• 농촌계획
• /
• 제23권2호
• /
• pp.87-96
• /
• 2017

This study is a basic research with the aim of developing the method of judging the leakage zone by grasping the habitat characteristic of agricultural reservoir slope in inhabiting characteristics appear differently according to natural inhabiting environment. To this end, this study is intending to investigate slope vegetation using a quadrat technique at Sinheung reservoir located at Gwangsi-myeon, Yesan-gun, Chungnam, and to perform the analysis of importance value using relative frequency and relative coverage, etc. Also, this study intended to present the necessity of having to consider the eco-system of the relevant region in time of a reservoir slope afforestation for the time to come by suggesting that the reservoir slope vegetation after a stable period becomes similar to the regional vegetation by comparing this study result with the existing research which carried out the analysis of importance value of forest vegetation for Yesan Region. The reservoir slope vegetation is similar to the indicator species which appear in the regional forest vegetation, so there was a need to select afforestation species in the light of this in time of slope afforestation. As a result of the analysis of the importance value, this study grasped that there was an emergence characteristic similar to the vegetation at a birthplace of a forest fires because growth and development of forest trees, and perennial plants were restricted by annually implemented brush-cutting work, etc.; however, indigo plant and bush clover, etc. were found to show the characteristic differing from this. Consequently, this study was able to confirm that there is the necessity of having to create the Importance Value Table suited for reservoir slopes by region through a lot more data construction in the near future.

• 한국CDE학회논문집
• /
• 제7권3호
• /
• pp.148-156
• /
• 2002

Most Rapid Prototyping (RP) processes adopt a solid Computer Aided Design (CAD) model, which will be sliced into thin layers of constant thickness in the building direction. Each cross-sectional layer is successively deposited and, simultaneously, bonded onto the previous layer; and eventually the stacked layers from a physical part of the model. A new RP process, the transfer-type Variable Lamination Manufacturing process using expandable polystyrene foam sheet (VLM-ST), has been developed to reduce building time and to improve the surface finish of parts with the thick layers and a sloping surface. This paper describes the generation of Unit Shape Layer (USL), the cutting path data of the linen. hotwire cutter for the VLM-ST process. USL is a three-dimensional layer with a thickness of more than 1 mm and a side slope, and it is the basic unit of cutting and building in the VLM-ST process. USL includes data such as layer thickness, positional coordinates, side angles of each layer, hotwire cutting speed, the heat input to the hotwire, and reference shape. The procedure of generating USL is as follows: (1)Generation of the mid-slice from the CAD model, (2)Conversion of the mid-slice into a simply connected domain, (3)Generation to the reference shape for the mid-slice, (4)Calculation of the rotation angle of the hotwire of the cutting system.

• 지질공학
• /
• 제17권1호
• /
• pp.101-113
• /
• 2007

본 연구는 동해고속도로 확장공사구간에서 도로시공을 위한 사면 절개시 산사태가 발생된 현장을 대상하였다. 대상현장의 산사태 규모는 평면적으로 사면 폭이 100m, 사면높이가 87m로서 전체면적은 약 $9,550m^2$ 정도이다. 대상현장의 산사태는 지반 내 점토층이 존재하는 취약한 지질구조에 의한 내적요인과 사면절개 및 지속적인 강우에 의한 외적요인에 의해 발생된 것이다. 산사태 발생 직후 현장계측결과 사면지반의 수평변위는 우기철의 지속적인 강우로 인하여 누적강우량이 증가함에 따라 계속적으로 증가함을 알 수 있다. 그리고 산사태 발생시 측정된 사면지반의 수평변위를 통하여 사면활동면의 깊이를 결정할 수 있다. 현장계측을 통하여 사면활동면 발생 깊이에서부터 사면지반의 수평변위가 증가됨을 확인할 수 있으며, 사면활동면 발생 깊이는 점토층이 분포하고 있는 깊이와 일치함을 알 수 있다. Bishop의 간편법을 이용한 사면안정해석결과 강우시 사면안전율은 0.53으로 산사태가 발생가능성이 매우 큰 것으로 나타났으며, 사면활동면의 발생 깊이는 현장계측을 통하여 측정된 점토층이 분포하고 있는 깊이와 일치함을 알 수 있다.

• 한국환경복원기술학회지
• /
• 제8권3호
• /
• pp.13-20
• /
• 2005

This study was conducted to suggest the ecological restoration methods of the decomposed granite cut-slope by organic soil amendment materials. Field test carried out for the cut-slope with organic soil amendment materials method and other three revegetation methods in Cheongwon. Test revegetation plants were Festuca arundinacea, Lolium perenne, Dactylis glomerata, Lespedeza cyrtobotrya, and Arundinella hirta. The result of this study can be summarized as follows; 1. The soil hardness, the soil acidity, and the soil humidity of organic soil amendment materials method were at a suitable value for plants growth. And it was better as compared with other three revegetation methods of cutting-rock slopes. 2. The result of toxic substance investigation, all items were at a suitable for standard law. 3. During one year after seeding, most plants germinated and especially Festuca arundinacea and Dactylis glomerata grows well. Seedling numbers were 336.7 per $m^2$(after 6 months), 183.3 per $m^2$(after 10 months), and 353.3 per $m^2$(after 6 months). Ten months later after seeding, plants showed 80% ground coverage. Visual rate, plant height, and growth rate were excellence, Also, high plant growth in spring better than autumn.

• 한국지반공학회논문집
• /
• 제15권6호
• /
• pp.3-16
• /
• 1999

본 논문은 새로 개발된 파괴형태를 고려한 암반사면의 신뢰도해석 모델의 검증을 위하여 예제를 통한 민감도해석을 수행하였고 그 결과를 수록하였다. 민감도분석에 이용된 매개변수는 암반 불연속면의 공학적 특성 (불연속면의 방향 및 강도),하중조건 및 암반사면의 기하학적 형상 등이다. 확률론적 해석에서 고려할 수 있는 불연속면의 방향 및 마찰각의 통계적 특성이 파괴형태를 고려한 암반사면의 안정에 큰 영향을 보였다. 암반사면의 안정은 굴착면의 방향에 가장 민감하였다. 예제분석을 통하여 개발된 파괴형태를 고려한 암반사면의 신뢰도모델은 암반사면의 안정성 조사에 성공적으로 적용할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.171-178
• /
• 2005

It is unavoidable to be formed slopes under special circumstance of Korea where 70% of the whole area are composed of mountains when civil engineering projects such as roads, site developments are increased with industrial development and horizontal expansions of urban area. Moreover, stability of the slopes become one of quite important issues under special meteorological characteristics that over two-thirds of annual average rainfall are concentrated in summer season and the localized torrential downpour are getting more frequent recently. Resulting in these circumstances, partial slope failures by debris flow of the high water content soils are occurred frequently in cutting soil slopes. In this case of debris flow slope failure, slope declination method are selected for their stable recovery because it is impossible to recover entirely by existing recovery methods. Seeding or special grass planting methods are followed separately without exception. The method by which entire recover with bigger stability ratio would be possible and grass planting work would be done simultaneously is developed. In this study, the results of the tests including a real construction history in a failed slope using developed method are described

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.8-15
• /
• 2016

Most machines lose a lot of energy due to friction. Wear due to friction also reduces performance. Therefore, it is important to reduce friction on the surface to improve energy efficiency and decrease wear. Surface texturing refers to making patterns on the surface for reducing friction. There are many surface texturing methods, such as using lasers, abrasive jet machining, and so on. Recently, mechanical manufacturing methods, such as cutting and grinding, have been highlighted. Among them, the grinding method has the advantage of making patterns in large areas quickly. Therefore, it is appropriate for surface texturing on large machines. This paper is a study on the slope change of the surface texturing pattern using grinding. Therefore, we researched the slopes of the patterns corresponding to "spindle speed and feed rate" and "curvature of workpiece surface" using a mathematical model and experiment. As a result, we made a proper mathematical model concerning our research. Therefore, using the mathematical model in this paper, we could predict the slope change of the pattern according to grinding conditions.

• 한국지반신소재학회논문집
• /
• 제6권2호
• /
• pp.27-32
• /
• 2007

본 연구에서는 절토사면 공법선정시 고려해야 할 영향인자에 대한 가중치 결정과 사면보강공법 선호도를 AHP기법을 이용하여 분석하였다. 연구, 설계, 시공업에 종사하고 있는 전문가를 대상으로 분석한 결과 공법선택시 안정성 및 내구성, 환경성이 가장 중요한 영향인자로 조사되었으며, 안전율 증가법 위주로 분석된 사면보강공법 선호도 조사에서는 경제성과 유지관리 용이성, 안정성에서 가장 우수한 평가를 받은 옹벽공법과 절토공법이 가장 선호도가 높은 공법으로 분석되었다.

• 한국농공학회지
• /
• 제23권1호
• /
• pp.86-102
• /
• 1981

The soil test data of 28 earth dams, scheduled to be constructed in Kore3, were selected for this study. The safety factors of their side slops were computed using Fellenius' "slice Method" by computer. The results summarized in this study are as follows; 1. Dam sections can be easily determined by fig.10 without a time consuming trial and error calculations of assumed sections. 2. For the economical design of earth dam sections, it was found that more cohesive soil was suitable for lower dams(dam height less than 25m) and soils with a higher friction angle was better for higher dams 3. In the case that used soil materials have the same Internal friction angle, side slope increase was almost same. 4. The relationship between side slope and friction angle was found as log.S=a tan ø+b (Fig. 7) 5. The relationship between side slope and cohesion (c) was also found as log. S=a c+b (Fig. 8) 6. The change of safety factors due to the change of central core materials was very little (Table-2) 7. The decrease of safety factors according to the unit weight increase of embankment materials was negligible. 8. In general the relationship between the wet unit weight and the saturated unit weight was r sat = (rt)$^2$+0. 140. This study will contribute to the determination of economic and safe planning and designing of earth dams, embankments and cutting side slopes.

• 아시안잔디학회지
• /
• 제9권3호
• /
• pp.173-185
• /
• 1995

Hydroseeding technique is a very popular method of revegetating slope areas through the control of soil erosion and stability by seeding grasses. This study was conducted to select turfgrass species and cultivars for hydroseeding. Experiment plots were established on various soil types and environmental conditions at Singar-Ansan high-way construction site. The investigation was designed in three cutting, one back-filling and other three spare sites with various seed mixtures. Results indicated that combinations of seed mixtures influenced seed germination and rates of surface cover. In a view of long term, vegetation shifts should be influenced by characters of slopes and micro-climate conditions. Hydroseeding did not show good results on rocky slope areas. Revegetation was only going on where there had soil. The combination of seed mixture with a higher rate of perennial ryegrass had relatively good revegetation with faster germination and seedling growth. Improved turf-type tall fescue Arid ⓡ and Falcon ⓡ seemed to have good environ-mental adaptation and drought tolerance. Wild or old type cultivars showed relatively slow green-up in spring and growth rates at the next year of seeding. For the harmonious landscaping with surrounding area, the combination of native grass mixture with cool-season grasses had good results. Slow and low revegetation rate at hack-filling site seemed to be caused by the poor development of capillary tubes in sub-soil. It was shown that a high correlation between seed germination and revegetation rate, and between three-month later coverage rate and final rate. The evaluation of coverage rate after three month seems to he acceptable to decide the accomplishment of hydroseeding results on rode side slopes.