• 제목/요약/키워드: cutting slope

검색결과 197건 처리시간 0.022초

강원도 간성-현내 지역 화강암류 비탈면 안정성 검토 사례 연구 (Case Study of a Stability Analysis of a Granitoid Slope in the Gansung-Hyunnae area, GangwonDo)

  • 김홍균;김승현;옥영석;구호본
    • 지질공학
    • /
    • 제22권3호
    • /
    • pp.331-341
    • /
    • 2012
  • 화강암류 암석은 일반적으로 절리 발달이 미약하고 단층파쇄대가 잘 발달하지 않는 등 공학적으로 양질의 암석에 해당된다. 그러나 산학지구 붕괴 비탈면을 구성하는 지반은 화강암류로 구성되었음에도 불구하고, 깊은 토사층을 가지며, 불연속면이나 단층 등의 지질구조는 거의 관찰되지 않고, 표층붕괴가 발생한 형태에 해당된다. 본 비탈면의 안정성 고찰을 위해 3가지 경우(현재 단면, 최초 설계 단면, 수정 설계 단면)에 대한 강우지속시간과 간극수압 변화, 안전율 등에 관한 해석을 수행하였다. 강우 지속시간이 길어질수록 지하수위는 높이 20 m까지 상승하는 것으로 나타났으며, 최초 설계단계 단면의 2일 지속강우 기간에는 안전율이 확보되는 것으로 확인되지만, 4일 강우지속기간 동안에는 허용안전율을 만족하지 못하는 것으로 확인되었다. 수정 설계 단면에서는 4일 강우지속기간에도 안전율이 확보되므로 산학 지구는 1:1.8 경사도로 절취하는 것이 영구적인 안정성을 확보하는 방안이라고 판단된다.

경사면에서 참나무류 임분의 맹아 발생 및 생장 특성: 충청지역을 중심으로 (Characteristics of Occurrence and Growth for Oak Sprouts on the Slope: With Particular Focused on Chungcheong Region of South Korea)

  • 정상훈;이영근;이상태
    • 한국산림과학회지
    • /
    • 제107권4호
    • /
    • pp.336-343
    • /
    • 2018
  • 본 연구는 경사면에 분포하는 참나무류 임분의 성공적인 맹아갱신을 통한 후계림 조성 및 관리 기술 개발을 위해 수행되었다. 맹아갱신작업지의 1,451개 그루터기 높이 벌근경과 맹아발생 부위 수, 맹아 근원경 높이 등 맹아 발생과 생육에 관한 인자들을 조사하였다. 그루터기 벌근경이 커질수록 맹아발생량이 감소하거나 증가하였지만, 그루터기 높이에 따라 맹아발생량은 증가하는 경향을 보였다. 경사면 맹아갱신작업의 편의상 참나무류 임분은 사면상부 방향을 기준으로 낮게 벌채하기 때문에 사면상부와 하부 방향의 그루터기 높이차가 발생하는 것으로 파악되었다. 상대적으로 높이가 높은 사면하부 방향의 그루터기에서 맹아발생량이 많았으며, 사면하부 방향에서는 측면맹아, 사면상부 방향에서는 근부맹아 발생률이 높아 그루터기 높이차는 맹아가 발생하는 부위에 영향을 미치는 것으로 나타났다. 사면방향(상부 하부)에 따른 발생부위별 맹아 생장상태를 비교한 결과, 사면상부 방향에서는 생장량에 차이가 없는 반면 사면하부 방향에서는 측면맹아의 생장이 근부맹아 보다 높았다. 참나무류 맹아의 품질을 향상시키기 위해서는 경사면에 분포하는 참나무류 임분의 분포 특성을 고려하여 벌채면을 경사면과 평행하도록 그루터기 높이차를 줄여 측면맹아 발달을 억제하는 시업 적용이 필요하다.

Evaluation of the Wear Resistance of PVD Coatings on Drills by Using a Slurry Jet Impact Test

  • Iwai, Y.;Ueno, Y.;Suehiro, T.;Honda, T.;Hogmark, S.
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
    • /
    • pp.141-142
    • /
    • 2002
  • In this paper, we propose a slurry jet (water containing $1\;{\mu}m$ alumina particles) impact test in order to quickly evaluate the wear properties of physical vapor deposited (PVD) coatings on commercial cutting tools. Linear wear was obtained for bothe coating and substrate material, and the penetration through the coating into the substrate was signified by a sharp increase in slope of the wear versus time curve. The PVD coatings deposited on the tools showed the same wear rates as those on reference plate specimens produced by the same coating methods. We conclude that our proposed evaluation technique for coatings is considerably useful as a screening test when evaluating coated tools like twist drills, taps, end mills, gear hobs, etc.

  • PDF

비탈면 녹화에서 임목폐기물의 활용에 관한 연구 (A Study on the Use of Fresh Root-chips in Slope Revegetation Works)

  • 김남춘;이정호;이태옥;허영진
    • 한국환경복원기술학회지
    • /
    • 제11권4호
    • /
    • pp.119-128
    • /
    • 2008
  • In this study, we attempted to seek out the ways to recycle fresh root-chips in the slope revegetation works by breaking tree root wastes occurring during the construction works, also to review the applicability of fresh root-chips as the soil media in slope revegetation works. For this purpose, we organized test units in order to investigate on-site applicability of fresh root-chips (broken chips). In order to examine the desirable ration of combining fresh root-chips with the hydroseeding soil media on the cutting slopes, we organized test units depending on the amount of combination. The following is the main experimental results. 1. At first, we analyzed properties of hrdro-seeding soil media and soil of the experimental sites. The overall results demonstrate that all the test units show proper range for vegetation. 2. We believe that the physical properties of soils in the earlier phase of restoration works on the sloped sites are not greatly affected by the fact whether broken chips exist or not. However, as time elapses, broken chips needs to be investigated further on what kind of impact they have on the soil condition. 3. More species are found in the test unit combining broken chips and we believe that it will contribute to blossoming of green plants and ecological succession of neighboring plants. 4. We performed experiment on possibility for fresh root-chips as substitutes for the hydro-seeding soil-media. In the test unit that combines fresh root-chips, its mixture ratio tends to exceed that of the test unit that does not combine fresh root-chips by 5 %. In case of the Thick-Layer-Soil-Media Hydroseeding works, the mixture ratio of the test unit that combines fresh root-chips after 16 weeks exceeds that of the test unit that does not combine fresh root-chips by 75%. 5. From the result of our experiment, it is obvious that the ratio of mixture and the number of emerging species are higher for the test unit combining fresh root-chips than the test unit that does not combine them. In other words, we can replace the hydro-seeding-soil-media with some Fresh root-chips without affecting the physical property of soil.

현장계측 데이터를 이용한 일평균 대기온도 산정방법과 동상방지층 설계를 위한 동결지수 보정 (Computing Procedure of Daily Average Air Temperature using Field Data and Frost Index Calibration for Anti-Frost Heave Layer Design)

  • 조명환;김낙석;심재필
    • 대한토목학회논문집
    • /
    • 제31권3D호
    • /
    • pp.433-439
    • /
    • 2011
  • 도로의 동상방지층을 설치하기 위하여 동결심도(동결관입깊이)를 산정하는데, 동결지수는 $0^{\circ}C$ 이하의 기온과 영하온도의 지속시간을 곱한 값을 연간을 통하여 누계한 수치로 표시된다. 따라서, 일평균 대기 온도를 구하는 방법이 동결지수에 영향을 미칠 수 있다. 기상청의 경우 1999년을 기점으로 이전에는 1일 4회 평균 대기온도 제공하였으며, 현재는 1일 8회 평균 대기온도를 제공하고 있다. 본 연구에서는 이러한 일평균 대기온도를 산정하는 방법이 동결지수의 산정결과에 미치는 영향을 확인하기 위하여 한반도 남부(동결지수 $350^{\circ}C{\cdot}$일 미만) 6개 지역을 현장조건(저성토부, 절성경계부 및 절토부)에 따라 구분하여 15개소에 대하여 현장계측시스템을 구축하였다. 그리고 현장계측시스템으로부터 얻어진 대기온도를 통하여 동결지수를 산정하고 상호 비교분석 하였다. 비교분석 결과 일반적으로 1일 4회 평균 대기온도를 사용한 경우가 1일 8회 평균 대기온도를 사용하는 경우보다 약 3% 전후 큰 것으로 나타났으며, 본 연구 지역에 대한 동결지수를 결정할 때 동결지수를 보정할 수 있는 보정식을 제안하였다.

화강풍화토 흙깎기 비탈면 녹화공법 선정 방안 연구 (The Study on the Selection of Revegetation Methods on Weathered Granite Cut-soil Slopes)

  • 김남춘
    • 한국환경복원기술학회지
    • /
    • 제19권2호
    • /
    • pp.121-135
    • /
    • 2016
  • The present study is an analysis of the monitoring results of the four areas that underwent the experimental construction of Straw-net+seedspray, Vegetation media spray method(t=2cm), and Vegetation media spray method(t=3cm), with the purpose of selecting the adequate revegetation of cutting slopes in weathered granite soil. Cutting slopes are mostly designed in the Straw-net+seedspray method, but since weathered granite soil slopes tend to have an infertile soil quality that runs down, it is difficult for seed germination and growth. It is difficult to apply Straw-net+seedspray to weathered granite soil slopes considering the germination rate and coverage rate of the Straw-net+seedspray method, which accompanies erosion and scouring. The final conclusions are summarized as follows. First, Straw-net+seedspray has difficulty recruiting plants to infertile weathered granite soil, which results in a lower coverage rate and fewer species, so it is not adequate construction method. Second, Vegetation spraying methods with wet media are more advantageous in early revegetation. The wet construction methods are faster than the dry construction methods in terms of early germination and its early growth are more excellent. Third, when constructing Vegetation spray methods with dry media, it were more advantageous if the thickness was thicker. When the soil-media is thicker, the soil is resilient to droughts, so the thickness must be flexibly applied according to the soil quality and slant of the weathered granite soil slope. The present study is a monitoring result for some areas of Gangwon-do, so its results may differ from other areas.

서울 무악재 절취사면에서의 암판정 연구 (Classification of Rock Mass on Cutting Slopes in Muakjae, Seoul)

    • 터널과지하공간
    • /
    • 제9권2호
    • /
    • pp.158-167
    • /
    • 1999
  • 주관적이고 정성적인 암판정 방법들 때문에 굴착될 토충과암석의 물량과 이에 따른 굴착비용 산정시에 일반적으로 어려움이 많다. 그러므로 본 논문은 굴착 목적에서 서울 화강암에 대하여 객관적이고 정량적이고 쉽게 적용될 수 있는 암반판정 방법들을 제시한다. 슈미트해머와 점하중강도 시험들은 서울 화강암의 암석에 대한 일축압축강도를 정량적으로 추정하기 위한 신뢰도가 높고 손쉽게 수행할 수 있는 방법들로서 입중되었다. 또한 지표면에서 약 12m 깊이인 천부지역의 화강암 암반상태를 확인하기 위하여, 지반조건을 직접 관찰할 수 있는 수직 절취사면의 최상부에서 현장 탄성파탐사 방법이 사용되었다. 이로서 현장 탄성파탐사로서 암반 상태 및 깊이를 판단하는 신뢰성을 확인할 수 있었는데 매우 정확한 1 m의 오차만 있었다. 그러므로 비교적 천부인 서을 화강암 암반의 굴착난이도 상태를 판단하기 위하여 현장에서 절취사면에 대한 정밀 지반조사방법은 매우 유용하고 경제적인 방법으로서 고려될 수 있다.

  • PDF

패턴 제작 방법이 플레어스커트의 실루엣에 미치는 영향 (Effect of the Pattern Making Method on the Silhouette of the Flared Skirt)

  • 신영란;추미선
    • 한국의류산업학회지
    • /
    • 제10권6호
    • /
    • pp.989-996
    • /
    • 2008
  • The purpose of this study is to provide the basic knowledge for the pattern development of a flared skirt. Two flat pattern (FP) methods, the concentric circle method and the corrected concentric circle method, and a draping were used for pattern making. Using these patterns, skirts were made with lengthwise grain in the centerline. The influence of pattern making method on the silhouette of the flared skirt was evaluated by the hemlines formed at the skirt worn in a dress form. Moreover, the combined influence of pattern making method and cutting direction on the silhouette of the flared skirt was examined with the draping pattern (DP) skirt and a FP skirt with $45^{\circ}$ bias grain in the centerline. The DP skirt had more uniform nodes and formed a stable wave form than the FP skirts throughout the whole hemlines. The number of nodes was reduced with lining in the two FP skirts, whereas the number of nodes was not changed in the DP skirt. The unit wave form of all the skirts by three patterns showed long loop form, and the slope angles of the unit wave form of the two FP skirts were higher than that of the DP skirt. The silhouette of the flared skirt was highly influenced by the shape of the waist circumference line in patterns. The DP skirt with lengthwise grain in the centerline showed good silhouette with uniform nodes and high marking efficiency, compared to the FP skirt with $45^{\circ}$ bias grain in the centerline.

중규모 종합병원 대상 카바페넴 내성 장내세균속균종(Carbapenem-resistant Enterobacteriaceae) 획득위험 예측모형의 외적타당도 평가 (External Validation of Carbapenem-Resistant Enterobacteriaceae Acquisition Risk Prediction Model in a Medium Sized Hospital)

  • 서수민;정인숙
    • 대한간호학회지
    • /
    • 제50권4호
    • /
    • pp.621-630
    • /
    • 2020
  • Purpose: This study was aimed to evaluate the external validity of a carbapenem-resistant Enterobacteriaceae (CRE) acquisition risk prediction model (the CREP-model) in a medium-sized hospital. Methods: This retrospective cohort study included 613 patients (CRE group: 69, no-CRE group: 544) admitted to the intensive care units of a 453-beds secondary referral general hospital from March 1, 2017 to September 30, 2019 in South Korea. The performance of the CREP-model was analyzed with calibration, discrimination, and clinical usefulness. Results: The results showed that those higher in age had lower presence of multidrug resistant organisms (MDROs), cephalosporin use ≥ 15 days, Acute Physiology and Chronic Health Evaluation II (APACHE II) score ≥ 21 points, and lower CRE acquisition rates than those of CREP-model development subjects. The calibration-in-the-large was 0.12 (95% CI: - 0.16~0.39), while the calibration slope was 0.87 (95% CI: 0.63~1.12), and the concordance statistic was .71 (95% CI: .63~.78). At the predicted risk of .10, the sensitivity, specificity, and correct classification rates were 43.5%, 84.2%, and 79.6%, respectively. The net true positive according to the CREP-model were 3 per 100 subjects. After adjusting the predictors' cutting points, the concordance statistic increased to .84 (95% CI: .79~.89), and the sensitivity and net true positive was improved to 75.4%. and 6 per 100 subjects, respectively. Conclusion: The CREP-model's discrimination and clinical usefulness are low in a medium sized general hospital but are improved after adjusting for the predictors. Therefore, we suggest that institutions should only use the CREP-model after assessing the distribution of the predictors and adjusting their cutting points.

매리 땅밀림형 산사태(山沙汰)의 발생특성(發生特性)에 관한 분석(分析) (I) - 지형(地形) 및 지질특성(地質特性)을 중심(中心)으로 - (Analysis on the Characteristics of the Landslide in Maeri (I) - With a Special Reference on Geo-Topographical Characteristics -)

  • 박재현;최경;배종순;마호섭;이종학
    • 한국산림과학회지
    • /
    • 제94권3호통권160호
    • /
    • pp.129-134
    • /
    • 2005
  • 이 연구는 김해시 상동면 매리 산사태지 1.5 ha에서의 발생특성 및 원인을 밝히기 위하여 수행한 것으로써 지형 및 지질적인 요인을 조사 분석하였다. 조사대상지의 모암은 섬록암이며, 상부사면 및 주변은 마산암으로 이루어져 있고, 너덜(Talus)이 산재하고 있는 것으로 나타났다. 이 산사태는 2004년 4월 19일에 발생되었으며, 산사태 발생 전 3일 동안의 연속강우량은 74 mm이었으나, 강우가 직접적인 영향이라기보다는 간접적인 영향을 미친 것으로 판단된다. 또한, 이 지역 땅밀림 산사태의 직접적인 원인은 깊게 형성된 붕적토층과 풍화토층 등 지질 지형적인 특성과 사면하단부 절취라 판단된다. 이 지역의 산사태 유형은 지하수에 의한 요(凹)지형 붕적토 땅밀림형 산사태에 해당한다.