• The Journal of Engineering Geology
• /
• v.10 no.2
• /
• pp.18-35
• /
• 2000

The most dominant type of landslide in Korea is debris flows which mostly take place along mountain slopes during the rainy season, July to August. The landslides have been reported to begin activation when rainfall is more than 200mm within 2days. The debris flows are usually followed by translational slips which occur upper part of mountain slopes and they transit to debris flow as getting down to the valleys. Lithology, location, slope inclination, grain size distribution of soil, permeability, dry density and porosity have been proved as triggering factor causing translational slides. The triggering data taken from mapping are statistically analysed to get landslide potential quantitatively. Rock mass creeps mostly occur on well bedded sedimentary rocks in Kyeongsang Basin. Although the displacement of rock mass creep is relatively small about 1m, the creep can cause severe hazards due to relatively large volume of the involved rock mass. Examples are rock mass creep occurred in the mouth of Hwangryongsan Tunnel, in Chilgok and in Sachon in 1999. Although the direct factor of the creeps are due to slope cutting at the foot area, more attention is required A rotational slide occurring within thick soil formation or weathered rock is also closely related to bottom part of slope cutting. It is propagated circular or semi-circular type. Especially in korea, the rotational slide may be frequently occurred in Tertiary tuff area. Because they are mainly composed of volcanic ash and pyroclastic materials, well developed joints and high degree of swelling and absorption can easily cause the slide. The landslide among the Pohang-Guryongpo national road is belong to this type of slide.

• Journal of Ecology and Environment
• /
• v.30 no.4
• /
• pp.293-305
• /
• 2007

This study examined the distribution, population and vegetation structure of Corylopsis coreana in South Korea. C. coreana is distributed around the Suncheon area, Jeollanam-do, on the southern part of the Korean Peninsula, but the species is also found in Pocheon and Gangneung, on the central and central east parts of the peninsula. This discontinuous pattern of distribution is coupled with the unusual feature of only growing on northern exposed slopes. The mean density of C. coreana populations is 35 individuals per 100 $m^2$, ranging up to a maximum of 92 individuals per 100 $m^2$. Cut specimens sprouted a maximum of 38 stems per plant. Based on DCA analysis, the species' habitats was divided into three types by species composition and stratification structure. These types include: habitats affected strongly by human activities, valley and mantle communities which are affected relatively little by human activities, and stable forests. Populations affected by artificial intervention have actually flourished, while some populations in the stable forest system have declined. We conclude that the species, now endangered, should be maintained by means of specific external interventions such as cutting or removal of the canopy. To this end, further ecological data should be collected through monitoring and research to identify appropriate interventions to support threatened C. coreana populations.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.529-536
• /
• 2003

In domestic case occurrence of cut slopes according to construction and expansion of road is necessary more than 70% of country has been consisted of mountain area. In the case of Kang-won Do, there are much mountains locals in road wiping away a disgrace and expanded and slant is connoting collapse danger of incision side by each kind calamity being urgent. When route alteration enforces disadvantageous road extension, stability examination and processing way about large slope happened are serious. During road extension work in the Kang-won DO secure stability for falling rock of road slope and failure that happen and established suitable reinforcement and countermeasure in reply in necessity. The Slope is divided rock slope and soil slope, and then in order to analysis soil slope apply LEM theory. And rock slope examined stability about stereographic projection and wedge failure. Is going to utilize in reinforcement and failure prevention if it is efficient cutting as reinterpreting stability and secure stability and wish to consider effective and robust processing plan of great principle earth and sand side, and present countermeasure inside with these data hereafter applying suitable reinforcement countermeasure about unstable section.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.3
• /
• pp.13-20
• /
• 2005

This study was conducted to suggest the ecological restoration methods of the decomposed granite cut-slope by organic soil amendment materials. Field test carried out for the cut-slope with organic soil amendment materials method and other three revegetation methods in Cheongwon. Test revegetation plants were Festuca arundinacea, Lolium perenne, Dactylis glomerata, Lespedeza cyrtobotrya, and Arundinella hirta. The result of this study can be summarized as follows; 1. The soil hardness, the soil acidity, and the soil humidity of organic soil amendment materials method were at a suitable value for plants growth. And it was better as compared with other three revegetation methods of cutting-rock slopes. 2. The result of toxic substance investigation, all items were at a suitable for standard law. 3. During one year after seeding, most plants germinated and especially Festuca arundinacea and Dactylis glomerata grows well. Seedling numbers were 336.7 per $m^2$(after 6 months), 183.3 per $m^2$(after 10 months), and 353.3 per $m^2$(after 6 months). Ten months later after seeding, plants showed 80% ground coverage. Visual rate, plant height, and growth rate were excellence, Also, high plant growth in spring better than autumn.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.8-15
• /
• 2016

Most machines lose a lot of energy due to friction. Wear due to friction also reduces performance. Therefore, it is important to reduce friction on the surface to improve energy efficiency and decrease wear. Surface texturing refers to making patterns on the surface for reducing friction. There are many surface texturing methods, such as using lasers, abrasive jet machining, and so on. Recently, mechanical manufacturing methods, such as cutting and grinding, have been highlighted. Among them, the grinding method has the advantage of making patterns in large areas quickly. Therefore, it is appropriate for surface texturing on large machines. This paper is a study on the slope change of the surface texturing pattern using grinding. Therefore, we researched the slopes of the patterns corresponding to "spindle speed and feed rate" and "curvature of workpiece surface" using a mathematical model and experiment. As a result, we made a proper mathematical model concerning our research. Therefore, using the mathematical model in this paper, we could predict the slope change of the pattern according to grinding conditions.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.23 no.1
• /
• pp.86-102
• /
• 1981

The soil test data of 28 earth dams, scheduled to be constructed in Kore3, were selected for this study. The safety factors of their side slops were computed using Fellenius' "slice Method" by computer. The results summarized in this study are as follows; 1. Dam sections can be easily determined by fig.10 without a time consuming trial and error calculations of assumed sections. 2. For the economical design of earth dam sections, it was found that more cohesive soil was suitable for lower dams(dam height less than 25m) and soils with a higher friction angle was better for higher dams 3. In the case that used soil materials have the same Internal friction angle, side slope increase was almost same. 4. The relationship between side slope and friction angle was found as log.S=a tan ø+b (Fig. 7) 5. The relationship between side slope and cohesion (c) was also found as log. S=a c+b (Fig. 8) 6. The change of safety factors due to the change of central core materials was very little (Table-2) 7. The decrease of safety factors according to the unit weight increase of embankment materials was negligible. 8. In general the relationship between the wet unit weight and the saturated unit weight was r sat = (rt)$^2$+0. 140. This study will contribute to the determination of economic and safe planning and designing of earth dams, embankments and cutting side slopes.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.20 no.3
• /
• pp.33-43
• /
• 1992

The perceptual characteristic on the slope scenery around highway is very similar as the general perceptual characteristic in the landscape. This process determines by the relationship between the scenery observers and the characteristics of its place. It is very important to have a analysis on highway slope scenery in our particular culture in Korea since our country's highways are done by cutting mountains : therefore, we have a lot of slopes around highways. The physical characteristics on the highway scenery determines how we should build scenery around highway to a satisfactory level. The results drawn from this research work are as follow: 1) The satisfaction for slope scene had been affected by sex, native and experience of travel. I thought that the slope scene having peculiar form will offer the highest satisfaction. 2) Psychological factor, reflected satisfaction of slope scene, 몽 a grip of three factors as the factor of evaluation, texture, formation, and presumption formula is : Satisfaction=1.04(Evauluation factor)+0.83(Texture factor)+0.15(Formation factor)+4.28)R2=0.69). 3) Vine among the vegetation componeents of slope scene highly correlated with the evaluation factor and grass, shrub correlated with the texture factor. 4) Rock among the structual components of slope scene highly correlated with the formation factor, and stockade, lattice correlated with the evalution factor. 5) Gradient among the properties which determined slope form, highly correlated with the formation factor.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.1 no.1
• /
• pp.95-101
• /
• 1998

In order to seek a efficiency of site cooperation and slope stabilization in a rock sloping work, it would rather take into consideration, in its importance, a concurrent performance of civil works and landscaping works than give any part a special priority. It can enable us to achieve an expanded scope of landscaping works and improvement of slope scenery via this sort of cooperation. However, this can not be achieved without assurance on the slope stabilization and scenic view of the project owner, and further via this cooperation, environmentally familiar works can be performed, becoming natural environment and minimizing damages on surrounding scenery and environment. It is foreseeable that improvement of functions of civil equipment, introduction of technology and development of landscaping materials can facilitate an improvement in the betterment of slope scenery. Landscaping related parties need to enhance their understanding of rock sloping and scenic view based on knowledge on the fundermental understanding of slope stabilization and on the base rock characteristics.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.137-150
• /
• 2002

Recently, plane failure mode occurred frequently along the bedding plane having low angle dip about 20 degree when cutting slopes were constructed in sedimentary rock region of the Gyeongsang Basin. Landslide of the Whangryeong Mountain which was occurred at Busan Metropolitan City in 1999 belongs to the category mentioned above. Reconstruction for cutting slope of the Whangryeong Mountain has finished in 2000 and final grade of reconstructed cutting slope is 1:2.0. To analyze slope failure mode for landslide of the Whangryeong Mountain, various analyses were performed such as in-situ investigation and test, drilling, laboratory test, aerial photograph interpretation, X-ray diffraction analysis, and slope stability analysis using Stereographic Projection and Limit Equilibrium methods. As the result, it is identified that tension cracks had been developed one year before the landslide took place. The tension crack semis to be formed by merging several joint sets. It appears that failure blocks broke down along the sliding planes of different layers. Risk of plane failure is conformed as a result of stability analysis using Stereographic Projection and Limit Equilibrium methods in case that greenish gray tuffaceous shales, regared as sliding planes, are weathered. From now on, a detailed investigation is needed for the thin layers which is sensitive to weathering, and stability analysis for this layer is performed at cut slope construction site having similar geological condition.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.4
• /
• pp.23-36
• /
• 2008

Soil nailing system can be mentioned to a method of supporting as the shear strength of in-situ soils is increased by passive inclusions. In the general soil nailing system, facing walls are used in two kind of a lattice concrete block or a cast in placed concrete wall. A case of lattice concrete blocks is used in slow slopes greater than 1(V):0.7(H). Also, a case of a cast in placed concrete wall is used in steep slopes less than 1(V):0.5(H). The cast in placed concrete walls are constructed to 30 cm thick together with a shotcrete facing. In this study, the assembling soil nailing method as a new soil nailing system will be proposed. This method is assembly construction using precast concrete panels with 20 cm thick. So, the ability of construction and the quality of facings can be improved more than a conventional soil nailing system. This method can be obtained the effects that a global slope stability increase, as precast concrete panels are immediately put on cutting face after excavating a slope. In this study, confining effects of concrete panels using the assembling soil nailing system were found out by large scaled load tests. In the tests, the load-settlement relationship to an assembling soil nailing system due to the stiff facings as concrete panels appeared to be better than a typical soil nailing system with shotcrete facings.