• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.5
• /
• pp.117-127
• /
• 2004

A risk analysis on the cutting slope of roads near Cheongju area was carried out with the data from geological map, field investigation, and laboratory test and with the Geographic Information System. A risk analysis method on the cutting slope of road using the Geographic Information System was developed with the data from geological map, field investigation and laboratory tests. In the GIS, road factors which are safety factor, class of road, slake index, slope-protection works, and height of slope in the cutting slopes are classified into some ranks, and their weighting factors were taken into account. This method can be applied effectively to a road management.

• Economic and Environmental Geology
• /
• v.33 no.1
• /
• pp.77-88
• /
• 2000

The goal of this study is to assess the spatial distribution of natural slopes and cutting slopes under would-be development. For this goal, a quantitative slope stability analysis method using GIS integrated with a computer program was developed. Through field investigations, the discontinuity parameters were collected such as orientation of discontinuity, persistence, spacing, JRC, JCS, and water depth. The distributions were interpolated from the ordinary kriging method in ARC/INFO GIS after variogram analysis. The layers showing all parameters needed for limit equilibrium analysis were constructed. The final layer using GIS works composed of 162,352 polygons, that is, unit slopes. The rock slope stability analysis program was coded by C++ language. This program can calculate geometrical vectors related to rock block failures using input orientation data and direction and dimension of strength to occur failure. Also, this can calculate shear strength of joints through empirical equations and quantitative factors of safety. This methodology was applied to the study area which is located in Jaecheon city and Danyang-gun of the northeastern Keumsu is about 135$km^2$. As a result, the study area was entirely stable but unstable, that is, factor of safety less than 1.0dominantly at the slopes near Keumsil, Daejangri, Keumsungmyun and Sojugol, Mt. Dongsan, Juksongmyun by the natural slope stability analysis. Assuming the cutting slope showing the same direction immediate, and quantitative analysis of factors of safety for a regional area could be conducted through GIS integrated with a computer program of limit equilibrium.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.2
• /
• pp.121-135
• /
• 2016

The present study is an analysis of the monitoring results of the four areas that underwent the experimental construction of Straw-net+seedspray, Vegetation media spray method(t=2cm), and Vegetation media spray method(t=3cm), with the purpose of selecting the adequate revegetation of cutting slopes in weathered granite soil. Cutting slopes are mostly designed in the Straw-net+seedspray method, but since weathered granite soil slopes tend to have an infertile soil quality that runs down, it is difficult for seed germination and growth. It is difficult to apply Straw-net+seedspray to weathered granite soil slopes considering the germination rate and coverage rate of the Straw-net+seedspray method, which accompanies erosion and scouring. The final conclusions are summarized as follows. First, Straw-net+seedspray has difficulty recruiting plants to infertile weathered granite soil, which results in a lower coverage rate and fewer species, so it is not adequate construction method. Second, Vegetation spraying methods with wet media are more advantageous in early revegetation. The wet construction methods are faster than the dry construction methods in terms of early germination and its early growth are more excellent. Third, when constructing Vegetation spray methods with dry media, it were more advantageous if the thickness was thicker. When the soil-media is thicker, the soil is resilient to droughts, so the thickness must be flexibly applied according to the soil quality and slant of the weathered granite soil slope. The present study is a monitoring result for some areas of Gangwon-do, so its results may differ from other areas.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.87-92
• /
• 2010

With recent localized heavy rain, the collapsing accident of the cut slopes occur repeatedly every year. The maintenance of the cut slopes is very crucial as the collapsing of cut slopes causes various calamities such as human causalities and sweeping away of the roads. By looking at the study of current situation of the cut slopes, designed for maintenance of cut slopes, the locations of the damaged districts are hard to figure out as they are represented through distance mark and longitude and latitude. In this paper has used NDGPS methods and VRS service through GPS signal corrections that are received by DGPS standard department to correctly analyze the exact location and the shape of the slope. The result of this analysis shows that both methods produce similar shape of the slope. Therefore, these two methods, NDGPS methods and VRS service, can be applied to other analysis of cut slopes in different areas.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.09a
• /
• pp.81-92
• /
• 2000

Green Slope(F.F.R : Fabric Form Reinforcement Method) is one of an environmental slope protection method at steep cutting sites. This method is that soil and rock at the steep slope is fixed using the environmental Fabric Form, Nail, Rock Bolt and Rock Anchor, And then, the surfaces covered with grasses or weeds. This method will be satisfied both safe slope protection and natural environment appearance. Green Slope is a useful method of the construction sites of steep cutting slopes.

• Korean Journal of Agricultural Science
• /
• v.25 no.1
• /
• pp.97-106
• /
• 1998

This study was carried out to investigate the problem of analysis method of circular sliding, which uses a high rate to work out a countermeasure for landslides. The results of this study were summarized as follows : 1. As a result of the analysis of sliding surface along the soil layers in forty model slopes, the boundary layer in weathered soil and weathered rock indicated a very high possibility of sliding than in other places. 2. Because most landslides in Korea occur along the discontinuity face at the boundary of soil layers, below 2m. from land surface, it is a good method for safe design to work the countermeasure for these kinds of landslides in cutting slopes. 3. When the inclination of slopes is fixed and the length of slopes is changed, the cercular sliding slopes were more safe as the soil layers are more shallow and the length of slopes are shorter, but the safety ratio of infinite sliding slopes was same as the other even though their length of slopes was different. 4. As a result of the analysis by cercular sliding analysis method and infinite sliding analysis method with some condition that the inclination of slopes was $30^{\circ}$ degree, because most landslides in Korea occur at this condition, these methods indicated different results to each other as well as cercular sliding analysis method showed too much safety ratio than infinite sliding analysis method.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1994.06c
• /
• pp.25-48
• /
• 1994

As Korea is a mountaneous country, many cut slopes are formed along the highways and in housing projects, by cutting through the layers which are composed of shallow soil depth and the underlying hard layers with different degrees of weathering. Such slopes are often foiled by heavy rainfall, and thus its effects on the slope instability are described in detail in. this paper. The importance of discontinuties on the slope stability as well as the effects of rainfall is emphasized for high quality design of cut slopes.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1997.09a
• /
• pp.73-94
• /
• 1997

• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.71-75
• /
• 2014

Forest roads failure is one of the most common problems caused by heavy rainfalls. This study investigated the characteristics on stabilization measures installed for cutting slopes failure of forest road resulted from heavy rainfalls. Three primary factors (slope length, slope gradient, soil type) affecting cutting slope failure were considered and stabilization measures were classified into two types (A type: wooden fence, vegetation sandbag, stone masonry; B type: wire cylinder, gabion, concrete retaining wall) through discriminant analysis based on their capacity of resistance to slope failure. Results showed that A type was mainly installed in such conditions as cut slope <8 m, cut slope gradient $30-40^{\circ}$ and soil type with soil while B type occurred in locational conditions as cut slope length >8 m, cut slope gradient < $30^{\circ}$ and > $30^{\circ}$, and soil type of gravelly soil and rock.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.1
• /
• pp.19-27
• /
• 2002

To investigate the dominant species and factors related with plant coverage by road structures and forest environment factors, forest roads elapsed from one year to twelve year after construction had been selected in six county(Gochang-gun, Muju-gun, Imsil-gun, Jangsu-gun, Jeongup-shi and Jinan-gun), and 20m segments were continuously set up in each road. The results obtained from this study are summarized as follows: The species diversity of Gochang, Muju, Imsil, Jangsu, Jeongup and Jinan were 1.304, 1.267, 1.308, 1.193, 1.289 and 1.018, respectively. In process of years, plant coverage was increased gradually and average of plant coverage was 15.3% in forest roads which elapsed three year, and was 86.5% in forest roads which elapsed nine year after construction. The dominant species in the cutting slope of surveyed area were covered with Arundinella hirta, Pinus rigida, Miscanthus sinensis var. purpurascens, Artemisia princeps var. orientalis, Pinus densiflora, Oplismenus undulatifolius, Rubus coreanus, Lysimachia clethroides, Lespedeza bicolor, and Alnus hirsuta of the 152 species. The high correlated factors between plant coverage and variables in cutting slopes appeared elapsed year, soil hardness, mean annual precipitation, vertical grade, inslope and arid humidity in surveyed area.