• Title/Summary/Keyword: cutting efficiency

Search Result 453, Processing Time 0.029 seconds

A Study on Economical Analysis of Yarding Operation by Cable Crane (케이블클레인을 이용(利用)한 집재작업(集材作業)의 경제성(經濟性)에 관(關)한 연구(硏究))

  • Woo, Bo Myeong;Park, Jong Myeong;Lee, Joon Woo;Chung, Nam Hun
    • Journal of Korean Society of Forest Science
    • /
    • v.79 no.4
    • /
    • pp.413-418
    • /
    • 1990
  • Since 1945, the periodical reforestation projects considered as the fundamental apparatus of the forest policy of the Government have been continuously carried out during last 40 years in Korea. As a result, some of the forests are ready to be harvested, especially in well-managed plantations as well as in the natural forests. This requires to pay more attention to harvesting the timber rather than planting trees. At the present, such timber harvesting operations such as cutting, felling, bucking, and skidding and yarding, particularly yarding operations in mountain areas with harsh terrains are in the most cases depend upon man power. However, the yarding operations should be more mechanized in the near future in Korea mainly because of the high cost of labour couppled with the lack of labour in forested areas. The Forest Work Training Center attached to the Forest Administration imported and tested the smallsized cable crane(K-300) with movable tower. The result of economic analysis of the yarding operation expenditures shows that the cable crane yarding costs more than the man yarding at the present time. As the labour cost will gradually increase and the efficiency of machine operation will improve, the results of the study indicates that the yarding operation by cable crane will be more cost-effective in the future.

  • PDF

Effect of milling and sintering process on integrity of zirconia prosthesis: a literature review (밀링과 소결과정이 지르코니아 보철물의 완성도에 미치는 영향에 관한 문헌고찰)

  • Lee, Kiun;Ko, Kyung-Ho;Huh, Yoon-Hyuk;Park, Chan-Jin;Cho, Lee-Ra
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.38 no.3
    • /
    • pp.127-137
    • /
    • 2022
  • Zirconia is fabricated through various processes. Each element in fabricating process can affect the physical properties of the definitive prosthesis. In particular, both the milling process and the sintering process can affect the final integrity of the zirconia prosthesis. Most of the milling machines adopt the ultra-precision 5-axis machining method, and the results vary depending on which milling method was used and how the milling equipment was managed. Milling blocks are selected according to cutting efficiency and aesthetic reproducibility. The sintering method can affect the grain growth and optical properties, and an accurate evaluation can be made only with additional research on the recent speed sintering procedure. Not only the sintering temperature but also the temperature holding time can affect the quality of definitive prosthesis.

Approaches to Applying Social Network Analysis to the Army's Information Sharing System: A Case Study (육군 정보공유체계에 사회관계망 분석을 적용하기 위한방안: 사례 연구)

  • GunWoo Park
    • The Journal of the Convergence on Culture Technology
    • /
    • v.9 no.5
    • /
    • pp.597-603
    • /
    • 2023
  • The paradigm of military operations has evolved from platform-centric warfare to network-centric warfare and further to information-centric warfare, driven by advancements in information technology. In recent years, with the development of cutting-edge technologies such as big data, artificial intelligence, and the Internet of Things (IoT), military operations are transitioning towards knowledge-centric warfare (KCW), based on artificial intelligence. Consequently, the military places significant emphasis on integrating advanced information and communication technologies (ICT) to establish reliable C4I (Command, Control, Communication, Computer, Intelligence) systems. This research emphasizes the need to apply data mining techniques to analyze and evaluate various aspects of C4I systems, including enhancing combat capabilities, optimizing utilization in network-based environments, efficiently distributing information flow, facilitating smooth communication, and effectively implementing knowledge sharing. Data mining serves as a fundamental technology in modern big data analysis, and this study utilizes it to analyze real-world cases and propose practical strategies to maximize the efficiency of military command and control systems. The research outcomes are expected to provide valuable insights into the performance of C4I systems and reinforce knowledge-centric warfare in contemporary military operations.

Estimation of Cerchar abrasivity index based on rock strength and petrological characteristics using linear regression and machine learning (선형회귀분석과 머신러닝을 이용한 암석의 강도 및 암석학적 특징 기반 세르샤 마모지수 추정)

  • Ju-Pyo Hong;Yun Seong Kang;Tae Young Ko
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.26 no.1
    • /
    • pp.39-58
    • /
    • 2024
  • Tunnel Boring Machines (TBM) use multiple disc cutters to excavate tunnels through rock. These cutters wear out due to continuous contact and friction with the rock, leading to decreased cutting efficiency and reduced excavation performance. The rock's abrasivity significantly affects cutter wear, with highly abrasive rocks causing more wear and reducing the cutter's lifespan. The Cerchar Abrasivity Index (CAI) is a key indicator for assessing rock abrasivity, essential for predicting disc cutter life and performance. This study aims to develop a new method for effectively estimating CAI using rock strength, petrological characteristics, linear regression, and machine learning. A database including CAI, uniaxial compressive strength, Brazilian tensile strength, and equivalent quartz content was created, with additional derived variables. Variables for multiple linear regression were selected considering statistical significance and multicollinearity, while machine learning model inputs were chosen based on variable importance. Among the machine learning prediction models, the Gradient Boosting model showed the highest predictive performance. Finally, the predictive performance of the multiple linear regression analysis and the Gradient Boosting model derived in this study were compared with the CAI prediction models of previous studies to validate the results of this research.

Study on economic effects of outsourcing of food materials on the hotel kitchen - Focus on cooking Western food in the first class hotel - (식재료 아웃소싱이 경제적 주방에 미치는 영향에 관한 연구 - 특1급호텔 양식조리를 중심으로 -)

  • 성태종
    • Journal of Applied Tourism Food and Beverage Management and Research
    • /
    • v.13 no.2
    • /
    • pp.45-69
    • /
    • 2002
  • This study is designed to examine feasibility and limitation of outsourcing in cooking Western food in a hotel, to interpret importance of outsourcing(eg. outside order, outside procurement, outside supply) in a broad sense in order to reinforce the core capacity in the cooking department, and to know whether the cooking human power is efficiently used and how much the chefs recognize outsourcing of food materials. As many companies conduct restructuring to cut down its size, the reduction of human power led the Western food cooking in the hotel to lower core capacities, lower quality, and lower efficiency. In addition, the sagging morale of chefs undermined creativity. To change from the traditional kitchen to an economic kitchen needs to look into importance of outsourcing, cognitive attitude of chefs, relation with outside suppliers. Here suggests performance of positive changes in the structure The study examined feasibility and limitation of outsourcing in the hotel kitchen as well as chefs' cognitive attitude toward outsourcing of food materials to reinforce core capabilities of the hotel kitchen. 1. Companies of outsourcing are selected according to variability of price conditions, flexibility of contract conditions, popularity of the outsourcing company, and reputation of the outsourcing company. 2. The importance of outsourcing in the Western food cooking is divided into 4 factors such as standard of selecting outsourcing companies, policies of cooking manu, quality of cooking, and quantity of cooking. 3. The most feasible section in outsourcing of food materials is a process of kneading flour for bread, which shows that many Western-food chefs expect to put higher possibility of outsourcing on the kneading. In other words, when it comes to confectionery and bakery, there are many outside expert processing companies supplying high quality products. In the order of outsourcing feasibility, sauce is followed by processed vegetable, garnish of main dish, and soup. The least feasible section in outsourcing of food materials is appetize. Appetize includes a concept of a improvised dish and needs speed. Due to its color, freshness, and sensibility of taste, the appetize plays a key role in the Western food cooking. 4. When outsourcing is taken in place, the highest risk is to lower the inner cooking skills. Therefore chefs in charge of the Western food sequently recognize both internal problems including storage of cooking skills, unstability of layoffs, and loss of cooperation between departments, and external problems including inferior goods, difficulty of differentiating manu, delay of delivery, and expiration date. It shows that most of the Western food chefs consider risks of the internal problems at first. 5. A effective outsourcing needs appropriate selection of outsourcing companies, maintenance of credibility, active communication, check and management of hygiene. However regardless of their position or career, chefs in charge of the Western food have the same cognitive attitude toward selecting successful outsourcing companies after the outsourcing system is enforced. The core of cooking, or a final stage in the full process of so-called artistic cooking, should be treated with insourcing. Reduction of several cooking processes resulted in shortened cooking time, increased efficiency, faster cooking, cutting the waiting-lines, and finally more room for customers. The outsourcing system can reduce or eliminate the following processes in cooking: buying various food materials, checking, storing, preparing, and processing. Especially in the Western food cooking department of a hotel, the outsourcing system should be enforced to make an economic kitchen and to efficiently manage it. Wow it's time to change from the traditional kitchen to an economic kitchen in the hotel cooking department. For that, the cooking department should become a small but strong organization by outsourcing except its core work.

  • PDF

The Efficiency and Improvement of the Highway Wild-Life Fences for Decrease of Mammals Road-kill - In Case of Manjong~Hongchun Section on Jungang Highway - (포유류 로드킬 저감을 위한 고속도로 유도울타리 효율성 및 개선방안 연구 - 중앙고속도로 만종~홍천 구간을 사례로 -)

  • Song, Jeong-Seok;Lee, Kyong-Jae;Ki, Kyong-Seok;Jun, Ik-Yo
    • Korean Journal of Environment and Ecology
    • /
    • v.25 no.5
    • /
    • pp.649-657
    • /
    • 2011
  • This study had targeted the Manjong Junction~Hongchun interchange section of Jungang highway in order to analyze the efficiency and improvement of the highway wild-life fences. Being analyzed wild-life fence as an effective facility for the prevention of road-kill, it had founded that the wild animals did not jump over even the two layer guardrail, concrete barrier and noise barrier, fence for rock fall. For the section with high road-kill decrease effect after installing the wild-life fence, the effect was higher at wild-life fence with the height of 1.0m where the door had not been installed and the well connected points of road facility than the area with fence height of 1.5m. The road-kill decrease effect was also high at the well managed areas even if the door has not been installed. Also, road-kill had occurred by concentrating around the end of wild-life fence after installing the fence, Moreover road-kill had also occurred around the cutting section. The door of wild-life fence had higher amount of road-kill occurrence as the installation interval was closer. it was analyzed that the door management has a lot of effect on road-kill decrease. The fence for rock fall, two layer guardrail and concrete barrier having the effect of wild-life fence installed on the road would have to be installed by connecting with wild-life fences through proper facility improvement. Although the door should not be installed if possible, it should be installed as automatic door or gravity door to prevent the door from leaving the door open. An escape route has to be formed for the prompt escape away from the road for the animals entered through the ending section of the fence. The eco-corridor has to be made by restoring the soil layer of dual purpose eco-corridor forming a planting area. Also, the dead body after the accident has to be disposed to the outer section of the road immediately in order to prevent the secondary road-kill by the predator from the road-kill. The fence has to be installed as 500m or longer in both ways, in other words 1,000m or longer, from the targeted spot of minimum accident prevention while connecting up to the bridge or box culvert, etc that are next road facilities if possible to guide wild animals safely to the eco-corridor.

A Study of Radon Reduction using Panel-type Activated Carbon (판재형 활성탄을 이용한 라돈 저감 연구)

  • Choi, Il-Hong;Kang, Sang-Sik;Jun, Jae-Hoon;Yang, Seung-Woo;Park, Ji-Koon
    • Journal of the Korean Society of Radiology
    • /
    • v.11 no.5
    • /
    • pp.297-302
    • /
    • 2017
  • Recently, building materials and air purification filters with eco-friendly charcoal are actively studying to reduce the concentration of radon gas in indoor air. In this study, radon reduction performance was assessed by designing and producing new panel-type activated carbon filter that can be handled more efficiently than conventional charcoal filters, which can reduce radon gas. For the fabrication of our panel-type activated carbon filter, first the pressed molding product after mixing activated carbon powder and polyurethane. Then, through diamond cutting, the activated carbon filter of 2 mm, 4 mm and 6 mm thickness were fabricated. To investigate the physical characteristics of the fabricated activated carbon filter, a surface area and flexural strength measurement was performed. In addition, to evaluate the reduction performance of radon gas in indoor, the radon concentration of before and after the filter passes from a constant amount of air flow using three acrylic chambers was measured, respectively. As a result, the surface area of the fabricated activated carbon was approximately $1,008m^2/g$ showing similar value to conventional products. Also, the flexural load was found to have three times higher value than the gypsum board with 435 N. Finally, the radon reduction efficiency from indoor gas improved as the thickness of the activated carbon increases, resulting in an excellent radon removal rate of more than 90 % in the 6 mm thick filter. From the experimental results, the panel-type activated carbon is considered to be available as an eco-friendly building material to reduce radon gas in an enclosed indoor environment.

Juvenile-Mature Correlation of the Tree Growth (임목성장량(林木成長量)의 조기추정(早期推定)에 관(關)한 연구(硏究))

  • Yim, Kyong Bin;Lee, Yo Ha;Kwon, Ki Won;Kim, Zin Suh
    • Journal of Korean Society of Forest Science
    • /
    • v.30 no.1
    • /
    • pp.30-41
    • /
    • 1976
  • The workers involved in breeding the growth of forest trees as well as in the efficiency of breeding work wish to find out the evidence that juvenile-mature correlations are high and that therefore early tests can be profitably employed in relation work. Juvenile-mature correlation denotes in general sense the interdependence between qualitative or quantitative data collected at different intervals during the life cycle. The correlation can also be obtained through the stem analysis if there is the possibility of cutting sample trees needed amount. In the present study, the juvenile-mature correlation coefficients are calculated from the stem analysis data. The every possible values of correlation coefficient between the 5-year age groups as to diameter, height, and volume growth of Pinus koraiensis S. et Z. and Larix leptolepis Gord. grown in the middle district of Korea were calculated. All the sample trees were cut from the man made plantation. The correlation coefficients are presented in tables and figures. In Pinus koraiensis S. et Z., the values of correlation coefficient between the successive age groups of heights growth are lower in general than those values pertaining to diameter growth. This tendencies are indifferent to site quality. In Larix leptolepis Gord., the values were lower thant these of Pinus koraiensis S.etZ. In any species and characteristics studied, the implications that at least 15 years growth character are related to 35 or 40 years size with reliability could be deduced. Through the relative ranking studies of diameter, height and volume growth of Larix leptolepis Gord., the large varieties among individual trees are appeared during 5-year to 35 year old.

  • PDF

Rewetting Strategies for the Drained Tropical Peatlands in Indonesia (인도네시아의 배수된 열대 이탄지에 대한 재습지화 전략)

  • Roh, Yujin;Kim, Seongjun;Han, Seung Hyun;Lee, Jongyeol;Son, Yowhan
    • Korean Journal of Environmental Biology
    • /
    • v.36 no.1
    • /
    • pp.33-42
    • /
    • 2018
  • The tropical peatlands have been deforested and converted to agricultural and plantation areas in Indonesia. To manage water levels and increase the overall productivity of crops, canals have been constructed in tropical peatlands. The canals destructed the structure of the tropical peatlands, and increased the subsidence and fire hazard risks in the region. The Indonesian government enacted regulations and a moratorium on tropical peatlands, in order to reduce degradation. A practical method under the regulations of rewetting tropical peatlands was to permit a canal blocking. In this study, four canal blocking projects were investigated regarding their planning, construction priority, design, building material, construction, monitoring, time and costs associated with the canal blockings. In the protected areas, regulations restricted the development of the tropical peatlands areas that were noted as deeper than 3 m, and the administration stopped issuing new concessions for future work projects for this noted criteria of land use. A noted purpose of canal blockings in these areas was to effectuate the restoration of the lands in the region. The main considerations of the restoration efforts were to maintain a durability of the blockings, and to encourage the participation of the area stakeholders. In the case of a concession area, regulations were set into place to restrict clear-cutting and shifting cultivation, and to maintain groundwater level in the tropical peatland. The most significant priorities identified in the canal blocking project were the efficiency and cost-effectiveness of the project. Nevertheless, the drainage of tropical peatlands has been continued. On the basis of a literature review on regulations and rewetting methods in tropical peatlands of Indonesia, we discussed the improvements of the regulations, and adequate canal blockings to serve the function to rewet the tropical peatlands in Indonesia. Our results would help establishing an adequate direction and recommended guideline on viable rewetting methods for the restoration of drained tropical peatlands in Southeast Asia.

Counter-terrorism Safety Measures in Public Facilities (다중이용시설의 대테러 안전대책)

  • Kim, Du-Hyun;Ahn, Kwang-Ho
    • Korean Security Journal
    • /
    • no.22
    • /
    • pp.37-64
    • /
    • 2010
  • Since the September 11, 2001, the motives and objectives of terrorism that have been targeted at hard targets such as key national facilities have now shifted towards soft targets such as subways, department stores, and tourist hotels; the attacks on these soft targets are steadily increasing. Simultaneous, unconventional, and indiscriminate terrorist attacks on civilians has also increased. In November, 2010, nearly forty states of the G20 and B20 (Business 20) will join in international summits to be hosted in Seoul. This coming July, an additional 350 troops will be deployed to Afghanistan for the sustainment of public security. Such events are sensitive topics, and there is the possibility of terrorist movement. Korea has successfully hosted various international events such as the APEC and ASEM Summits, and the 2002 Korea-Japan World Cup. The experiences from these events must be applied to ensure the safety of public facilities against the dangers of terrorism. First, counter-terrorism center must be established for the long-term, above the General Officer level to ensure the safety and efficiency of multilateral, international summits, as well as promoting policies and legislation aimed at preventing terrorism. Second, a terrorist threat management system must be secured and safety measures must be emphasized. Third, a fundamental structure must be established for the prevention of terrorism on public facilities, as well as legal and government action against the new threat of IED. Fourth, the police and fire fighting networks' must have a firm rapid response posture on the scene of an attack. Fifth, the state of mentality on the recognition of terrorist threats must be changed and restructured by promoting to and educating the population. Sixth, prevention measures must be established via research and academia. Seventh, for the guarantee of security in public facilities, safety management should employ cutting edge technology such as the 3D SICS and further develop and apply such technology. All methods and resources must be fully utilized for the establishment and strengthening terrorism prevention measures.

  • PDF