, there are a large number of applications or use areas. Although the many research scholar and engineer developed and established the design criteria and construction methodology of geosynthetics filter layer, because the lack of suitable design terminology and uncertainty of long term durability, sustainable research still needed for optimum design methodology to the complicate field conditions. Especially, more intensive research needed about under the cyclic flow condition and fine silty sand base material. In this paper, the filter model test performed under cyclic flow with various boundary conditions (period and frequency of cyclic flow, types of geosynthetic filter material, surcharge etc.).

  • PDF

지진시 지반의 반복경화/연화 현상에 의한 부지응답 특성 영향 연구 (Cyclic Hardening and Degradation Effects on Site Response during an Earthquake)

  • 이진선
    • 한국지진공학회논문집
    • /
    • 제12권6호
    • /
    • pp.65-71
    • /
    • 2008
  • 본 논문에서는 반복하중에 의한 반복 경화 및 연화 현상을 나타낼 수 있는 수정 IWAN 모델을 이용하여, 1차원 비선형 부지응답 해석프로그램(이하 KODSAP; Kaist One Dimensional Site-response Analysis Program)을 개발하였다. 개발된 프로그램은 지진하중 재하에 따른 지반의 반복경화 및 연화현상에 의한 부지응답 특성 변화를 재현할 수 있다. KODSAP을 이용하여 기반암 상부 40m인 모형지반의 반복경화 및 연화 정도, 지진가속도의 크기에 따른 부지응답특성 변화를 살펴 보았으며, 현재 실무에서 널리 적용되고 있는 등가선형, 비선형해석과 KODSAP 해석결과(지반의 반복경화 및 연화현상을 고려한)과의 차이점을 살펴 보았다.